*N*,*e*,*N*,*N*,*PKG.1107*,*Jeu de normes sur la Stérilisation à l'oxyde (comprend les normes: CAN/CSA-Z314.1-FM91, CAN/CSA-Z314.2-FM91, CAN/CSA-Z314.9-FM89, CAN/CSA-Z314.12-FM91) [ID# 3523]*,**,* 148.00*,*01*,*A0*
*N*,*e*,*N*,*N*,*PKG.1108*,*Jeu de normes sur la Stérilistaion à la vapeur (comprend les normes: CAN/CSA-Z314.3-FM91, CAN/CSA-Z314.7-FM91, CAN/CSA-Z314.10-FM90, CAN/CSA-Z314.12-FM91) [ID# 3524]*,**,* 123.00*,*01*,*A0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.1-M90*,*Medical Electrical Equipment, Part 1: General Requirements for Safety [ID# 2794]*,**,* 122.00*,*01*,*A0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.1-92*,*Medical Electrical Equipment, Part 2: Particular Requirements for the Safety of Medical Electron Accelerators in the Range 1 MeV to 50 MeV (Adopted IEC 601.2.1:1981) [ID# 3438]*,**,* 54.00*,*01*,*A0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.1-F92*,*Appareils électromédicaux--Deuxième partie: Règles particulières pour accélérateurs médicaux d'électrons dans la gamme 1 MeV à 50 MeV (norme CEI 601-2-1:1981 adoptée) [ID# 4170]*,**,* 54.00*,*01*,*A0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.2-92*,*Medical Electrical Equipment, Part 2: Particular Requirements for the Safety of High Frequency Surgical Equipment (Adopted IEC 601-2-2:1990) [ID# 3439]*,**,* 60.00*,*01*,*A0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.2-F92*,*Appareils électromédicaux--Deuxième partie: Règles particulières de sécurité pour appareils d'électrochirurgie à courant haute fréquence (norme CEI 601-2-2:1990 adoptée) [ID# 4496]*,**,* 60.00*,*01*,*A0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.3-92*,*Medical Electrical Equipment, Part 2: Particular Requirements for the Safety of Short-Wave Therapy Equipment (Adopted IEC 601-2-3:1991) [ID# 3440]*,**,* 42.00*,*01*,*A0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.3-F92*,*Appareils électromédicaux--Deuxième partie: Règles particulières de sécurité pour appareils de thérapie à ondes courtes (norme CEI 601-2-3:1991 adoptée) [ID# 4497]*,**,* 42.00*,*01*,*A0*
*Y*,*x*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.4-M90*,*Medical Electrical Equipment, Part 2: Particular Requirements for the Safety of Cardiac Defibrillators and Cardiac Defibrillator-Monitors [ID# 2807]*,**,* 63.00*,*01*,*A0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.5-92*,*Medical Electrical Equipment, Part 2: Particular Requirements for the Safety of Ultrasonic Therapy Equipment (Adopted IEC 601-2-5:1984) [ID# 3441]*,**,* 41.00*,*01*,*A0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.5-F92*,*Appareils électromédicaux--Deuxième partie: Règles particulières de sécurité pour appareils à ultrasons pour thérapie (norme CEI 601-2-5: 1984 adoptée) [ID# 4174]*,**,* 41.00*,*01*,*A0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.6-92*,*Medical Electrical Equipment, Part 2: Particular Requirements for the Safety of Microwave Therapy Equipment (Adopted IEC 601-2-6:1984) [ID# 3442]*,**,* 35.00*,*01*,*A0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.6-F92*,*Appareils électromédicaux--Deuxième partie: Règles particulières de sécurité pour appareils de thérapie à micro-ondes (norme CEI 601-2-6: 1984 adoptée) [ID# 4175]*,**,* 35.00*,*01*,*A0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.7-92*,*Medical Electrical Equipment, Part 2: Particular Requirements for the Safety of High-Voltage Generators of Diagnostic X-Ray Generators (Adopted IEC 601-2-7:1987) [ID# 3443]*,**,* 95.00*,*01*,*A0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.7-F92*,*Appareils électromédicaux--Deuxième partie: Règles particulières de sécurité pour générateurs radiologiques de groupes radiogènes de diagnostic (norme CEI 601-2-7: 1987 adoptée) [ID# 4184]*,**,* 95.00*,*01*,*A0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.8-92*,*Medical Electrical Equipment, Part 2: Particular Requirements for the Safety of Therapeutic X-Ray Generators (Adopted IEC 601-2-8:1987) [ID# 3444]*,**,* 60.00*,*01*,*A0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.8-F92*,*Appareils électromédicaux--Deuxième partie: Règles particulière de sécurité pour groupes radiogènes de radiothérapie (norme CEI 601-2-8:1987 adoptée) [ID# 4498]*,**,* 60.00*,*01*,*A0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.9-92*,*Medical Electrical Equipment, Part 2: Particular Requirements for the Safety of Dosimeters Used in Radiotherapy with Electrically-Connected Radiation Detectors (Adopted IEC 601-2-9:1987) [ID# 3445]*,**,* 35.00*,*01*,*A0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.9-F92*,*Appareils électromédicaux--Deuxiéme partie: Règles particulières de sécurité pour dosimètres utilisés en radiothérapie avec des détecteurs de rayonnement connectés électriquement (norme CEI 601-2-9:1987 adoptée) [ID# 4185]*,**,* 35.00*,*01*,*A0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.10-92*,*Medical Electrical Equipment, Part 2: Particular Requirements for the Safety of Nerve and Muscle Stimulators (Adopted IEC 601-2-10:1987) (rp:10/92) [ID# 3446]*,**,* 47.00*,*01*,*A0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.10-F92*,*Appareils électromédicaux--Deuxième partie: Règles particulières de sécurité pour stimulateurs de nerfs et de muscles (norme CEI 601-2-10:1987 adoptée) [ID# 4500]*,**,* 47.00*,*01*,*A0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.11-92*,*Medical Electrical Equipment, Part 2: Particular Requirements for the Safety of Gamma Beam Therapy Equipment (Adopted IEC 601-2-11:1987) [ID# 3447]*,**,* 54.00*,*01*,*A0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.11-F92*,*Appareils électromédicaux--Deuxième partie: Règles particulières de sécurité pour équipements de gammathérapie (norme CEI 601-2-11:1987 adoptée) [ID# 4501]*,**,* 54.00*,*01*,*A0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.14-92*,*Medical Electrical Equipment, Part 2: Particular Requirements for the Safety of Electroconvulsive Therapy Equipment (Adopted IEC 601-2-14:1989) [ID# 3448]*,**,* 45.00*,*01*,*A0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.14-F92*,*Appareils électromédicaux--Deuxième partie: Règles particulières de sécurité pour appareils de thérapie par électroconvulsions (norme CEI 601-2-14:1989 adoptée) [ID# 4502]*,**,* 45.00*,*01*,*A0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.15-92*,*Medical Electrical Equipment, Part 2: Particular Requirements for the Safety of Capacitor Discharge X-Ray Generators (Adopted IEC 601-2-15:1988) [ID# 3449]*,**,* 50.00*,*01*,*A0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.15-F92*,*Appareils électromédicaux--Deuxième partie: Règles particulières de sécurité pour groupes radiogènes à décharge de condensateur (norme CEI 601-2-15:1988 adoptée) [ID# 4503]*,**,* 50.00*,*01*,*A0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.16-92*,*Medical Electrical Equipment, Part 2: Particular Requirements for the Safety of Haemodialysis Equipment (Adopted IEC 601-2-16:1989) [ID# 3437]*,**,* 47.00*,*01*,*A0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.16-F92*,*Appareils electromedicaux--Deuxieme partie: Regles particulieres relatives a lasecurite de l'equipement d'hémodialyse (norme CEI 601-2-16:1989 adoptée) [ID# 4504]*,**,* 47.00*,*01*,*A0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.18-92*,*Medical Electrical Equipment, Part 2: Particular Requirements for the Safety of Endoscopic Equipment (Adopted IEC 601-2-18:1990) [ID# 3436]*,**,* 34.00*,*01*,*A0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.18-F92*,*Appareils électromédicaux--Deuxième partie: Règles particulières de sécurité pour appareils d'endoscopie (norme CEI 601-2-18:1990 adoptée) [ID# 4507]*,**,* 34.00*,*01*,*A0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.19-92*,*Medical Electrical Equipment, Part 2: Particular Requirements for the Safety of Baby Incubators (Adopted IEC 601-2-19:1990) [ID# 3425]*,**,* 44.00*,*01*,*A0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.19-F92*,*Appareils électromédicaux--Deuxième partie: Règles particulières de sécurité des incubateurs pour bébés (norme CEI 601-2-19:1990 adoptée) [ID# 4508]*,**,* 44.00*,*01*,*A0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.20-92*,*Medical Electrical Equipment, Part 2: Particular Requirements for the Safety of Transport Incubators (Adopted IEC 601-2-20:1990) [ID# 3424]*,**,* 46.00*,*01*,*A0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-C22.2 NO. 601.2.20-F92*,*Appareils électromédicaux--Deuxième partie: Règles particulières de sécurité des incubateurs de transport (norme CEI 601-2-20:1990 adoptée) [ID# 4509]*,**,* 46.00*,*01*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z32.2-M89*,*Electrical Safety in Patient Care Areas [ID# 2591]*,**,* 75.00*,*01*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z32.2-FM89*,*Sécurité en matière d'électricité dans les aires de soins [ID# 2798]*,**,* 75.00*,*01*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z32.4-M86*,*Essential Electrical Systems for Hospitals [ID# 507]*,**,* 45.00*,*01*,*A0*
*Y*,*e*,*N*,*Y*,*CAN3-Z168.2-FM82*,*Raccords de tubes trachéaux [ID# 868]*,**,* 21.00*,*01*,*A0*
*Y*,*f*,*N*,*Y*,*CAN3-Z168.3-M84*,*Continuous-Flow Inhalation Anaesthetic Apparatus (Anaesthetic Machines) for Medical Use [ID# 871]*,**,* 39.00*,*01*,*A0*
*Y*,*e*,*N*,*Y*,*CAN3-Z168.3-FM84*,*Appareils d'anesthésie par inhalation, à débit continu, pour usage médical [ID# 870]*,**,* 39.00*,*01*,*A0*
*N*,*x*,*N*,*Y*,*Z168.3S1-M1991*,*Supplement No. 1-M1991 to CAN3-Z168.3-M84, Anaesthetic Machines for Medical Use [ID# 2835]*,**,* 12.00*,*01*,*A0*
*Y*,*f*,*N*,*Y*,*CAN3-Z168.4-M83*,*Keyed Filling Devices for Anaesthetic Vaporizers [ID# 873]*,**,* 24.00*,*01*,*A0*
*Y*,*e*,*N*,*Y*,*CAN3-Z168.4-FM83*,*Dispositifs de remplissage clavetés pour évaporateurs d'anesthésie [ID# 872]*,**,* 24.00*,*01*,*A0*
*Y*,*e*,*N*,*Y*,*CAN3-Z168.7-FM83*,*Appareils de réanimation [ID# 878]*,**,* 27.00*,*01*,*A0*
*N*,*f*,*N*,*Y*,*CAN3-Z168.8-M82*,*Anaesthetic Gas Scavenging Systems [ID# 881]*,**,* 27.00*,*01*,*A0*
*N*,*e*,*N*,*Y*,*CAN3-Z168.8-FM82*,*Système d'évacuation des gaz anesthésiques [ID# 880]*,**,* 27.00*,*01*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z168.9-92*,*Breathing Systems for Use in Anaesthesia [ID# 2837]*,**,* 46.00*,*01*,*A0*
*N*,*f*,*Y*,*Y*,*Z168.10-M1988*,*Testing of Breathing Gas Interruption Monitors for Use During Anaesthesia [ID# 2289]*,**,* 64.00*,*01*,*A0*
*N*,*e*,*Y*,*Y*,*Z168.10-FM1988*,*Mise à l'essai des détecteurs de coupure de gaz d'inhalation utilisés en anesthésie [ID# 2513]*,**,* 64.00*,*01*,*A0*
*N*,*e*,*N*,*Y*,*Z303.1-FM1982*,*Électrocardiographes de diagnostic: Exigences minimales de performance [ID# 2184]*,**,* 36.00*,*01*,*A0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-Z305.1-92*,*Nonflammable Medical Gas Piping Systems [ID# 3105]*,**,* 81.00*,*01*,*A0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-Z305.1-F92*,*Réseaux de canalisations de gaz médicaux ininflammables [ID# 3639]*,**,* 81.00*,*01*,*A0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-Z305.2-M88*,*Low-Pressure Connecting Assemblies for Medical Gas Systems [ID# 2353]*,**,* 59.00*,*01*,*A0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-Z305.2-FM88*,*Ensembles de raccordement basse pression pour canalisations de gaz médicaux [ID# 2811]*,**,* 59.00*,*01*,*A0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-Z305.3-M87*,*Pressure Regulators, Gauges, and Flow-Metering Devices for Medical Gases [ID# 500]*,**,* 41.00*,*01*,*A0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-Z305.3-FM87*,*Régulateurs de pression, manomètres et débitmètres pour les gaz médicaux [ID# 2465]*,**,* 41.00*,*01*,*A0*
*Y*,*f*,*N*,*Y*,*CAN3-Z305.4-M85*,*Qualification Requirements for Agencies Testing Nonflammable Medical Gas Piping Systems [ID# 941]*,**,* 41.00*,*01*,*A0*
*Y*,*e*,*N*,*Y*,*CAN3-Z305.4-FM85*,*Exigences de qualification des organismes d'essai des réseaux de canalisations des gaz médicaux ininflammables [ID# 940]*,**,* 41.00*,*01*,*A0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-Z305.5-M86*,*Medical Gas Terminal Units [ID# 501]*,**,* 41.00*,*01*,*A0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-Z305.5-FM86*,*Prises pour les gaz médicaux [ID# 2467]*,**,* 41.00*,*01*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z305.6-92*,*Medical Oxygen Concentrator Central Supply System: For Use with Nonflammable Medical Gas Piping Systems [ID# 3415]*,**,* 60.00*,*01*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z305.6-F92*,*Centrale d'alimentation en oxygène médical avec concentrateur, pour réseaux de canalisations des gaz médicaux ininflammables [ID# 3640]*,**,* 60.00*,*01*,*A0*
*N*,*f*,*N*,*Y*,*CAN3-Z310.1-78 (R1984)*,*Titanium Alloy (6% Aluminum and 4% Vanadium) for Surgical Implants (e:3) [ID# 943]*,**,* 14.00*,*01*,*A0*
*N*,*e*,*N*,*Y*,*CAN3-Z310.1-F78 (C1984)*,*Alliage de titane (aluminium 6 % et vanadium 4 %) pour les prothèses internes [ID# 942]*,**,* 14.00*,*01*,*A0*
*N*,*f*,*N*,*Y*,*CAN3-Z310.2-78 (R1984)*,*Stainless Steel Bar and Wire for Surgical Implants (e:2) [ID# 945]*,**,* 14.00*,*01*,*A0*
*N*,*e*,*N*,*Y*,*CAN3-Z310.2-F78 (C1984)*,*Barres et fils en acier inoxydable pour les prothèses internes [ID# 944]*,**,* 14.00*,*01*,*A0*
*N*,*f*,*N*,*Y*,*CAN3-Z310.3-78 (R1984)*,*Stainless Steel Sheet, Strip, and Plate for Surgical Implants (e:2) [ID# 947]*,**,* 14.00*,*01*,*A0*
*N*,*e*,*N*,*Y*,*CAN3-Z310.3-F78 (C1984)*,*Tôle, feuillard et tôle forte en acier inoxydable pour les prothèses internes [ID# 946]*,**,* 14.00*,*01*,*A0*
*N*,*e*,*N*,*Y*,*CAN3-Z310.4-F78 (C1984)*,*Alliage forgé de cobalt, de chrome, de tungstène et de nickel pour les prothèses internes [ID# 948]*,**,* 14.00*,*01*,*A0*
*N*,*f*,*N*,*Y*,*CAN3-Z310.5-78 (R1984)*,*Cast Cobalt-Chromium-Molybdenum Base Alloy for Surgical Implants (e:2) [ID# 951]*,**,* 14.00*,*01*,*A0*
*N*,*e*,*N*,*Y*,*CAN3-Z310.5-F78 (C1984)*,*Alliage coulé de cobalt, de chrome et de molybdène pour les prothèses internes [ID# 950]*,**,* 14.00*,*01*,*A0*
*N*,*f*,*N*,*Y*,*CAN3-Z310.6-M84*,*Testing for Biocompatibility [ID# 953]*,**,* 49.00*,*01*,*A0*
*N*,*e*,*N*,*Y*,*CAN3-Z310.6-FM84*,*Essais de biocompatibilité [ID# 952]*,**,* 49.00*,*01*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z310.7 TO CAN/CSA-Z310.17-M91*,*Orthopaedic Implant Standards [ID# 3156]*,**,* 82.00*,*01*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z314.1-M91*,*Ethylene Oxide Sterilizers for Hospitals [ID# 3047]*,**,* 35.00*,*01*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z314.1-FM91*,*Stérilisateurs à l'oxyde d'éthylène en milieu hospitalier [ID# 3329]*,**,* 35.00*,*01*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z314.2-M91*,*Effective Sterilization in Hospitals by the Ethylene Oxide Process [ID# 3072]*,**,* 42.00*,*01*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z314.2-FM91*,*Stérilisation efficace à l'oxyde d'éthylène en milieu hospitalier [ID# 3352]*,**,* 42.00*,*01*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z314.3-M91*,*Effective Sterilization in Hospitals by the Steam Process [ID# 3069]*,**,* 46.00*,*01*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z314.3-FM91*,*Stérilisation efficace à la vapeur en milieu hospitalier [ID# 3351]*,**,* 46.00*,*01*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z314.4-87*,*Industrial Sterilization of Medical Devices by the Steam Process [ID# 502]*,**,* 46.00*,*01*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z314.4-F87*,*Stérilisation industrielle d'équipement médical à la vapeur [ID# 2335]*,**,* 46.00*,*01*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z314.5-88*,*Industrial Sterilization of Medical Devices by the Ethylene Oxide Process [ID# 2293]*,**,* 69.00*,*01*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z314.5-F88*,*Stérilisation industrielle du matériel médical à l'oxyde d'éthylène [ID# 2736]*,**,* 69.00*,*01*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z314.7-M91*,*Steam Sterilizers for Hospitals [ID# 3051]*,**,* 29.00*,*01*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z314.7-FM91*,*Stérilisateurs à la vapeur utilisés en milieu hospitalier [ID# 3328]*,**,* 29.00*,*01*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z314.8-M88*,*Reprocessing of Reusable Medical and Surgical Supplies [ID# 2336]*,**,* 59.00*,*01*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z314.8-FM88*,*Traitement du matériel médical et chirurgical réutilisable [ID# 2833]*,**,* 59.00*,*01*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z314.9-M89*,*Installation and Ventilation of Ethylene Oxide Sterilizers in Health Care Facilities (rp:09/91) [ID# 2549]*,**,* 59.00*,*01*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z314.9-FM89*,*Installation et ventilation des stérilisateurs à l'oxyde d'éthylène en milieu hospitalier (ps:09/91) [ID# 2841]*,**,* 59.00*,*01*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z314.10-M90*,*Selection, Use, Maintenance, and Laundry of Reusable Textile Wrappers for Sterilization Products in Health Care Facilities [ID# 2763]*,**,* 32.00*,*01*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z314.10-FM90*,*Sélection, utilisation, entretien et lavage des enveloppes textiles réutilisables pour la stérilisation dans les établissements de santé [ID# 3338]*,**,* 32.00*,*01*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z314.12-M91*,*Performance Requirements of Test Packs for Use in Hospitals [ID# 3073]*,**,* 38.00*,*01*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z314.12-FM91*,*Critères de performance des paquets d'essai utilisés dans les hôpitaux [ID# 3341]*,**,* 38.00*,*01*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z314.13-M92*,*Recommended Standard Practices for Emergency (Flash) Sterilization [ID# 3310]*,**,* 32.00*,*01*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z314.13-FM92*,*Pratiques normalisées recommandées pour la stérilisation d'urgence (stérilisation rapide) [ID# 3392]*,**,* 32.00*,*01*,*A0*
*N*,*x*,*N*,*Y*,*Z314.14-93*,*Selection and Use of Rigid Sterilization Containers [ID# 4484]*,**,* 42.00*,*01*,*A0*
*N*,*x*,*N*,*Y*,*Z316.1-M1979 (R1985)*,*Laboratory Water Baths (a:21) (e:1) [ID# 2201]*,**,* 16.00*,*01*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z316.3-M87*,*Biological Containment Cabinets: Installation and Field Testing [ID# 503]*,**,* 50.00*,*01*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z316.3-FM87*,*Installation et essai sur place des hottes biologiques [ID# 2486]*,**,* 50.00*,*01*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z317.1-88*,*Special Requirements for Plumbing Installations in Health Care Facilities (rp:05/89) [ID# 504]*,**,* 56.00*,*01*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z317.1-F88*,*Réseaux de plomberie dans les établissements de soins de santé : exigences particulières [ID# 2514]*,**,* 56.00*,*01*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z317.2-M91*,*Special Requirements for Heating, Ventilation, and Air Conditioning (HVAC) Systems in Health Care Facilities [ID# 2850]*,**,* 65.00*,*01*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z317.2-FM91*,*Systèmes de chauffage, de ventilation et de conditionnement d'air (CVCA) dans les établissements de soins de santé : exigences particulières [ID# 3340]*,**,* 65.00*,*01*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z317.5-M89*,*Illumination Systems in Health Care Facilities [ID# 2476]*,**,* 72.00*,*01*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z317.5-FM89*,*Systèmes d'éclairage dans les établissements de soins de santé [ID# 2698]*,**,* 72.00*,*01*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z317.10-88*,*Handling of Waste Materials Within Health Care Facilities [ID# 505]*,**,* 67.00*,*01*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z317.10-F88*,*Manipulation des déchets dans les établissements de soins médicaux [ID# 2466]*,**,* 67.00*,*01*,*A0*
*N*,*f*,*N*,*Y*,*CAN3-Z317.11-M82*,*Area Measurement for Health Care Facilities [ID# 967]*,**,* 36.00*,*01*,*A0*
*N*,*e*,*N*,*Y*,*CAN3-Z317.11-FM82*,*Mesurage des aires dans les établissements de soins médicaux [ID# 966]*,**,* 36.00*,*01*,*A0*
*N*,*x*,*N*,*Y*,*Z318.0-93*,*Commissioning of Health Care Facilities [ID# 4483]*,**,* 43.00*,*01*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z327-M91*,*Standards for User-Applied Drug Labels in Anaesthesia and Critical Care [ID# 2823]*,**,* 16.00*,*01*,*A0*
*N*,*f*,*N*,*Y*,*CAN3-Z364.1.1-M84*,*Hemodialysers, Hemofilters and Hemoconcentrators [ID# 995]*,**,* 27.00*,*01*,*A0*
*N*,*e*,*N*,*Y*,*CAN3-Z364.1.1-FM84*,*Hémodialyseurs, hémofiltres et hémoconcentrateurs [ID# 994]*,**,* 27.00*,*01*,*A0*
*N*,*f*,*N*,*Y*,*CAN3-Z364.1.2-M84*,*Extracorporeal Circuits for Use with a Hemodialyser, Hemofilter, or Hemoconcentrator [ID# 997]*,**,* 24.00*,*01*,*A0*
*N*,*e*,*N*,*Y*,*CAN3-Z364.1.2-FM84*,*Circuits extracorporels pour hémodialyseurs, hémofiltres et hémoconcentrateurs (ps:09/87) [ID# 996]*,**,* 24.00*,*01*,*A0*
*N*,*x*,*Y*,*Y*,*Z364.2.1-M1986*,*Fluid Supply and Monitoring Systems for Hemodialysis (e:1) (rp:09/87) [ID# 2214]*,**,* 39.00*,*01*,*A0*
*N*,*f*,*N*,*Y*,*CAN3-Z364.2.2-M86*,*Water Treatment Equipment and Water Quality Requirements for Hemodialysis (rp:09/86) [ID# 999]*,**,* 27.00*,*01*,*A0*
*N*,*e*,*N*,*Y*,*CAN3-Z364.2.2-FM86*,*Exigences relatives au matériel de traitement de l'eau et à la qualité de l'eau pour l'hémodialyse [ID# 998]*,**,* 27.00*,*01*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z386-92*,*Laser Safety In Health Care Facilities [ID# 3345]*,**,* 60.00*,*01*,*A0*
*N*,*f*,*N*,*Y*,*Z441-1988*,*Terminology and Definitions Used in CSA Health Care Technology Standards [ID# 2219]*,**,* 40.00*,*01*,*A0*
*N*,*e*,*N*,*Y*,*Z441-F1988*,*Terminologie et définitions utilisées dans les normes CSA sur la technologie dessoins de santé [ID# 4164]*,**,* 40.00*,*01*,*A0*
*N*,*f*,*N*,*Y*,*CAN3-Z323.1.2-M85*,*Adaptive Automotive Control Systems for Physically Disabled Persons [ID# 973]*,**,* 24.00*,*01*,*A1*
*N*,*e*,*N*,*Y*,*CAN3-Z323.1.2-FM85*,*Aides à la conduite automobile pour les personnes handicapées [ID# 972]*,**,* 24.00*,*01*,*A1*
*N*,*x*,*N*,*Y*,*Z323.2.1-M1982 (R1993)*,*Prosthetics and Orthotics-Terminology, Definitions, and Identification [ID# 2210]*,**,* 16.00*,*01*,*A1*
*N*,*f*,*N*,*Y*,*Z323.3.1-1982 (R1993)*,*Electrical Aids for Physically Disabled Persons [ID# 2212]*,**,* 16.00*,*01*,*A1*
*N*,*e*,*N*,*Y*,*Z323.3.1-F1982 (C1993)*,*Aides électriques pour les personnes handicapées [ID# 2211]*,**,* 16.00*,*01*,*A1*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z323.4.1-86*,*Wheelchairs-Nomenclature, Terms, and Definitions [ID# 509]*,**,* 23.00*,*01*,*A1*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z323.4.1-F86*,*Fauteuils roulants : nomenclature et définitions [ID# 508]*,**,* 23.00*,*01*,*A1*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z323.4.2-M86*,*Wheelchairs--Determination of Overall Dimensions, Mass, and Turning Space [ID# 511]*,**,* 23.00*,*01*,*A1*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z323.4.2-FM86*,*Fauteuils roulants : détermination des dimensions hors tout, de la masse et du rayon de braquage [ID# 510]*,**,* 23.00*,*01*,*A1*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z323.4.3-M89*,*Wheelchairs--Determination of Static Stability (Adopted ISO 7176-1:1986) [ID# 2483]*,**,* 29.00*,*01*,*A1*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z323.4.3-FM89*,*Fauteuils roulants : détermination de la stabilité statique (norme ISO 7176-1:1986 adoptée) [ID# 2564]*,**,* 29.00*,*01*,*A1*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z323.4.4-M89*,*Wheelchairs--Determination of Brake Effectiveness (Adopted ISO 7176-3:1988) [ID# 2488]*,**,* 25.00*,*01*,*A1*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z323.4.4-FM89*,*Fauteuils roulants : détermination de l'efficacité des freins (norme ISO 7176-3:1988 adoptée) [ID# 2563]*,**,* 25.00*,*01*,*A1*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z323.4.6-M89*,*Wheelchairs--Determination of Maximum Speed, Acceleration, and Retardation of Electric Wheelchairs (Adopted ISO 7176-6:1988) [ID# 2487]*,**,* 25.00*,*01*,*A1*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z323.4.6-FM89*,*Fauteuils roulants : détermination de la vitesse, de l'accélération et du ralentissement maximaux des fauteuils roulants électriques (norme ISO 7176-6:1988 adoptée) [ID# 2562]*,**,* 25.00*,*01*,*A1*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z323.4.7-M89*,*Wheelchairs--Determination of Obstacle-Climbing Ability of Electric Wheelchairs (Adopted ISO 7176-10:1988) [ID# 2484]*,**,* 25.00*,*01*,*A1*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z323.4.7-FM89*,*Fauteuils roulants : détermination de l'aptitude des fauteuils roulants électriques à gravir les obstacles (norme ISO 7176-10:1988 adoptée) [ID# 2561]*,**,* 25.00*,*01*,*A1*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z349.1-87*,*Dental Terminology and Definitions/Dentisterie-Terminologie et définitions (Bilingual standard/norme bilingue) [ID# 513]*,**,* 50.00*,*01*,*A2*
*N*,*f*,*N*,*Y*,*CAN3-Z349.2-M79*,*Dental Burs and Cutters-Fitting Dimensions (Adopted ISO 1797:1976) [ID# 983]*,**,* 14.00*,*01*,*A2*
*N*,*e*,*N*,*Y*,*CAN3-Z349.2-FM79*,*Fraises et instruments de coupe utilisés en dentisterie-Dimensions d'ajustement (norme ISO 1797:1976 adoptée) [ID# 982]*,**,* 14.00*,*01*,*A2*
*N*,*f*,*N*,*Y*,*CAN3-Z349.9-80*,*Tooth Designation for Dental Purposes-Two-Digit System [ID# 993]*,**,* 14.00*,*01*,*A2*
*N*,*e*,*N*,*Y*,*CAN3-Z349.9-F80*,*Désignation des dents en dentisteri-code à deux chiffres [ID# 992]*,**,* 14.00*,*01*,*A2*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z349.16 TO CAN/CSA-Z349.28-M92*,*Filling, Restorative, and Prosthodontic Materials for Dentistry-Volume 1 (Adopted ISO 1559:1986, 1560:1985, 1561:1975, 1562:1984, 1564:1976, 1567:1988, 3107:1988, 3336:1977, 4049:1988, 4824:1981, 6872:1984, 6873:1983 and 7491:1985) [ID# 3193]*,**,* 72.00*,*01*,*A2*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z349.29 TO CAN/CSA-Z349.35.2-M92*,*Dental Instruments and Equipment-Volume 1 (Adopted ISO 3964:1982, 4073:1980, 6360-1:1985, 6360-2:1986, 7492:1983, 7493:1985, 7711:1984, 7787-1:1984 and 7787-2:1984) [ID# 3194]*,**,* 92.00*,*01*,*A2*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z349.36-M92*,*Photography-Intra-Oral Dental Radiographic Film-Specification (Adopted ISO 3665) [ID# 3155]*,**,* 12.00*,*01*,*A2*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z349.38-93 TO CAN/CSA-Z349.47-93*,*Filling, Restorative, and Prosthodontic Materials for Dentistry--Volume 2 [ID# 3601]*,**,* 98.00*,*01*,*A2*
*N*,*x*,*N*,*Y*,*DIR.014-1993*,*List of CSA Certified Elevator Equipment [ID# 4499]*,**,* 0.00*,*01*,*C0*
*N*,*f*,*N*,*Y*,*CAN/CSA-B44-M90*,*Safety Code for Elevators (rp:06/90, 12/92, 07/93) [ID# 2666]*,**,* 90.00*,*01*,*C0*
*N*,*e*,*N*,*Y*,*CAN/CSA-B44-FM90*,*Code de sécurité des ascenseurs et monte-charge (ps:12/92) [ID# 2842]*,**,* 90.00*,*01*,*C0*
*N*,*f*,*N*,*Y*,*CAN/CSA-B44S1-M92*,*Supplement No. 1-1992 to CAN/CSA-B44-M90, Safety Code for Elevators (rp:12/92, 07/93) [ID# 3267]*,**,* 55.00*,*01*,*C0*
*N*,*e*,*N*,*Y*,*CAN/CSA-B44S1-FM92*,*Supplément no 1-1992 à la norme CAN/CSA-B44-M90, Code de sécurité des ascenseurs et monte-charge [ID# 3583]*,**,* 55.00*,*01*,*C0*
*N*,*x*,*N*,*Y*,*CAN/CSA-B44.1-M91/ASME-A17.5-1991*,*Elevator and Escalator Electrical Equipment [ID# 3106]*,**,* 75.00*,*01*,*C0*
*N*,*f*,*N*,*Y*,*B51-M1991*,*Boiler, Pressure Vessel, and Pressure Piping Code [ID# 2889]*,**,* 53.00*,*01*,*C0*
*N*,*e*,*N*,*Y*,*B51-FM1991*,*Code des chaudières, appareils et tuyauteries sous pression [ID# 3173]*,**,* 53.00*,*01*,*C0*
*N*,*e*,*N*,*Y*,*CAN/CSA-B52-F92*,*Code de réfrigération mécanique [ID# 3582]*,**,* 53.00*,*01*,*C0*
*N*,*f*,*N*,*Y*,*B167-1964*,*General Purpose Electric Overhead Travelling Cranes (e:6) [ID# 219]*,**,* 18.00*,*01*,*C0*
*N*,*e*,*N*,*Y*,*B167-F1964*,*Ponts roulants électriques pour usage général [ID# 218]*,**,* 18.00*,*01*,*C0*
*N*,*f*,*N*,*Y*,*B311-M1979*,*Safety Code for Manlifts [ID# 283]*,**,* 27.00*,*01*,*C0*
*N*,*e*,*N*,*Y*,*B311-FM1979*,*Code de sécurité des monte-personne [ID# 282]*,**,* 27.00*,*01*,*C0*
*N*,*f*,*N*,*Y*,*B311S1-1984*,*Supplement No. 1 to B311-M1979, Safety Code for Manlifts [ID# 285]*,**,* 14.00*,*01*,*C0*
*N*,*e*,*N*,*Y*,*B311S1-F1984*,*Supplément no 1 à la norme ACNOR B311-M1979, Code de sécurité des monte-personne [ID# 284]*,**,* 14.00*,*01*,*C0*
*N*,*f*,*N*,*Y*,*CAN3-B354.1-M82*,*Elevating Rolling Work Platforms [ID# 631]*,**,* 23.00*,*01*,*C0*
*N*,*e*,*N*,*Y*,*CAN3-B354.1-FM82*,*Plates-formes de travail élévatrices mobiles [ID# 630]*,**,* 23.00*,*01*,*C0*
*N*,*f*,*N*,*Y*,*CAN3-B354.2-M82*,*Self-Propelled Elevating Work Platforms for Use on Paved/Slab Surfaces [ID# 633]*,**,* 27.00*,*01*,*C0*
*N*,*e*,*N*,*Y*,*CAN3-B354.2-FM82*,*Plates-formes de travail élévatrices automotrices pour utilisation sur les surfaces asphaltées ou constituées de dalles [ID# 632]*,**,* 27.00*,*01*,*C0*
*N*,*f*,*N*,*Y*,*CAN3-B354.3-M82*,*Self-Propelled Elevating Work Platforms for Use as "Off-Slab" Units [ID# 635]*,**,* 27.00*,*01*,*C0*
*N*,*e*,*N*,*Y*,*CAN3-B354.3-FM82*,*Plates-formes de travail élévatrices automotrices pour utilisation sur des surfaces non compactées [ID# 634]*,**,* 27.00*,*01*,*C0*
*N*,*f*,*N*,*Y*,*CAN3-B354.4-M82*,*Boom-Type Elevating Work Platforms [ID# 637]*,**,* 27.00*,*01*,*C0*
*N*,*e*,*N*,*Y*,*CAN3-B354.4-FM82*,*Plates-formes de travail élévatrices à mât articulé [ID# 636]*,**,* 27.00*,*01*,*C0*
*Y*,*x*,*N*,*Y*,*CAN/CSA-B355-93*,*Lifts for Persons with Physical Disabilities [ID# 3434]*,**,* 51.00*,*01*,*C0*
*N*,*f*,*N*,*Y*,*CAN/CSA-B613-M87*,*Elevating Devices for the Handicapped in Private Residences [ID# 408]*,**,* 26.00*,*01*,*C0*
*N*,*e*,*N*,*Y*,*CAN/CSA-B613-FM87*,*Ascenseurs et monte-escalier d'habitations pour personnes handicapées [ID# 2338]*,**,* 26.00*,*01*,*C0*
*N*,*e*,*N*,*Y*,*CAN/CSA-C225-FM88*,*Engins élévateurs à nacelle portés sur véhicule [ID# 2739]*,**,* 38.00*,*01*,*C0*
*N*,*f*,*N*,*Y*,*CAN/CSA-D409-92*,*Motor Vehicles for the Transportation of Persons with Physical Disabilities (rp:01/93) [ID# 3433]*,**,* 49.00*,*01*,*C0*
*N*,*e*,*N*,*Y*,*CAN/CSA-D409-F92*,*Véhicules automobiles pour le transport des personnes handicapées [ID# 3587]*,**,* 49.00*,*01*,*C0*
*N*,*x*,*N*,*Y*,*Z150-1974*,*Safety Code for Mobile Cranes [ID# 2026]*,**,* 21.00*,*01*,*C0*
*N*,*x*,*N*,*Y*,*Z150S1-1977*,*Supplement No. 1-1977 to CSA Standard Z150-1974, Safety Code for Mobile Cranes [ID# 2027]*,**,* 14.00*,*01*,*C0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z185-M87*,*Safety Code for Personnel Hoists [ID# 478]*,**,* 41.00*,*01*,*C0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z185-FM87*,*Règles de sécurité pour les monte-charge provisoires [ID# 2340]*,**,* 41.00*,*01*,*C0*
*N*,*x*,*N*,*Y*,*Z248-1975*,*Code for Tower Cranes (e:1) [ID# 2150]*,**,* 18.00*,*01*,*C0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z256-M87*,*Safety Code for Material Hoists [ID# 498]*,**,* 41.00*,*01*,*C0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z256-FM87*,*Règles de sécurité pour les monte-matériaux [ID# 2341]*,**,* 41.00*,*01*,*C0*
*N*,*f*,*N*,*Y*,*Z267-M1983*,*Safety Code for Amusement Rides [ID# 2169]*,**,* 28.00*,*01*,*C0*
*N*,*e*,*N*,*Y*,*Z267-FM1983*,*Code de sécurité concernant les manèges [ID# 2168]*,**,* 28.00*,*01*,*C0*
*N*,*f*,*N*,*Y*,*CAN3-Z271-M84*,*Safety Code for Suspended Powered Platforms [ID# 919]*,**,* 34.00*,*01*,*C0*
*N*,*e*,*N*,*Y*,*CAN3-Z271-FM84*,*Règles de sécurité pour les plates-formes suspendues mécaniques [ID# 918]*,**,* 34.00*,*01*,*C0*
*N*,*e*,*N*,*Y*,*CAN/CSA-M421-F93*,*Utilisation de l'électricité dans les mines (Includes Errata No. 1 Dated August 1993) (e:1) [ID# 4468]*,**,* 68.00*,*01*,*D0*
*N*,*f*,*N*,*Y*,*CAN/CSA-M421-93*,*Use of Electricity in Mines [ID# 3600]*,**,* 68.00*,*01*,*D0*
*N*,*f*,*N*,*Y*,*CAN/CSA-M422-M87*,*Fire-Performance and Antistatic Requirements for Conveyor Belting [ID# 435]*,**,* 40.00*,*01*,*D0*
*N*,*e*,*N*,*Y*,*CAN/CSA-M422-FM87*,*Exigences relatives à la tenue au feu et aux propriétés antistatiques des courroies transporteuses [ID# 2692]*,**,* 40.00*,*01*,*D0*
*N*,*f*,*N*,*Y*,*CAN/CSA-M424.1-88*,*Flameproof Non-Rail-Bound Diesel-Powered Machines for Use in Gassy Underground Coal Mines [ID# 437]*,**,* 49.00*,*01*,*D0*
*N*,*e*,*N*,*Y*,*CAN/CSA-M424.1-F88*,*Engins antidéflagrants hors-rails à moteur diesel pour utilisation dans les mines souterraines grisouteuses [ID# 2694]*,**,* 49.00*,*01*,*D0*
*N*,*f*,*N*,*Y*,*CAN/CSA-M424.2-M90*,*Non-Rail-Bound Diesel-Powered Machines for Use in Non-Gassy Underground Mines [ID# 2778]*,**,* 32.00*,*01*,*D0*
*N*,*e*,*N*,*Y*,*CAN/CSA-M424.2-FM90*,*Engins automoteurs hors-rails à moteur diesel pour utilisation dans des mines souterraines non grisouteuses [ID# 3052]*,**,* 32.00*,*01*,*D0*
*N*,*e*,*N*,*Y*,*CAN/CSA-M424.3-FM90*,*Véhicules automoteurs à pneumatiques pour mines souterraines : freinage [ID# 3053]*,**,* 36.00*,*01*,*D0*
*N*,*f*,*N*,*Y*,*CAN/CSA-M427-M91*,*Fire-Performance and Antistatic Requirements for Ventilation Materials [ID# 2822]*,**,* 29.00*,*01*,*D0*
*N*,*e*,*N*,*Y*,*CAN/CSA-M427-FM91*,*Matériaux pour conduits d'aérage des mines : caractéristiques antistatiques et de tenue au feu [ID# 3042]*,**,* 29.00*,*01*,*D0*
*N*,*f*,*N*,*Y*,*CAN/CSA-M430-90*,*Roof and Rock Bolts, and Accessories [ID# 2720]*,**,* 54.00*,*01*,*D0*
*N*,*e*,*N*,*Y*,*CAN/CSA-M430-F90*,*Organes d'ancrage et accessoires pour parois rocheuses [ID# 3203]*,**,* 54.00*,*01*,*D0*
*N*,*x*,*N*,*Y*,*ANSI/ASTM C384-1985*,*Impedance and Absorption of Acoustical Materials by the Impedance Tube Method [ID# 20]*,**,* 0.00*,*01*,*D0*
*N*,*x*,*N*,*Y*,*ANSI/ASTM C423-1984*,*Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method [ID# 22]*,**,* 0.00*,*01*,*D0*
*N*,*x*,*N*,*Y*,*ANSI/ASTM E90-1985*,*Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions [ID# 32]*,**,* 0.00*,*01*,*D0*
*N*,*x*,*N*,*Y*,*ANSI/ASTM E336-1984*,*Measurement of Airborne Sound Insulation in Buildings [ID# 25]*,**,* 0.00*,*01*,*D0*
*N*,*x*,*N*,*Y*,*ANSI/ASTM E492-1977*,*Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine [ID# 26]*,**,* 0.00*,*01*,*D0*
*N*,*x*,*N*,*Y*,*ANSI/ASTM E497-1981*,*Installation of Fixed Partitions of Light Frame Type for the Purpose of Conserving their Sound Insulation Efficiency [ID# 27]*,**,* 0.00*,*01*,*D0*
*N*,*x*,*N*,*Y*,*ANSI/ASTM E557-1981*,*Architectural Application and Installation of Operable Partitions [ID# 28]*,**,* 0.00*,*01*,*D0*
*N*,*x*,*N*,*Y*,*ANSI/ASTM E596-1986*,*Laboratory Measurement of the Noise Reduction of Sound-Isolating Enclosures [ID# 29]*,**,* 0.00*,*01*,*D0*
*N*,*x*,*N*,*Y*,*ANSI/ASTM E597-1981*,*Determining a Single-number Rating of Airborne Sound Isolation for Use in Multiunit Building Specifications [ID# 30]*,**,* 0.00*,*01*,*D0*
*N*,*x*,*N*,*Y*,*ANSI/ASTM E795-1983*,*Mounting Test Specimens during Sound Absorption Tests [ID# 31]*,**,* 0.00*,*01*,*D0*
*N*,*x*,*N*,*Y*,*ANSI/ASTM E966-1984*,*Field Measurement of Airborne Sound Insulation of Building Facades and Facade Elements [ID# 33]*,**,* 0.00*,*01*,*D0*
*N*,*x*,*N*,*Y*,*ANSI/ASTM E989-1984*,*Determination of Impact Insulation Class (11C) [ID# 34]*,**,* 0.00*,*01*,*D0*
*N*,*x*,*N*,*Y*,*ANSI/ASTM E1007-1984*,*Field Measurement of Tapping Machine Impact Sound Transmission through Floor-Ceiling Assemblies and Associated Support Structures [ID# 23]*,**,* 0.00*,*01*,*D0*
*N*,*x*,*N*,*Y*,*SAE J1096-1985*,*Measurement of Exterior Sound Levels for Heavy Trucks Under Stationary Conditions [ID# 2923]*,**,* 0.00*,*01*,*D0*
*N*,*x*,*N*,*Y*,*Z107.0-1984*,*Definitions of Common Acoustical Terms Used in CSA Standards [ID# 2003]*,**,* 18.00*,*01*,*E0*
*N*,*f*,*N*,*Y*,*CAN3-Z107.4-M86*,*Pure Tone Air Conduction Audiometers for Hearing Conservation and for Screening [ID# 858]*,**,* 25.00*,*01*,*E0*
*N*,*e*,*N*,*Y*,*CAN3-Z107.4-FM86*,*Audiomètres tonals à conduction aérienne pour la préservation de l'ouïe et pour le dépistage [ID# 857]*,**,* 25.00*,*01*,*E0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z107.6-M90*,*Pure Tone Air Conduction Threshold Audiometry for Hearing Conservation [ID# 2627]*,**,* 42.00*,*01*,*E0*
*N*,*x*,*N*,*Y*,*Z107.21-M1977 (R1993)*,*Procedure for Measurement of the Maximum Exterior Sound Level of Pleasure Motorboats [ID# 2008]*,**,* 17.00*,*01*,*E0*
*N*,*x*,*N*,*Y*,*Z107.25-M1983*,*Procedure for Measurement of the Exhaust Sound Level of Stationary Motorcycles (rp:11/83) [ID# 2011]*,**,* 18.00*,*01*,*E0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z107.31-M86*,*Test Procedures for the Measurement of Sound Levels from Agricultural Machines [ID# 464]*,**,* 34.00*,*01*,*E0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z107.31-FM86*,*Méthodes d'essai pour le mesurage des niveaux de bruit émis par les machines agricoles [ID# 463]*,**,* 34.00*,*01*,*E0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z107.32-M86*,*Test Procedure for the Measurement of Sound Emitted from Construction, Forestry, and Mining Machines to the Operator Station and Exterior of the Machine (rp:02/87) [ID# 466]*,**,* 34.00*,*01*,*E0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z107.32-FM86*,*Méthodes d'essai pour le mesurage du bruit émis par les engins de construction, forestiers et miniers, au poste de l'opérateur et à l'extérieur de la machine [ID# 465]*,**,* 34.00*,*01*,*E0*
*N*,*x*,*N*,*Y*,*Z107.51-M1980 (R1985) (R1993)*,*Procedure for In-Situ Measurement of Noise from Industrial Equipment [ID# 2015]*,**,* 17.00*,*01*,*E0*
*N*,*x*,*N*,*Y*,*Z107.52-M1983 (R1994)*,*Recommended Practice for the Prediction of Sound Pressure Levels in Large Rooms Containing Sound Sources [ID# 2016]*,**,* 24.00*,*01*,*E0*
*N*,*x*,*N*,*Y*,*Z107.53-M1982 (R1994)*,*Procedure for Performing a Survey of Sound Due to Industrial, Institutional, or Commercial Activities [ID# 2017]*,**,* 16.00*,*01*,*E0*
*N*,*f*,*N*,*Y*,*CAN3-Z107.54-M85 (R1993)*,*Procedure for Measurement of Sound and Vibration Due to Blasting Operations [ID# 860]*,**,* 26.00*,*01*,*E0*
*N*,*e*,*N*,*Y*,*CAN3-Z107.54-FM85 (C1993)*,*Méthode de mesure du niveau sonore et des vibrations émanant des opérations de dynamitage [ID# 859]*,**,* 26.00*,*01*,*E0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z107.55-M86*,*Recommended Practice for the Prediction of Sound Levels Received at a Distance from an Industrial Plant [ID# 469]*,**,* 29.00*,*01*,*E0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z107.55-FM86*,*Pratique recommandée pour la prévision des niveaux sonores reçus à une distance donnée d'une usine [ID# 468]*,**,* 29.00*,*01*,*E0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z107.56-M86*,*Procedures for the Measurement of Occupational Noise Exposure [ID# 471]*,**,* 38.00*,*01*,*E0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z107.56-FM86*,*Méthode de mesure de l'exposition au bruit en milieu de travail [ID# 470]*,**,* 38.00*,*01*,*E0*
*N*,*x*,*N*,*Y*,*Z107.71-M1981*,*Measurement and Rating of the Noise Output of Consumer Appliances [ID# 2018]*,**,* 27.00*,*01*,*E0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z143-86*,*Common Names for Pest Control Chemicals/Nom communs pour les pesticides (Bilingual standard/norme bilingue) [ID# 473]*,**,* 45.00*,*01*,*E0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z143S1-88*,*Supplement No. 1 to CAN/CSA-Z143-86, Common Names for Pest Control Chemicals/ Supplément no 1 à la norme ACNOR CAN/CSA-Z143-86, Noms communs pour les pesticides (Bilingual standard/norme bilingue) (a:1) (e:1) [ID# 475]*,**,* 41.00*,*01*,*E0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z143S2-90*,*Supplement No. 2 to CAN/CSA-Z143-86, Common Names for Pest Control Chemicals/ Supplément no 2 à la norme CAN/CSA-Z143-86, Noms communs pour les pesticides (Bilingual standard/norme bilingue) [ID# 2708]*,**,* 30.00*,*01*,*E0*
*N*,*x*,*N*,*Y*,*Z201-M1990*,*Qualification Code for Ontario for Laboratories Analyzing Industrial Waste [ID# 2630]*,**,* 88.00*,*01*,*E0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z217.1-M92/Z217.2-M92*,*Standard Practice for Dilute-Solution Viscosity of Photodegradable Polystyrene/ Test Method for Tumbling Friability of Degradable Polystyrene Foams [ID# 3111]*,**,* 35.00*,*01*,*E0*
*N*,*x*,*N*,*Y*,*Z218.0-93*,*Test Method for Determining the Anaerobic Biodegradability of Plastic Materials [ID# 3428]*,**,* 30.00*,*01*,*E0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z218.1-M92*,*Standard Practice for Exposing Plastics to a Simulated Soil Environment [ID# 3259]*,**,* 25.00*,*01*,*E0*
*N*,*x*,*N*,*Y*,*Z223.1-M1977*,*Method for the Determination of Particulate Mass Flows in Enclosed Gas Streams [ID# 2049]*,**,* 23.00*,*01*,*E0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z223.2-M86*,*Method for the Continuous Measurement of Oxygen, Carbon Dioxide, Carbon Monoxide, Sulphur Dioxide, and Oxides of Nitrogen in Enclosed Combustion Flue Gas Streams [ID# 480]*,**,* 38.00*,*01*,*E0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z223.2-FM86*,*Méthode de dosage en continu des concentrations d'oxygène, de dioxyde de carbone, de monoxyde de carbone, de dioxyde de soufre et d'oxydes d'azote dans les courants de gaz de combustion dans le système d'évacuation [ID# 2489]*,**,* 38.00*,*01*,*E0*
*N*,*x*,*N*,*Y*,*Z223.21-M1978*,*Method for the Determination of Carbon Monoxide [ID# 2050]*,**,* 16.00*,*01*,*E0*
*N*,*x*,*N*,*Y*,*Z223.22-M1980*,*Method for the Measurement of Sulphur Dioxide in Air [ID# 2051]*,**,* 23.00*,*01*,*E0*
*N*,*x*,*N*,*Y*,*Z223.23-M1981*,*Method for the Measurement of Ozone in Air [ID# 2052]*,**,* 23.00*,*01*,*E0*
*N*,*x*,*N*,*Y*,*Z223.24-M1983*,*Method for the Measurement of Nitric Oxide and Nitrogen Dioxide in Air [ID# 2053]*,**,* 25.00*,*01*,*E0*
*N*,*f*,*N*,*Y*,*CAN3-Z223.25-M86*,*Method for the Measurement of Vinyl Chloride in Air [ID# 887]*,**,* 38.00*,*01*,*E0*
*N*,*e*,*N*,*Y*,*CAN3-Z223.25-FM86*,*Méthode de dosage du chlorure de vinyle dans l'air [ID# 886]*,**,* 38.00*,*01*,*E0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z223.26-M87*,*Measurement of Total Mercury in Air--Cold Vapour Atomic Absorption Spectrophotometric Method [ID# 481]*,**,* 38.00*,*01*,*E0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z223.26-FM87*,*Dosage du mercure total dans l'air par spectrophotométrie d'absorption atomique en vapeur froide [ID# 2268]*,**,* 38.00*,*01*,*E0*
*N*,*f*,*N*,*Y*,*Z751-94*,*Guidelines for Environmental Auditing: Statement of Principles and General Practices [ID# 4454]*,**,* 31.00*,*01*,*E0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z751-F93*,*Guide de vérification environnementale: principes et pratiques générales [ID# 4482]*,**,* 0.00*,*01*,*E0*
*N*,*x*,*N*,*Y*,*Z760.2-93*,*Environmental Life Cycle Assessment--Part II, Life Cycle Assessment [ID# 4466]*,**,* 92.00*,*01*,*E0*
*N*,*x*,*N*,*Y*,*Z761-93*,*Guideline on Environmental Labelling [ID# 4453]*,**,* 59.00*,*01*,*E0*
*N*,*x*,*N*,*N*,*DIR.009-1993*,*1993 List of Certified Occupational Health and Safety Products [ID# 3641]*,**,* 0.00*,*01*,*F0*
*N*,*f*,*N*,*Y*,*B352-M1980*,*Rollover Protective Structures (ROPS) for Agricultural, Construction, Earthmoving, Forestry, Industrial, and Mining Machines [ID# 321]*,**,* 27.00*,*01*,*F0*
*N*,*e*,*N*,*Y*,*B352-FM1980*,*Structures de protection contre le retournement (SPR) pour engins agricoles, de construction, de terrassement, forestiers, industriels et miniers [ID# 3016]*,**,* 27.00*,*01*,*F0*
*N*,*f*,*N*,*Y*,*CAN/CSA-M663-92*,*Seven-Pin Electrical Connector and Cable for Agricultural Towing/Towed Equipment [ID# 3330]*,**,* 16.00*,*01*,*F0*
*N*,*e*,*N*,*Y*,*CAN/CSA-M663-F92*,*Connecteurs et câbles électriques à sept pôles pour le matériel agricole tracteur et tracté (ps:Adaptation de la norme SAE J560B) [ID# 3500]*,**,* 16.00*,*01*,*F0*
*N*,*f*,*N*,*Y*,*CAN/CSA-M2860-M91*,*Minimum Access Dimensions for Servicing Machines (EMM,FM)(Adopted ISO 2860:1983) [ID# 3026]*,**,* 13.00*,*01*,*F0*
*N*,*e*,*N*,*Y*,*CAN/CSA-M2860-FM91*,*Dimensions minimales des passages - Engins de terrassement et forestiers (norme ISO 2860:1983 adoptée) [ID# 3598]*,**,* 13.00*,*01*,*F0*
*N*,*x*,*N*,*Y*,*CAN/CSA-M2867-93*,*Access Systems--Machinery (EMM, FM) (Adopted ISO 2867:1989) [ID# 3472]*,**,* 20.00*,*01*,*F0*
*N*,*f*,*N*,*Y*,*CAN/CSA-M3411-M91*,*Human Physical Dimensions of Operators--Minimum Operator Space Envelope--Machinery (EMM, AM, FM) (Adopted ISO 3411:1982) [ID# 3027]*,**,* 23.00*,*01*,*F0*
*N*,*e*,*N*,*Y*,*CAN/CSA-M3411-FM91*,*Dimensions ergonomiques des conducteurs -- Espace enveloppe minimal -- Engins agricoles, forestiers et de terrassement (norme ISO 3411-1982 adaptée) [ID# 3591]*,**,* 23.00*,*01*,*F0*
*N*,*f*,*N*,*Y*,*CAN/CSA-M3450-M92*,*Braking Systems--Performance Requirements and Test Procedures--Wheeled Machines (Adopted ISO 3450:1985) [ID# 3312]*,**,* 12.00*,*01*,*F0*
*N*,*e*,*N*,*Y*,*CAN/CSA-M3450-FM92*,*Systèmes de freinage--Exigences de performance et procédures d'essai--Engins sur roues (Norme ISO 3450:1985 adoptêe) [ID# 3501]*,**,* 12.00*,*01*,*F0*
*N*,*f*,*N*,*Y*,*CAN/CSA-M3789.4-91*,*Controls for Forestry Log Loaders-System A (Adopted ISO 3789-4:1989) [ID# 3028]*,**,* 19.00*,*01*,*F0*
*N*,*e*,*N*,*Y*,*CAN/CSA-M3789.4-F91*,*Commandes pour chargeurs de grumes forestiers--Système A (norme ISO 3789-4:1989 adoptée) [ID# 3398]*,**,* 19.00*,*01*,*F0*
*N*,*f*,*N*,*Y*,*CAN/CSA-M4254.4-M92*,*Machinery for Forestry -- Winches -- Technical Means for Ensuring Safety (Adopted ISO 4254-4:1990) [ID# 3237]*,**,* 15.00*,*01*,*F0*
*N*,*e*,*N*,*Y*,*CAN/CSA-M4254.4-FM92*,*Matériels forestiers--Treuils--Dispositifs techniques permettant d'assurer la sécurité (norme ISO 4254-4:1990 adoptée) [ID# 3502]*,**,* 15.00*,*01*,*F0*
*N*,*x*,*N*,*Y*,*CAN/CSA-M5007-93*,*Agricultural Wheeled Tractors -- Operator's Seat -- Laboratory Measurement of Transmitted Vibration (Adopted ISO 5007:1990) [ID# 3473]*,**,* 25.00*,*01*,*F0*
*N*,*f*,*N*,*Y*,*CAN/CSA-M5353-M90*,*Seat Index Point (SIP)--Mobile Machines (EMM, AM, FM, MM) (Adopted ISO 5353:1978) [ID# 2827]*,**,* 26.00*,*01*,*F0*
*N*,*e*,*N*,*Y*,*CAN/CSA-M5353-FM90*,*Point repère du siège (SIP)--Engins de terrassement et tracteurs et matériels agricoles et forestiers (norme ISO 5353:1978 adoptée) [ID# 3627]*,**,* 26.00*,*01*,*F0*
*N*,*f*,*N*,*Y*,*CAN/CSA-M5675-92*,*Agricultural Tractors and Machinery--General Purpose Quick-Action Hydraulic Couplers (Adopted ISO 5675:1992) [ID# 3432]*,**,* 20.00*,*01*,*F0*
*N*,*e*,*N*,*Y*,*CAN/CSA-M5675-F92*,*Tracteurs et matériels agricoles--Coupleurs hydrauliques à usage général (norme ISO 5675:1992 adoptée) [ID# 4510]*,**,* 20.00*,*01*,*F0*
*N*,*f*,*N*,*Y*,*CAN/CSA-M6405-91*,*Symbols--Operator Controls and Others--Machinery (EMM, FM) (Adopted ISO 6405:1982) [ID# 3029]*,**,* 28.00*,*01*,*F0*
*N*,*e*,*N*,*Y*,*CAN/CSA-M6405-F91*,*Symboles--Commandes et autres--Engins forestiers et de terrassement (norme ISO 6405:1982 adoptée) [ID# 3503]*,**,* 28.00*,*01*,*F0*
*N*,*f*,*N*,*Y*,*CAN/CSA-M6682-M91*,*Zones of Comfort and Reach for Controls--Machinery (EMM, FM) (Adopted ISO 6682:1986) [ID# 3046]*,**,* 26.00*,*01*,*F0*
*N*,*e*,*N*,*Y*,*CAN/CSA-M6682-FM91*,*Zones de confort et d'accessibilité des commandes--Engins forestiers et de terrassement (norme ISO 6682:1986 adoptée) [ID# 3504]*,**,* 26.00*,*01*,*F0*
*N*,*f*,*N*,*Y*,*CAN/CSA-M6683-92*,*Seat Belts and Anchorages -- Machinery (EMM, FM) (Adopted ISO 6683:1981) [ID# 3368]*,**,* 23.00*,*01*,*F0*
*N*,*e*,*N*,*Y*,*CAN/CSA-M6683-F92*,*Ceintures de sécurité et ancrages--Engins forestiers et de terrassement (norme ISO 6683:1981 adoptée) [ID# 3505]*,**,* 23.00*,*01*,*F0*
*N*,*f*,*N*,*Y*,*CAN/CSA-M6687-M92*,*Machinery for Forestry--Winches--Performance Requirements (Adopted ISO 6687:1982) [ID# 3235]*,**,* 15.00*,*01*,*F0*
*N*,*e*,*N*,*Y*,*CAN/CSA-M6687-FM92*,*Matériel forestier--Treuils--Exigences de performance (norme ISO 6687:1982 adoptée) [ID# 3506]*,**,* 15.00*,*01*,*F0*
*N*,*f*,*N*,*Y*,*CAN/CSA-M6816-92*,*Machinery for Forestry -- Winches -- Classification and Nomenclature (Adopted ISO 6816:1984) [ID# 3236]*,**,* 18.00*,*01*,*F0*
*N*,*e*,*N*,*Y*,*CAN/CSA-M6816-F92*,*Matériel forestier--Treuils--Classification et nomenclature (norme ISO 6816:1984 adoptée) [ID# 3507]*,**,* 18.00*,*01*,*F0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z195-FM92*,*Chaussures de protection [ID# 3393]*,**,* 35.00*,*01*,*F0*
*Y*,*f*,*N*,*Y*,*Z259.1-1976*,*Fall-Arresting Safety Belts and Lanyards for the Construction and Mining Industries (a:9) (rp:07/93) [ID# 2154]*,**,* 15.00*,*01*,*F0*
*Y*,*e*,*N*,*Y*,*Z259.1-F1976*,*Ceintures de sécurité et cordons d'assujettissement antichute pour les industries de la construction et des mines [ID# 2153]*,**,* 15.00*,*01*,*F0*
*Y*,*f*,*N*,*Y*,*Z259.2-M1979*,*Fall-Arresting Devices, Personnel Lowering Devices, and Life Lines (rp:07/93) [ID# 2156]*,**,* 15.00*,*01*,*F0*
*Y*,*e*,*N*,*Y*,*Z259.2-FM1979*,*Dispositifs antichutes, descendeurs et cordes d'assurance [ID# 2155]*,**,* 15.00*,*01*,*F0*
*Y*,*f*,*N*,*Y*,*Z259.3-M1978*,*Lineman's Body Belt and Lineman's Safety Strap (a:2) [ID# 2158]*,**,* 15.00*,*01*,*F0*
*Y*,*e*,*N*,*Y*,*Z259.3-FM1978*,*Ceintures et courroies de sécurité de monteurs de lignes [ID# 2157]*,**,* 15.00*,*01*,*F0*
*N*,*f*,*N*,*Y*,*Z259.4-M1979*,*Rubber Insulating Gloves and Mitts (e:2) [ID# 2160]*,**,* 14.00*,*01*,*F0*
*N*,*e*,*N*,*Y*,*Z259.4-FM1979*,*Gants et moufles isolants en caoutchouc [ID# 2159]*,**,* 14.00*,*01*,*F0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z275.2-92*,*Occupational Safety Code for Diving Operations [ID# 3313]*,**,* 49.00*,*01*,*F0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z275.2-F92*,*Règles de sécurité pour les travailleurs en plongée [ID# 3513]*,**,* 49.00*,*01*,*F0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z275.3-M86 (R1992)*,*Occupational Safety Code for Construction Work in Compressed Air [ID# 499]*,**,* 50.00*,*01*,*F0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z275.3-FM86 (C1992)*,*Règles de sécurité du travail de construction en atmosphère d'air comprimé [ID# 2322]*,**,* 50.00*,*01*,*F0*
*N*,*f*,*N*,*Y*,*CAN3-Z321-77*,*Signs and Symbols for the Occupational Environment (e:1) [ID# 971]*,**,* 17.00*,*01*,*F0*
*N*,*e*,*N*,*Y*,*CAN3-Z321-F77*,*Signaux et symboles dans le milieu de travail [ID# 970]*,**,* 17.00*,*01*,*F0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z412-FM89*,*L'ergonomie au bureau [ID# 2862]*,**,* 115.00*,*01*,*F0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z431-M89*,*Colours of Indicator Lights and Push-Buttons/Couleurs des voyants lumineux de signalisation et des boutons-poussoirs (Adopted IEC 73:1984 adoptée) (Bilingual standard/norme bilingue) [ID# 2635]*,**,* 44.00*,*01*,*F0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z433-M92*,*Portable Gas Monitors [ID# 3270]*,**,* 30.00*,*01*,*F0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-Z611-M86*,*Police Riot Helmets and Faceshield Protection [ID# 514]*,**,* 34.00*,*01*,*F0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-Z611-FM86*,*Casques et visières de protection anti-émeute pour la police [ID# 2342]*,**,* 34.00*,*01*,*F0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z615-87*,*Code for Hot Forging Producers, Health and Safety Requirements [ID# 515]*,**,* 40.00*,*01*,*F0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z615-F87*,*Règles de sécurité et d'hygiène applicables à l'industrie du forgeage à chaud [ID# 2440]*,**,* 40.00*,*01*,*F0*
*N*,*x*,*N*,*Y*,*CDROM-2201-94*,*Canadian Electrical Code, Part 1, Safety Standard for Electrical Installations (Consists of: CE Code Handbook--What's New in 1994--Ontario Provincial Amendments) [ID# 4573]*,**,* 295.00*,*02*,*A0*
*N*,*x*,*N*,*N*,*DISK3.5-2201-94-NET1*,*Canadian Electrical Code on Diskette 3.5 - Network Version 1 [ID# 4598]*,**,* 225.00*,*02*,*A0*
*N*,*x*,*N*,*N*,*CDROM-2201-1990*,*Canadian Electricial Code, Part 1, Safety Standard for Electricial Installations(Consists of : CE Code Handbook - What's New in 1990 - Ontario Provincial Amendments) [ID# 3536]*,**,* 295.00*,*02*,*A0*
*N*,*x*,*N*,*N*,*CDROM-2201-1990-NET2*,*Canadian Electrical Code, Part 1, Safety Standard for Electrical Installations (Consists of: CE Code Handbook - What's New in 1990 - Ontario Provincial Amendments) [ID# 4000]*,**,* 1100.00*,*02*,*A0*
*N*,*x*,*N*,*Y*,*CDROM-2201-1990-NET1*,*Canadian Electrical Code, Part 1, Safety Standard for Electrical Installations (Consists of: CE Code Handbook - What's New in 1990 - Ontario Provincial Amendments) Network 1 [ID# 3999]*,**,* 375.00*,*02*,*A0*
*N*,*x*,*N*,*N*,*DISK5.25-2201-1990-NET1*,*Canadian Electrical Code on Diskette 5.25 Network Version 1 [ID# 3558]*,**,* 225.00*,*02*,*A0*
*N*,*x*,*N*,*N*,*DISK5.25-2201-1990-NET2*,*Canadian Electrical Code on Diskette 5.25 - Network Version 2 [ID# 3595]*,**,* 600.00*,*02*,*A0*
*N*,*x*,*N*,*Y*,*DISK3.5-2201-94*,*Canadian Electrical Code (17th Edition) on Diskette (3.5 inch Version) [ID# 4571]*,**,* 170.00*,*02*,*A0*
*N*,*x*,*N*,*N*,*DISK3.5-2201-94-NET2*,*Canadian Electrical Code on Diskette 3.5 - Network Version 2 [ID# 4597]*,**,* 600.00*,*02*,*A0*
*N*,*x*,*N*,*Y*,*DISK5.25-2201-94*,*Canadian Electrical Code (17th Edition) on Diskette (5.25 inch Version) [ID# 4572]*,**,* 170.00*,*02*,*A0*
*N*,*x*,*N*,*N*,*DISK5.25-2201-1990*,*Canadian Electrical Code on Diskette (5.25 inch version) [ID# 3590]*,**,* 170.00*,*02*,*A0*
*N*,*f*,*N*,*N*,*PKG.2200-94*,*Electrical Code Package (Consists of: C22.1-94, The Canadian Electrical Code Part I (softbound version) and C22.1EP-94, What's New in 1994) [ID# 4488]*,**,* 51.00*,*02*,*A0*
*N*,*e*,*N*,*N*,*PKG.2205-94*,*Paquet Code de l'électricité (comprend C22.1-F94, Code canadien de l'électricité, Première partie (16e édition) et C22.1EP-F94, Quoi de neuf en 1990) [ID# 4489]*,**,* 51.00*,*02*,*A0*
*N*,*x*,*N*,*N*,*PLUS 2203 HAZLOC*,*Hazardous Locations: A Guide for the Design, Construction, and Installation of Electrical Equipment [ID# 1935]*,**,* 40.00*,*02*,*A0*
*N*,*x*,*N*,*N*,*PLUS 2204-93*,*Electrical Plus: A Guide to CSA Electrical and Electronic Standards (Second Edition) [ID# 4172]*,**,* 85.00*,*02*,*A0*
*N*,*f*,*N*,*Y*,*C22.1-94*,*Canadian Electrical Code, Part I (17th Edition), Safety Standard for Electrical Installations [ID# 4284]*,**,* 48.00*,*02*,*A0*
*N*,*e*,*N*,*Y*,*C22.1-F94*,*Code canadien de l'électricité, Première partie (17e édition), Norme de sécurité relative aux installations électriques [ID# 4485]*,**,* 48.00*,*02*,*A0*
*N*,*f*,*N*,*Y*,*C22.1EP-94*,*What's New in 1994: Changes to CE Code, Part I, Explained [ID# 4486]*,**,* 12.00*,*02*,*A0*
*N*,*e*,*N*,*Y*,*C22.1EP-F94*,*Quoi de neuf en 1994 ?, Guide explicatif des modifications au CCE, Première partie [ID# 4487]*,**,* 12.00*,*02*,*A0*
*N*,*x*,*N*,*Y*,*C22.1HB-94*,*The 1994 CE Code Handbook [ID# 4490]*,**,* 88.00*,*02*,*A0*
*N*,*e*,*N*,*Y*,*C22.1HB-F1990*,*Guide explicatif du CCE 1990 [ID# 3532]*,**,* 85.00*,*02*,*A0*
*N*,*x*,*N*,*Y*,*C22.1LL-94*,*Canadian Electrical Code, Part I--Looseleaf with Binder (English Only) [ID# 4491]*,**,* 58.00*,*02*,*A0*
*Y*,*x*,*N*,*Y*,*C22.1SB-94*,*Canadian Electrical Code, Part I (17th Edition), Safety Standard for Electrical Installations (Spiral Bound Edition) [ID# 4594]*,**,* 48.00*,*02*,*A0*
*N*,*f*,*N*,*Y*,*C22.10-1992*,*Québec Electrical Code--Canadian Electrical Code, Part I (16th Edition) plus Québec Amendments [ID# 3250]*,**,* 42.00*,*02*,*A0*
*N*,*e*,*N*,*Y*,*C22.10-F1992*,*Code de l'électricité du Québec--Code canadien de l'électricité, Première partie (16e édition) et modifications du Québec [ID# 3249]*,**,* 42.00*,*02*,*A0*
*Y*,*x*,*N*,*Y*,*SPE-1000-94*,* Model Code for the Field Evaluation of Electrical Equipment [ID# 4286]*,**,* 71.00*,*02*,*A0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-C22.2 NO. 0-M91*,*General Requirements--Canadian Electrical Code, Part II [ID# 3039]*,**,* 40.00*,*02*,*B0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-C22.2 NO. 0-FM91*,*Exigences générales--Code canadien de l'électricité, Deuxième partie [ID# 3332]*,**,* 40.00*,*02*,*B0*
*Y*,*x*,*N*,*Y*,*C22.2 NO. 0.1-M1985*,*General Requirements for Double-Insulated Equipment [ID# 1058]*,**,* 47.00*,*02*,*B0*
*Y*,*f*,*N*,*Y*,*C22.2 NO. 0.4-M1982 (R1993)*,*Bonding and Grounding of Electrical Equipment (Protective Grounding) [ID# 1067]*,**,* 22.00*,*02*,*B0*
*Y*,*e*,*N*,*Y*,*C22.2 NO. 0.4-FM1982 (C1993)*,*Mise à la masse et mise à la terre de protection de l'appareillage électrique [ID# 1066]*,**,* 22.00*,*02*,*B0*
*Y*,*x*,*N*,*Y*,*C22.2 NO. 0.12-M1985 (R1992)*,*Wiring Space and Wire Bending Space in Enclosures for Equipment Rated 750 V or Less (rp:07/85) [ID# 1062]*,**,* 39.00*,*02*,*B0*
*Y*,*f*,*N*,*Y*,*C22.2 NO. 17-1973 (R1980) (R1992)*,*Cable for Luminous-Tube Signs and for Oil- and Gas-Burner Ignition Equipment (a:8) [ID# 1232]*,**,* 14.00*,*02*,*C0*
*Y*,*e*,*N*,*Y*,*C22.2 NO. 17-F1973 (C1980) (C1992)*,*Câbles pour enseignes à tubes lumineux et pour équipement d'allumage des brûleurs à mazout et à gaz [ID# 1231]*,**,* 14.00*,*02*,*C0*
*Y*,*x*,*N*,*Y*,*C22.2 NO. 26-1952 (R1993)*,*Construction and Test of Wireways, Auxiliary Gutters and Associated Fittings (a:7) [ID# 1336]*,**,* 14.00*,*02*,*C0*
*Y*,*f*,*N*,*Y*,*C22.2 NO. 34-M1987 (R1993)*,*Electrode Receptacles, Fittings, and Connectors for Gas Tubes (rp:03/91) [ID# 1358]*,**,* 42.00*,*02*,*C0*
*Y*,*e*,*N*,*Y*,*C22.2 NO. 34-FM1987 (C1993)*,*Prises d'électrode, accessoires et connecteurs pour tubes à atmosphère gazeuse (ps:03/91) [ID# 2437]*,**,* 42.00*,*02*,*C0*
*Y*,*f*,*N*,*Y*,*C22.2 NO. 35-M1987 (R1993)*,*Extra-Low-Voltage Control Circuit Cables, Low-Energy Control Cable, and Extra- Low-Voltage Control Cable [ID# 1362]*,**,* 40.00*,*02*,*C0*
*Y*,*e*,*N*,*Y*,*C22.2 NO. 35-FM1987 (C1993)*,*Câbles pour circuits de commande très basse tension, câble de commande faible énergie et câble de commande très basse tension [ID# 1360]*,**,* 40.00*,*02*,*C0*
*Y*,*e*,*N*,*Y*,*C22.2 NO. 40-FM1989*,*Boîtes de coupe-circuit, de jonction et de tirage (ps:03/92) [ID# 3018]*,**,* 51.00*,*02*,*C0*
*Y*,*f*,*N*,*Y*,*C22.2 NO. 41-M1987 (R1993)*,*Grounding and Bonding Equipment [ID# 1381]*,**,* 49.00*,*02*,*C0*
*Y*,*e*,*N*,*Y*,*C22.2 NO. 41-FM1987 (C1993)*,*Matériel de mise à la terre et de mise à la masse [ID# 2303]*,**,* 49.00*,*02*,*C0*
*Y*,*f*,*N*,*Y*,*C22.2 NO. 42-M1984*,*General Use Receptacles, Attachment Plugs, and Similar Wiring Devices (rp:08/84, 03/85, 09/85, 05/86, 02/87, 06/87, 08/88, 06/90, 11/90) [ID# 1385]*,**,* 36.00*,*02*,*C0*
*Y*,*e*,*N*,*Y*,*C22.2 NO. 42-FM1984*,*Prises de courant, fiches et dispositifs similaires pour usage général (ps:11/90) [ID# 1383]*,**,* 36.00*,*02*,*C0*
*Y*,*f*,*N*,*Y*,*C22.2 NO. 82-1969 (R1992)*,*Tubular Support Members and Associated Fittings for Domestic and Commercial Service Masts [ID# 1483]*,**,* 14.00*,*02*,*C0*
*Y*,*e*,*N*,*Y*,*C22.2 NO. 82-F1969 (C1992)*,*Éléments de support tubulaires et garnitures pour les mâts de branchement résidentiels et commerciaux [ID# 1482]*,**,* 14.00*,*02*,*C0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-C22.2 NO. 131-FM89*,*Câbles de type TECK 90 [ID# 2834]*,**,* 51.00*,*02*,*C0*
*Y*,*f*,*N*,*Y*,*C22.2 NO. 138-M1989*,*Heat Tracing Cable and Cable Sets for Use in Hazardous Locations [ID# 2496]*,**,* 44.00*,*02*,*C0*
*Y*,*e*,*N*,*Y*,*C22.2 NO. 138-FM1989*,*Câbles de traçage et câbles de traçage équipés destinés aux emplacements dangereux [ID# 2815]*,**,* 44.00*,*02*,*C0*
*Y*,*e*,*N*,*Y*,*C22.2 NO. 153-FM1981 (C1992)*,*Bornes enfichables pour connexion rapide (a:1) (ps:11/83) [ID# 1204]*,**,* 27.00*,*02*,*C0*
*Y*,*f*,*N*,*Y*,*C22.2 NO. 159-M1987 (R1993)*,*Attachment Plugs, Receptacles, and Similar Wiring Devices for Use in Hazardous Locations: Class I, Groups A, B, C, and D; Class II, Group G, in Coal or Coke Dust, and in Gaseous Mines [ID# 1217]*,**,* 51.00*,*02*,*C0*
*N*,*e*,*N*,*Y*,*C22.2 NO. 159-FM1987 (C1993)*,*Fiches, prises et dispositifs de câblage similaires destinés aux emplacements dangereux de classe I, groupes A, B, C et D, et de classe II, groupe G (en présence de poussière de charbon ou de coke), et dans les mines grisouteuses [ID# 3350]*,**,* 51.00*,*02*,*C0*
*Y*,*f*,*N*,*Y*,*C22.2 NO. 174-M1984 (R1992)*,*Cables and Cable Glands for Use in Hazardous Locations (rp:02/85, 12/87, 02/88, 09/89) [ID# 1235]*,**,* 30.00*,*02*,*C0*
*Y*,*e*,*N*,*Y*,*C22.2 NO. 174-FM1984 (C1992)*,*Câbles et bagues de câbles pour emplacements dangereux [ID# 2787]*,**,* 30.00*,*02*,*C0*
*Y*,*f*,*N*,*Y*,*C22.2 NO. 179-M1987 (R1993)*,*Airport Series Lighting Cables [ID# 1244]*,**,* 43.00*,*02*,*C0*
*Y*,*e*,*N*,*Y*,*C22.2 NO. 179-FM1987 (C1993)*,*Câbles pour balises aéroportuaires lumineuses raccordées en série [ID# 2507]*,**,* 43.00*,*02*,*C0*
*Y*,*f*,*N*,*Y*,*C22.2 NO. 182.1-1988 (R1993)*,*Industrial Type, Special Use Attachment Plugs, Receptacles, and Connectors (rp:07/88, 11/88, 11/89) [ID# 1250]*,**,* 40.00*,*02*,*C0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-C22.2 NO. 182.4-M90*,*Plugs, Receptacles, and Connectors for Communication Systems (rp:01/92, 03/92) [ID# 2697]*,**,* 42.00*,*02*,*C0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-C22.2 NO. 182.4-FM90*,*Fiches, prises et connecteurs pour réseaux de télécommunication (ps:03/92) [ID# 3218]*,**,* 42.00*,*02*,*C0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-C22.2 NO. 239-FM91*,*Câbles de commande et de mesure [ID# 3321]*,**,* 51.00*,*02*,*C0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-C22.2 NO. 241-M91*,*IEEE Standard for Cable Joints for Use with Extruded Dielectric Cable Rated 5000 V Through 46 000 V and Cable Joints for Use with Laminated Dielectric Cable Rated 2500 V Through 500 000 V (Adopted IEEE 404-1986) [ID# 2887]*,**,* 20.00*,*02*,*C0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-C22.2 NO. 241-FM91*,*Norme IEEE sur les joints des câbles à diélectrique extrudé dont les tensions nominales sont comprises entre 5 000 et 46 000 V, et des câbles à diélectrique stratifié de 2 500 à 500 000 V (norme IEEE 404-1986 adoptée) [ID# 3325]*,**,* 20.00*,*02*,*C0*
*N*,*f*,*N*,*Y*,*CAN/CSA-C22.2 NO. 242-92*,*IEEE Standard Test Procedures and Requirements for High-Voltage Alternating-Current Cable Terminations (Adopted IEEE 48-1990) [ID# 3365]*,**,* 35.00*,*02*,*C0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-C22.2 NO. 242-F92*,*Norme IEEE sur les exigences et les modes opératoires d'essai des boîtes d'extrémité de câble à haute tension c.a. (norme IEEE 48:1990 adoptée) [ID# 3637]*,**,* 35.00*,*02*,*C0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-C22.2 NO. 5.1-FM91*,*Pratiques recommandées pour la protection en matière d'électricité: contact entre les lignes aériennes d'énergie et de télécommunications [ID# 4460]*,**,* 87.00*,*02*,*D0*
*Y*,*x*,*N*,*Y*,*CAN/CSA-C22.2 NO. 5.2-M90*,*Moulded Case Switches [ID# 2733]*,**,* 49.00*,*02*,*D0*
*Y*,*f*,*N*,*Y*,*C22.2 NO. 13-1962 (R1968) (R1992)*,*Transformers for Luminous-Tube Signs, Oil- or Gas-Burner Ignition Equipment, Cold-Cathode Interior Lighting [ID# 1148]*,**,* 18.00*,*02*,*D0*
*Y*,*x*,*N*,*Y*,*C22.2 NO. 13-F1962 (C1968) (C1992)*,*Transformateurs pour enseignes à tubes lumineux, équipement d'allumage de brûleurs à mazout ou à gaz, et éclairage intérieur par tube à cathode froide [ID# 1147]*,**,* 18.00*,*02*,*D0*
*Y*,*f*,*N*,*Y*,*C22.2 NO. 30-M1986 (R1992)*,*Explosion-Proof Enclosures for Use in Class I Hazardous Locations (rp:11/88) [ID# 1348]*,**,* 39.00*,*02*,*D0*
*Y*,*e*,*N*,*Y*,*C22.2 NO. 30-FM1986 (C1992)*,*Coffrets antidéflagrants pour emplacements dangereux de classe I [ID# 2515]*,**,* 39.00*,*02*,*D0*
*Y*,*e*,*N*,*Y*,*C22.2 NO. 180-FM1983 (C1993)*,*Transformateurs d'isolement série pour l'éclairage des installations aéroportuaires (ps:12/90) [ID# 1248]*,**,* 23.00*,*02*,*D0*
*N*,*e*,*N*,*Y*,*C22.2 NO. 183.1-FM1982 (C1992)*,*Installations électriques à courant alternatif (c.a.) à bord des bateaux [ID# 1255]*,**,* 27.00*,*02*,*D0*
*Y*,*x*,*N*,*Y*,*C22.2 NO. 213-M1987 (R1992)*,*Non-Incendive Electrical Equipment for Use in Class I, Division 2 Hazardous Locations [ID# 1311]*,**,* 50.00*,*02*,*D0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-C22.2 NO. 223-M91*,*Power Supplies with Extra-Low-Voltage Class 2 Outputs [ID# 3022]*,**,* 58.00*,*02*,*D0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-C22.2 NO. 223-FM91*,*Blocs d'alimentation à sorties très basse tension de classe 2 [ID# 3493]*,**,* 58.00*,*02*,*D0*
*Y*,*f*,*N*,*Y*,*C22.2 NO. 229-M1988*,*Switching and Metering Centres [ID# 2328]*,**,* 67.00*,*02*,*D0*
*Y*,*e*,*N*,*Y*,*C22.2 NO. 229-FM1988*,*Tableaux de commutation et de mesurage [ID# 2689]*,**,* 67.00*,*02*,*D0*
*Y*,*f*,*N*,*Y*,*C22.2 NO. 22-M1986 (R1992)*,*Electrical Equipment for Flammable and Combustible Fuel Dispensers [ID# 1318]*,**,* 29.00*,*02*,*E0*
*Y*,*x*,*N*,*Y*,*C22.2 NO. 22-FM1986 (C1992)*,*Caractéristiques électriques des distributeurs de carburants inflammables et combustibles [ID# 2640]*,**,* 29.00*,*02*,*E0*
*Y*,*x*,*N*,*Y*,*C22.2 NO. 23.1-M1986 (R1992)*,*Electric Furnaces in Combination with Solid Fuel Fired Furnaces [ID# 1330]*,**,* 25.00*,*02*,*E0*
*Y*,*x*,*N*,*Y*,*C22.2 NO. 24-93*,*Temperature-Indicating and -Regulating Equipment [ID# 3858]*,**,* 89.00*,*02*,*E0*
*Y*,*f*,*N*,*Y*,*C22.2 NO. 37-M1989*,*Christmas Tree and Other Decorative Lighting Outfits (a:1) (rp:08/90) [ID# 1368]*,**,* 53.00*,*02*,*E0*
*Y*,*e*,*N*,*Y*,*C22.2 NO. 37-FM1989*,*Appareils d'éclairage pour arbres de Noël et autres usages décoratifs (ps:08/90) [ID# 2639]*,**,* 53.00*,*02*,*E0*
*Y*,*x*,*N*,*Y*,*C22.2 NO. 166-M1983*,*Stage and Studio Luminaires (e:1) [ID# 1225]*,**,* 25.00*,*02*,*E0*
*Y*,*x*,*N*,*Y*,*C22.2 NO. 187-M1986 (R1992)*,*Electrostatic Air Cleaners [ID# 1268]*,**,* 39.00*,*02*,*E0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-C22.2 NO. 199-M89*,*Combustion Safety Controls and Solid-State Igniters for Gas- and Oil-Burning Equipment [ID# 2555]*,**,* 88.00*,*02*,*E0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-C22.2 NO. 199-FM89*,*Dispositifs de surveillance de flamme et allumeurs à semi-conducteurs pour appareils à gaz et à mazout [ID# 3533]*,**,* 88.00*,*02*,*E0*
*Y*,*f*,*N*,*Y*,*C22.2 NO. 206-M1987 (R1993)*,*Lighting Poles [ID# 1296]*,**,* 24.00*,*02*,*E0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-C22.2 NO. 217-M89*,*Radiant Space Heating Panels, Panel Sets, and Systems [ID# 2613]*,**,* 56.00*,*02*,*E0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-C22.2 NO. 217-FM89*,*Panneaux radiants pour le chauffage des locaux [ID# 4495]*,**,* 56.00*,*02*,*E0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-C22.2 NO. 218.1-M89*,*Spas, Hot Tubs, and Associated Equipment [ID# 2556]*,**,* 103.00*,*02*,*E0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-C22.2 NO. 218.1-FM89*,*Cuves à remous et matériel connexe [ID# 3597]*,**,* 103.00*,*02*,*E0*
*Y*,*x*,*N*,*Y*,*CAN/CSA-C22.2 NO. 224-M89*,*Radiant Heaters and Infrared and Ultraviolet Lamp Assemblies for Cosmetic or Hygienic Purposes in Nonmedical Applications (rp:05/90) [ID# 2558]*,**,* 79.00*,*02*,*E0*
*Y*,*x*,*N*,*Y*,*CAN/CSA-C22.2 NO. 231 SERIES-M89*,*CSA Safety Requirements for Electrical and Electronic Measuring and Test Equipment [ID# 2572]*,**,* 111.00*,*02*,*E0*
*Y*,*x*,*N*,*Y*,*C22.2 NO. 231SP-M1990*,*Audit Checklist and Test Pack for Use with CAN/CSA-C22.2 No. 231 Series-M89, CSA Safety Requirements for Electrical and Electronic Measuring and Test Equipment [ID# 2755]*,**,* 20.00*,*02*,*E0*
*Y*,*x*,*N*,*Y*,*CAN/CSA-C22.2 NO. 236-M90*,*Heating and Cooling Equipment [ID# 2768]*,**,* 70.00*,*02*,*E0*
*N*,*x*,*N*,*Y*,*CAN/CSA-C22.2 NO. 1010.1-92*,*Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use, Part 1: General Requirements (Adopted IEC 1010-1:1990 with Modification) [ID# 3459]*,**,* 74.00*,*02*,*E0*
*Y*,*x*,*N*,*Y*,*CAN/CSA-C22.2 NO. 1-94*,*Audio, Video and Similar Electronic Equipment [ID# 4310]*,**,* 110.00*,*02*,*F0*
*Y*,*x*,*N*,*Y*,*C22.2 NO. 98-1954 (R1965) (R1992)*,*Construction and Test of Power-Operated Radio Transmitters (a:1) [ID# 1502]*,**,* 14.00*,*02*,*F0*
*Y*,*x*,*N*,*Y*,*C22.2 NO. 99-1954 (R1971) (R1992)*,*Construction and Test of Domestic Electric Ironing Machines [ID# 1503]*,**,* 14.00*,*02*,*F0*
*Y*,*f*,*N*,*Y*,*C22.2 NO. 101-M1984 (R1992)*,*Electrically Heated Bedding Appliances for Household Use (rp:01/87, 02/90, 03/93) [ID# 1086]*,**,* 36.00*,*02*,*F0*
*Y*,*e*,*N*,*Y*,*C22.2 NO. 101-FM1984 (C1992)*,*Articles de literie à éléments chauffants pour usage domestique (a:1) (ps:02/90) [ID# 2383]*,**,* 36.00*,*02*,*F0*
*Y*,*e*,*N*,*Y*,*C22.2 NO. 109-FM1981*,*Appareils de cuisson pour usage commercial (e:1) [ID# 1096]*,**,* 25.00*,*02*,*F0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-C22.2 NO. 110-M90*,*Construction and Test of Electric Storage-Tank Water Heaters [ID# 2663]*,**,* 64.00*,*02*,*F0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-C22.2 NO. 110-FM90*,*Construction et mise à l'essai des chauffe-eau électriques à accumulation [ID# 3178]*,**,* 64.00*,*02*,*F0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-C22.2 NO. 150-FM89*,*Fours à micro-ondes [ID# 3356]*,**,* 60.00*,*02*,*F0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-C22.2 NO. 157-92*,*Intrinsically Safe and Non-Incendive Equipment for Use in Hazardous Locations [ID# 3361]*,**,* 61.00*,*02*,*F0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-C22.2 NO. 157-F92*,*Appareils à sécurité intrinsèque et appareils non incendiaires pour emplacementsdangereux [ID# 4465]*,**,* 61.00*,*02*,*F0*
*Y*,*x*,*N*,*Y*,*CAN/CSA-C22.2 NO. 234-M90*,*Safety of Component Power Supplies (rp:01/91, 11/91) [ID# 2701]*,**,* 101.00*,*02*,*F0*
*Y*,*x*,*N*,*Y*,*CAN/CSA-C22.2 NO. 243-M91*,*Vacuum Cleaners and Blower Cleaners (Joint Standard UL 1017) (rp:03/93, 05/93) [ID# 3219]*,**,* 70.00*,*02*,*F0*
*Y*,*x*,*N*,*Y*,*CAN/CSA-C22.2 NO. 247-92*,*Operators and Systems of Doors, Gates, Draperies, and Louvres [ID# 3421]*,**,* 42.00*,*02*,*F0*
*Y*,*x*,*N*,*Y*,*CAN/CSA-C22.2 NO. 335.1-93*,*Safety of household and similar electrical appliances--Part 1: General requirements (Adopted IEC 335-1:1991) Sécurité des appareils électrodomestiqueset analogues--Partie 1: Prescriptions générales (norme CEI 335-1:1991 adoptée) [ID# 4357]*,**,* 125.00*,*02*,*F0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-C22.2 NO. 335.1-F93*,*Comité technique sur les produits commerciaux et grand public (norme CEI 335-1:1991 adoptée) [ID# 4513]*,**,* 125.00*,*02*,*F0*
*Y*,*x*,*N*,*Y*,*CAN/CSA-C22.2 NO. 950-M89*,*Safety of Information Technology Equipment, Including Electrical Business Equipment [ID# 2585]*,**,* 108.00*,*02*,*F0*
*Y*,*f*,*N*,*Y*,*C22.2 NO. 1335.1-93*,*Portable Electrical Motor-Operated and Heating Appliances: General Requirements [ID# 3461]*,**,* 100.00*,*02*,*F0*
*Y*,*e*,*N*,*Y*,*C22.2 NO. 1335.1-F93*,*Appareils électriques portatifs à moteur et de chauffage: Exigences générales [ID# 4475]*,**,* 100.00*,*02*,*F0*
*Y*,*f*,*N*,*Y*,*C22.2 NO. 1335.2.9-93*,*Portable Electrical Motor-Operated and Heating Appliances: Particular Requirements for Portable Electric Cooking Appliances [ID# 3462]*,**,* 38.00*,*02*,*F0*
*Y*,*e*,*N*,*Y*,*C22.2 NO. 1335.2.9-F93*,*Appareils électriques portatifs à moteur et de chauffage: Exigences particulières sur les appareils de cuisson [ID# 4476]*,**,* 38.00*,*02*,*F0*
*Y*,*x*,*N*,*Y*,*C22.2 NO. 1335.2.14-93*,*Portable Electrical Motor-Operated and Heating Appliances: Particular Requirements for Electrical Motor-Operated Kitchen Appliances [ID# 3463]*,**,* 58.00*,*02*,*F0*
*Y*,*f*,*N*,*Y*,*C22.2 NO. 1335.2.15-93*,*Portable Electrical Motor-Operated and Heating Appliances: Particular Requirements for Liquid-Heating Appliances [ID# 3464]*,**,* 37.00*,*02*,*F0*
*Y*,*e*,*N*,*Y*,*C22.2 NO. 1335.2.15-F93*,*Appareils électriques portatifs à moteur et de chauffage: règles particulières sur les appareils de chauffage des liquides [ID# 4477]*,**,* 37.00*,*02*,*F0*
*N*,*f*,*N*,*Y*,*CAN/CSA-C22.3 NO. 1-M87*,*Overhead Systems [ID# 416]*,**,* 59.00*,*02*,*F1*
*N*,*x*,*N*,*Y*,*C22.3 NO. 3.1-1974*,*Inductive Coordination Handbook for Use with CSA Standard C22.3 No. 3-1954 of the Canadian Electrical Code, Part III [ID# 1511]*,**,* 14.00*,*02*,*F1*
*N*,*x*,*N*,*Y*,*C22.3 NO. 4-1974 (R1980)*,*Control of Electrochemical Corrosion of Underground Metallic Structures [ID# 1513]*,**,* 14.00*,*02*,*F1*
*N*,*x*,*N*,*Y*,*CAN/CSA-C22.3 NO. 6-M91*,*Principles and Practices of Electrical Coordination Between Pipelines and Electric Supply Lines [ID# 3117]*,**,* 52.00*,*02*,*F1*
*N*,*x*,*N*,*Y*,*CAN3-C22.3 NO. 7-M86*,*Underground Systems [ID# 691]*,**,* 34.00*,*02*,*F1*
*N*,*x*,*N*,*Y*,*CAN/CSA-C2-M91*,*Single-Phase and Three-Phase Distribution Transformers, Types ONAN and LNAN (rp:06/92) [ID# 3100]*,**,* 46.00*,*02*,*G0*
*N*,*f*,*N*,*Y*,*C9.1-M1981*,*Guide for Loading Dry-Type Distribution and Power Transformers [ID# 1602]*,**,* 21.00*,*02*,*G0*
*N*,*e*,*N*,*Y*,*C9.1-FM1981*,*Guide de détermination de la charge des transformateurs de distribution et des transformateurs de puissance de type sec [ID# 1601]*,**,* 21.00*,*02*,*G0*
*N*,*f*,*N*,*Y*,*CAN3-C49.7-M85 (R1990)*,*Aluminum Round Wires for Use in Overhead Electrical Conductors [ID# 702]*,**,* 34.00*,*02*,*G0*
*N*,*e*,*N*,*Y*,*CAN3-C49.7-FM85 (C1990)*,*Fils d'aluminium de section circulaire pour conducteurs aériens [ID# 701]*,**,* 34.00*,*02*,*G0*
*N*,*x*,*N*,*Y*,*C50-1976*,*Insulating Oil, Electrical for Transformers and Switches (a:5) (e:2) [ID# 1584]*,**,* 14.00*,*02*,*G0*
*N*,*x*,*N*,*Y*,*C57-1966*,*Electric Power Connectors for Use in Overhead Line Conductors [ID# 1585]*,**,* 14.00*,*02*,*G0*
*Y*,*x*,*N*,*Y*,*CAN/CSA-C68.1-92*,* Specifications for Impregnated Paper-Insulated Metallic-Sheathed Cable, Solid Type (Adopted AEIC CS1-90, with modifications) [ID# 3422]*,**,* 60.00*,*02*,*G0*
*N*,*x*,*N*,*Y*,*CAN/CSA-C68.3-M92*,*Shielded and Concentric Neutral Power Cables Rated 5-46 kV [ID# 3268]*,**,* 60.00*,*02*,*G0*
*N*,*x*,*N*,*Y*,*CAN/CSA-C83-M87*,*Communication and Power Line Hardware (rp:12/90) [ID# 423]*,**,* 83.00*,*02*,*G0*
*N*,*x*,*N*,*Y*,*CAN/CSA-C88-M90*,*Power Transformers and Reactors (rp:11/90) [ID# 2785]*,**,* 71.00*,*02*,*G0*
*N*,*f*,*N*,*Y*,*CAN3-C155-M84*,*Shunt Capacitors for AC Power Systems (rp:05/86) [ID# 683]*,**,* 30.00*,*02*,*G0*
*N*,*e*,*N*,*Y*,*CAN3-C155-FM84*,*Condensateurs de dérivation pour réseaux d'alimentation à courant alternatif (ps:05/86) [ID# 682]*,**,* 30.00*,*02*,*G0*
*N*,*f*,*N*,*Y*,*CAN/CSA-C156.1-M86*,*Ceramic and Glass Station Post Insulators [ID# 413]*,**,* 45.00*,*02*,*G0*
*N*,*e*,*N*,*Y*,*CAN/CSA-C156.1-FM86*,*Supports isolants en céramique ou en verre [ID# 412]*,**,* 45.00*,*02*,*G0*
*N*,*f*,*N*,*Y*,*CAN/CSA-C156.3-M86*,*Test Methods for Station Post Insulators [ID# 415]*,**,* 45.00*,*02*,*G0*
*N*,*e*,*N*,*Y*,*CAN/CSA-C156.3-FM86*,*Méthodes d'essai des supports isolants [ID# 414]*,**,* 45.00*,*02*,*G0*
*N*,*x*,*N*,*Y*,*C170.2-1966 (R1979) (R1989)*,*Polyethylene Protective Covering on Paper-Insulated Metallic-Sheathed Power Cable (a:2) (e:2) [ID# 1039]*,**,* 14.00*,*02*,*G0*
*N*,*x*,*N*,*Y*,*C170.3-1966 (R1979) (R1989)*,*Polyvinyl-Chloride (PVC) Protective Covering on Paper-Insulated Metallic-Sheathed Power Cable [ID# 1040]*,**,* 14.00*,*02*,*G0*
*N*,*f*,*N*,*Y*,*C227.1-1975 (R1987)*,*Single-Phase Pad Mounted Distribution Transformers [ID# 1520]*,**,* 14.00*,*02*,*G0*
*N*,*e*,*N*,*Y*,*C227.1-F1975 (C1987)*,*Transformateurs de distribution monophasés montés sur socle [ID# 1519]*,**,* 14.00*,*02*,*G0*
*N*,*f*,*N*,*Y*,*CAN/CSA-C227.2-88*,*Three-Phase, Live-Front, Pad-Mounted Distribution Transformers [ID# 417]*,**,* 43.00*,*02*,*G0*
*N*,*e*,*N*,*Y*,*CAN/CSA-C227.2-F88*,*Transformateurs de distribution triphasés à face non isolée, montés sur socle [ID# 2436]*,**,* 43.00*,*02*,*G0*
*N*,*x*,*N*,*Y*,*CAN/CSA-C227.3-M91*,*Low-Profile, Single-Phase, Dead-Front, Pad-Mounted Distribution Transformers (rp:02/92) [ID# 2385]*,**,* 26.00*,*02*,*G0*
*N*,*x*,*N*,*Y*,*C227.4-M1978 (R1987)*,*Three-Phase, Dead-Front, Pad-Mounted Distribution Transformers (e:1) [ID# 1524]*,**,* 20.00*,*02*,*G0*
*N*,*x*,*N*,*Y*,*C233-1972*,*Non-Linear Resistor (Valve) Type Lightning Arresters for Alternating Current Systems / Parafoudres à résistance variable pour le protection des réseaux à courant alternatif (Bilingual standard/norme bilingue) [ID# 1526]*,**,* 19.00*,*02*,*G0*
*N*,*f*,*N*,*Y*,*CAN/CSA-C233.1-87*,*Gapless Metal Oxide Surge Arresters for Alternating Current Systems [ID# 418]*,**,* 47.00*,*02*,*G0*
*N*,*e*,*N*,*Y*,*CAN/CSA-C233.1-F87*,*Parafoudres à résistance variable en oxyde métallique, sans éclateur, pour les réseaux à courant alternatif [ID# 2485]*,**,* 47.00*,*02*,*G0*
*N*,*f*,*N*,*Y*,*CAN3-C235-83*,*Preferred Voltage Levels for AC Systems, 0 to 50 000 V [ID# 693]*,**,* 17.00*,*02*,*G0*
*N*,*e*,*N*,*Y*,*CAN3-C235-F83*,*Tensions recommandées pour les réseaux à courant alternatif de 0 à 50 000 V [ID# 692]*,**,* 17.00*,*02*,*G0*
*N*,*x*,*N*,*Y*,*C301.1-1976 (R1987)*,*Single-Phase Submersible Distribution Transformers, Type ONAN [ID# 1553]*,**,* 14.00*,*02*,*G0*
*N*,*x*,*N*,*Y*,*C301.2-M1979 (R1987)*,*Three-Phase Submersible Distribution Transformers, Type ONAN [ID# 1554]*,**,* 14.00*,*02*,*G0*
*N*,*f*,*N*,*Y*,*CAN3-C308-M85*,*The Principles and Practice of Insulation Coordination [ID# 697]*,**,* 36.00*,*02*,*G0*
*N*,*e*,*N*,*Y*,*CAN3-C308-FM85*,*Principes et pratiques de la coordination de l'isolement [ID# 2566]*,**,* 36.00*,*02*,*G0*
*N*,*e*,*N*,*Y*,*CAN/CSA-C411.1-FM89*,*Isolateurs de suspension (éléments de chaîne) [ID# 2868]*,**,* 64.00*,*02*,*G0*
*N*,*x*,*N*,*Y*,*ANSI/IEEE 1-1986*,*Standard General Principles for Temperature Limits in the Rating of Electrical Equipment and for the Evaluation of Electrical Insulation [ID# 43]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 85-1984*,*Thermal Evaluation and Classification of Electrical Insulation [ID# 2969]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 93-1980 (R1991)*,*Methods of Test for Volume Resistivity and Surface Resistivity of Solid Electrical Insulating Materials [ID# 1791]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 112-1979 (R1991)*,*Method for Determining the Comparative and the Proof Tracking Indices of Solid Insulating Materials Under Moist Conditions [ID# 1729]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 167-1964 (R1991)*,*Methods of Test for the Determination of the Insulation Resistance of Solid Insulating Materials [ID# 1730]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 212-1971 (R1991)*,*Standard Conditions for use Prior to and During the Testing of Solid Electrical Insulating Materials [ID# 1731]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 216-1-1974*,*Guide for the Determination of Thermal Endurance Properties of Electrical Insulating Materials, Part 1: General Procedures for the Determination of Thermal Endurance Properties, Temperature Indices and Thermal Endurance Profiles [ID# 1732]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 216-1-1990*,*Guide for the Determination of Thermal Endurance Properties of Electrical Insulating Materials, Part I: General Guidelines for Aging and Evaluation of Test Results [ID# 2970]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 216-2-1990*,*Guide for the Determination of Thermal Endurance Properties of Electrical Insulating Materials, Part 2: List of Materials and Available Tests [ID# 2971]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 216-3-1-1990*,*Guide for the Determination of Thermal Endurance Properties of Electrical Insulating Materials, Part 3: Instructions for Calculating the Thermal Endurance Characteristics, Section 1: Calculations using Mean Values of Normally Distr*,*ibuted Complete Data [ID# 2972]*,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 216-4-1-1990*,*Guide for the Determination of Thermal Endurance Properties of Electrical Insulating Materials, Part 4: Ageing Ovens, Section 1: Single-Chamber Ovens [ID# 2973]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 216-5-1990*,*Guide for the Determination of Thermal Endurance Properties of Electrical Insulating Materials, Part 5: Guidelines for the Application of Thermal Endurance Characteristics [ID# 2974]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 243-1967*,*Recommended Methods of Test for Electric Strength of Solid Insulating Materials at Power Frequencies [ID# 1736]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 243-1-1988*,*Methods of Test for Electric Strength of Solid Insulating Materials, Part 1: Tests at Power Frequencies [ID# 2975]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 243-2-1990*,*Methods of Test for Electric Strength of Solid Insulating Materials, Part 2: Additional Requirements for Tests using Direct Voltage [ID# 2976]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 250-1969 (R1991)*,*Recommended Methods for the Determination of the Permittivity and Dielectric Dissipation Factor of Electrical Insulating Materials at Power, Audio and Radio Frequencies Including Metre Wavelengths [ID# 1737]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 290-1969 (R1991)*,*Evaluation of the Thermal Endurance of Electrical Insulating Varnishes by the Helical Bond Test [ID# 1738]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 343-1970 (R1991)*,*Recommended Test Methods for Determining the Relative Resistance of Insulating Materials to Breakdown by Surface Discharges [ID# 1739]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 345-1971 (R1991)*,*Method of Test for Electrical Resistance and Resistivity of Insulating Materials at Elevated Temperatures [ID# 1740]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 371-1-1980 (R1991)*,*Specification for Insulating Materials, Based on Built-Up Mica or Treated Mica Paper - Part 1: Definitions and General Requirements [ID# 1741]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 371-2-1973*,*Specification for Insulating Materials, based on MICA, Part 2: Methods of Test [ID# 1742]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 371-2-1987*,*Methods of Test for Electric Strength of Solid Insulating Materials, Part 2: Methods of Test [ID# 2977]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 371-3-1-1984 (R1991)*,*Specification for Insulating Materials, Part 3: Specifications for Individual Materials Sheet 1: Commutator Separators and Materials [ID# 1743]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 371-3-3-1983 (R1991)*,*Specification for Insulating Materials, based on MICA, Part 3: Specifications for Individual Materials, Sheet 3: Specification for Rigid Mica Materials for Heating Equipment [ID# 1744]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 377-1-1973 (R1991)*,*Recommended Methods for the Determination of the Dielectric Properties of Insulating Materials at Frequencies Above 300 MHz Part 1: General [ID# 1745]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 377-2-1977 (R1991)*,*Recommended Methods for the Determination of Dielectric Properties of Insulating Materials at Frequencies above 300 MHz, Part 2: Resonance Methods [ID# 1746]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 394-1-1972 (R1991)*,*Varnished Fabrics for Electrical Purposes, Part 1: Definitions and General Requirements [ID# 1747]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 394-2-1972 (R1991)*,*Varnished Fabrics for Electrical Purposes, Part 2: Methods of Test [ID# 1748]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 394-3-1-1976 (R1991)*,*Varnished Fabrics for Electrical Purposes, Part 3: Specification for Individual Materials, Sheet 1: Oleore Sindus Varnish - Cotton Base, OR/C [ID# 1749]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 394-3-2-1988*,*Methods of Test for Electric Strength of Solid Insulating Materials, Part 3: Specifications for Individual Materials, Sheet 2: Glass-Fabric Based Varnished Fabrics with Epoxy, Polyurethane, Silicone, Polyester, Bituminous or Oleoresinou*,*s Varnish [ID# 2978]*,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 426-1973 (R1991)*,*Test Methods for Determining Electrolytic Corrosion with Insulating Materials [ID# 1750]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 450-1974 (R1991)*,*Measurement of the Average Viscometric Degree of New and Aged Electrical Papers [ID# 1751]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 454-1-1974 (R1991)*,*Specifications for Pressure-Sensitive Adhesive Tapes for Electrical Purposes, Part 1: General Requirements [ID# 1752]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 454-2-1974 (R1991)*,*Specifications for Pressure-Sensitive Adhesive Tapes for Electrical Purposes, Part 2: Methods of Test [ID# 1753]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 454-2A-1978 (R1991)*,*First Supplement to Publication 454-2 (1974) To Specifications for Pressure- Sensitive Adhesive Tapes for Electrical Purposes, Part 2: Methods of Test [ID# 1754]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 454-3-1-1976 (R1991)*,* Specifications for Pressure-Sensitive Adhesive Tapes for Electrical Purposes, Part 3: Specifications for Individual Materials, Sheet 1: Requirements for Plasticized Polyvinylchloride with Non-Thermosetting Adhesive [ID# 1755]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 454-3-2-1981 (R1991)*,* Specifications for Pressure-Sensitive Adhesive Tapes for Electrical Purposes, Part 3, Specifications for Individual Materials, Sheet 2: Requirements for Polyester Film Tapes (PETP) with Thermosetting Adhesive [ID# 1756]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 454-3-3-1981 (R1991)*,* Specifications for Pressure-Sensitive Adhesive Tapes for Electrical Purposes, Part 3, Specifications for Individual Materials, Sheet 3: Requirements for Polyester Film Tapes (PETP) with Non-Thermosetting Adhesive [ID# 1757]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 454-3-4-1978 (R1991)*,* Specifications for Pressure-Sensitive Adhesive Tapes for Electrical Purposes, Part 3, Specifications for Individual Materials, Sheet 4: Requirements for Cellulosic Paper, Creped, with Thermosetting Adhesive [ID# 1758]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 454-3-5-1980 (R1991)*,*Specifications for Pressure-Sensitive Adhesive Tapes for Electrical Purposes, Part 3, Specifications for Individual Materials, Sheet 5: Requirements for Cellulosic Paper with Thermosetting Adhesive [ID# 1759]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 454-3-6-1984*,*Methods of Test for Electric Strength of Solid Insulating Materials, Sheet 6: Requirements for Polycarbonate Film Tapes with Non-Thermosetting Adhesives [ID# 2979]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 454-3-7-1984*,*Methods of Test for Electric Strength of Solid Insulating Materials, Sheet 7: Requirements for Polymide Film Tapes with Thermosetting Adhesives [ID# 2980]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 454-3-8-1986*,*Methods of Test for Electric Strength of Solid Insulating Materials, Part 3: Specifications for Individual Materials, Sheet 8: Requirements for Glass-Fabric Tapes with Thermosetting Adhesives [ID# 2981]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 455-1-1974 (R1991)*,*Specification for Solventless Polymerisable Resinous Compounds Used for Electrical Insulation, Part 1: Definitions and General Requirements [ID# 1760]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 455-1A-1980 (R1991)*,*Specification for Solventless Polymerisable Resinous Compounds used for Electrical Insulation, Part I: Definitions and General Requirements, First Supplement to Publication 455-1 (1974) - Basis for Polymerisable Resinous Compounds*,* [ID# 1761]*,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 455-2-1977 (R1991)*,*Specification for Solventless Polymerisable Resinous Compound used for Electrical Insulation, Part 2: Methods of Test, Amendment No. 1 to Publication 455-2 (1977), dated December 1982 [ID# 1762]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 455-2-2-1984*,*Methods of Test for Electric Strength of Solid Insulating Materials, Part 2: Methods of Test. Test Methods for Coating Powders for Electrical Purposes [ID# 2982]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 455-3-1-1981 (R1991)*,*Specification for Solventless Polymerisable Resinous Compounds used for Electrical Insulation, Part 3: Specifications for Individual Materials, Sheet 1:Unfilled Epoxy Resinous Compounds [ID# 1763]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 455-3-2-1987*,*Methods of Test for Electric Strength of Solid Insulating Materials, Sheet 2: Quartz Filled Epoxy Resinous Compounds [ID# 2983]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 455-3-3-1984*,*Methods of Test for Electric Strength of Solid Insulating Materials, Sheet 3: Unfilled Polyurethane Compounds [ID# 2984]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 455-3-4-1984*,*Methods of Test for Electric Strength of Solid Insulating Materials, Sheet 4: Filled Polyurethane Compounds [ID# 2985]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 455-3-5-1989*,*Methods of Test for Electric Strength of Solid Insulating Materials, Sheet 5: Unsaturated Polyester Impregnated Resins [ID# 2986]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 455-3-11-1988*,*Methods of Test for Electric Strength of Solid Insulating Materials, Part 3: Specification for Individual Materials, Sheet 11: Epoxy Resin-Based Coating Powders [ID# 2987]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 464-1-1976 (R1991)*,*Specification for Insulating Varnishes Containing Solvents, Part 1: Definitions and General Requirements [ID# 1764]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 464-2-1974 (R1991)*,*Specification for Insulating Varnishes containing Solvents, Part 2: Test Methods [ID# 1765]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 464-3-1-1986*,*Methods of Test for Electric Strength of Solid Insulating Materials, Part 3: Specifications for Individual Materials, Sheet 1: Requirements for Cold Cured Finishing Varnishes [ID# 2988]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 464-3-2-1989*,*Methods of Test for Electric Strength of Solid Insulating Materials, Part 3: Specifications for Individual Materials, Sheet 2: Requirements for Hot Curing Impregnating Varnishes [ID# 2989]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 493-1-1974 (R1991)*,*Guide for the Statistical Analysis of Aging Test Data, Part 1: Methods Based on Mean Values of Normally Distributed Test Results [ID# 1766]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 544-1-1977 (R1991)*,*Guide for Determining the Effects of Ionizing Radiation on Insulating Materials,Part 1: Radiation Interaction [ID# 1767]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 544-2-1979 (R1991)*,*Guide for Determining the Effects of Ionizing Radiation on Insulating Materials, Part 2: Procedures for Irradiation [ID# 1768]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 544-2*,*Methods of Test for Electric Strength of Solid Insulating Materials, Part 2: Methods of Test [ID# 2993]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 544-3-1979 (R1991)*,*Guide for Determining the Effects of Ionizing Radiation on Insulating Materials, Part 3: Test Procedures for Permanent Effects [ID# 1769]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 544-3-1*,*Methods of Test for Electric Strength of Solid Insulating Materials, Sheet 1: General Purpose Electrical Paper [ID# 2991]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 544-3-5*,*Methods of Test for Electric Strength of Solid Insulating Materials, Sheet 5: Special Papers [ID# 2992]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 544-4-1985*,*Methods of Test for Electric Strength of Solid Insulating Materials, Part 4: Classification Systems for Service in Radiation Environments [ID# 2990]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 554-1-1977 (R1991)*,*Specification for Cellulosic Papers for Electrical Purposes, Part 1: Definitions and General Requirements [ID# 1770]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 554-2-1977*,*Specification for Cellulosic Papers for Electrical Purposes, Part 2: Methods of Test [ID# 3208]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 554-3-1-1979*,*Specification for Cellulosic Papers for Electrical Purposes, Part 3: Specifications for Individual Materials, Sheet 1: General Purpose Electrical Paper. [ID# 3209]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 554-3-2-1983 (R1991)*,*Specification for Cellulosic Papers for Electrical Purposes, Part 3: Specifications for Individual Materials, Sheet 2: Capacitor Paper [ID# 1771]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 554-3-3-1980 (R1991)*,*Specification for Cellulosic Papers for Electrical Purposes, Part 3: Specifications for Individual Materials, Sheet 3: Crepe Paper [ID# 1772]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 554-3-4-1979 (R1991)*,*Specification for Cellulosic Papers for Electrical Purposes, Part 3: Specifications for Individual Materials, Sheet 4: Electrolytic Capacitor Paper [ID# 1773]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 554-3-5-1984*,*Specifications for Cellulosic Papers for Electrical Purposes, Part 3: Specifications for Individual Materials, Sheet 5: Special Papers [ID# 3210]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 587-1984 (R1991)*,*Test Method for Evaluating Resistance to Tracking and Erosion of Electrical Insulating Materials Used Under Severe Ambient Conditions [ID# 1774]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 589-1977 (R1991)*,*Method of Test for the Determination of Ionic Impurities in Materials by Extraction with Liquids [ID# 1775]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 626-1-1979 (R1991)*,*Specification for Combined Flexible Materials for Electrical Insulation, Part 1: Definitions and General Requirements [ID# 1776]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 626-2-1978 (R1991)*,*Specification for Combined Flexible Materials for Electrical Insulation, Part 2: Methods of Test [ID# 1777]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 626-3-1988*,*Methods of Test for Electric Strength of Solid Insulating Materials, Part 3: Specifications for Individual Materials [ID# 2994]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 641-1-1979 (R1991)*,*Specification for Pressboard and Presspaper for Electrical Purposes, Part 1: Definitions and General Requirements [ID# 1778]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 641-2-1979 (R1991)*,*Specification for Pressboard and Presspaper for Electrical Purposes, Part 2: Methods of Test [ID# 1779]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 648-1979 (R1991)*,*Method of Test for Coefficients of Friction of Plastic Film and Sheeting for Use as Electrical Insulation [ID# 1780]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 667-1-1980 (R1991)*,*Specification for Vulcanized Fibre for Electrical Purposes, Part 1: Definitions and General Requirements [ID# 1782]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 667-2-1982 (R1991)*,*Specification for Vulcanized Fibre for Electrical Purposes, Part 2: Methods of Test [ID# 1783]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 667-3-1-1986*,*Methods of Test for Electric Strength of Solid Insulating Materials, Part 3: Specifications for Individual Materials, Sheet 1: Flat Sheets [ID# 2995]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 672-1-1980 (R1991)*,*Specification for Ceramic and Glass Insulating Materials, Part 1: Definition and Classification [ID# 1784]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 672-2-1980 (R1991)*,*Specification for Ceramic and Glass Insulating Materials, Part 2: Methods of Test [ID# 1785]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 672-3-1984*,*Methods of Test for Electric Strength of Solid Insulating Materials, Part 3: Specification for Ceramic and Glass Insulating Materials [ID# 2996]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 674-1-1980 (R1991)*,*Specification for Plastic Films For Electrical Purposes, Part 1: Definitions and General Requirements [ID# 1786]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 674-2-1988*,*Specification for Plastic Films For Electrical Purposes, Part 2: Methods of Test [ID# 3207]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 674-3*,*Methods of Test for Electric Strength of Solid Insulating Materials, Part 2: Methods of Test [ID# 2997]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 684-1-1980 (R1991)*,*Specification for Flexible Insulating Sleeving, Part 1: Definitions and General Requirements [ID# 1787]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 684-2-1984*,*Methods of Test for Electric Strength of Solid Insulating Materials, Part 2: Methods of Test [ID# 2998]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 684-3-100 TO 105-1988*,*Methods of Test for Electric Strength of Solid Insulating Materials, Part 3: Specifications Requirements for Individual Types of Sleeving, Sheet 100 to 105: Extruded PVC Sleeving [ID# 2999]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 684-3-121 & 122-1988*,*Methods of Test for Electric Strength of Solid Insulating Materials, Sheet 121 and 122: Extruded Silicone Sleeving [ID# 3000]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 684-3-209-1987*,*Methods of Test for Electric Strength of Solid Insulating Materials, Part 3: Specification Requirements for Individual Types of Sleeving, Sheet 209: Heat Shrinkable Sleeving General Purpose, Flame Retarded Polyolefin Shrink Ratio 2:1 [ID# 3001]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 684-3-300-1987*,*Methods of Test for Electric Strength of Solid Insulating Materials, Part 3: Specification Requirements for Individual Types of Sleeving, Sheet 300: Glass Textile Fibre Sleeving, Braided, Uncoated [ID# 3002]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 684-3-320-1987*,*Methods of Test for Electric Strength of Solid Insulating Materials, Part 3: Specification Requirements for Individual Types of Sleeving, Sheet 320: Polyethylene Terephthalate Textile Lightly Impregnated [ID# 3003]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 684-3-403 TO 405-1988*,*Methods of Test for Electric Strength of Solid Insulating Materials, Sheets 403 to 405: Glass Textile Sleeving with Acrylic Based Coating [ID# 3004]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 684-3-406 TO 408-1988*,*Methods of Test for Electric Strength of Solid Insulating Materials, Part 3: Specification Requirements for Individual Types of Sleeving, Sheet 406 to 408: Glass Textile Sleeving with PVC Based Coating [ID# 3005]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 699-1981 (R1991)*,*Test Method for the Evaluation of Bond Strength of Impregnating Varnishes by the Wire Bundle Test [ID# 1788]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 707-1981 (R1991)*,*Methods of Test for the Determination of the Flammability of Solid Electrical Insulating Materials when Exposed to an Igniting Source [ID# 1789]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 763-1-1983 (R1991)*,*Specification for Laminated Pressboard, Part 1: Definitions, Classification and General Requirements [ID# 1790]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 795-1984*,*Test Method for Evaluating Thermal Endurance of Flexible Sheet Materials Using the Wrapped Tube Method [ID# 3006]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 819-1-1985*,*Part 1: Definitions and General Requirements [ID# 3007]*,**,* 0.00*,*02*,*H0*
*N*,*x*,*N*,*Y*,*IEC 893-1-1987*,*Part 1: Definitions, Designations and General Requirements [ID# 3008]*,**,* 0.00*,*02*,*H0*
*Y*,*x*,*N*,*Y*,*CAN/CSA-C191 SERIES-M90*,*CSA Standards on Performance of Electric Storage Tank Water Heaters [ID# 2812]*,**,* 62.00*,*02*,*I0*
*N*,*x*,*N*,*Y*,*CAN/CSA-C260-M90*,*Rating the Performance of Residential Mechanical Ventilating Equipment [ID# 2817]*,**,* 40.00*,*02*,*I0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-C273.3-M91*,*Performance Standard for Split-System Central Air-Conditioners and Heat Pumps (rp:07/91, 01/93) [ID# 2855]*,**,* 47.00*,*02*,*I0*
*N*,*e*,*N*,*Y*,*CAN/CSA-C273.3-FM91*,*Évaluation des performances des thermopompes biblocs et des climatiseurs centraux [ID# 4584]*,**,* 47.00*,*02*,*I0*
*Y*,*x*,*N*,*Y*,*C273.4-M1978 (R1992)*,*Performance Requirements for Electric Heating Line-Voltage Wall Thermostats (a:16) [ID# 1545]*,**,* 14.00*,*02*,*I0*
*N*,*x*,*N*,*Y*,*CAN/CSA-C300-M91*,*Capacity Measurement and Energy Consumption Test Methods for Refrigerators, Combination Refrigerator-Freezers, and Freezers [ID# 3101]*,**,* 84.00*,*02*,*I0*
*N*,*x*,*N*,*Y*,*CAN/CSA-C300-M89*,*Capacity Measurement and Energy Consumption Test Methods for Refrigerators, Combination Refrigerator-Freezers, and Household Freezers (rp:03/91,08/91) [ID# 2590]*,**,* 84.00*,*02*,*I0*
*N*,*x*,*N*,*Y*,*CAN/CSA-C309-M90*,*Performance Requirements for Glass-Lined Storage Tanks for Household Hot Water Service [ID# 2800]*,**,* 40.00*,*02*,*I0*
*N*,*f*,*N*,*Y*,*CAN/CSA-C358-M89*,*Energy Consumption Test Methods for Household Electric Ranges [ID# 2455]*,**,* 41.00*,*02*,*I0*
*N*,*e*,*N*,*Y*,*CAN/CSA-C358-FM89*,*Consommation d'énergie des cuisinières électrodomestiques: méthodes d'essai [ID# 2762]*,**,* 41.00*,*02*,*I0*
*N*,*x*,*N*,*Y*,*CAN/CSA-C360-92*,*Test Method for Measuring Energy Consumption and Capacity of Automatic Household Clothes Washers (rp:01/94) [ID# 3420]*,**,* 45.00*,*02*,*I0*
*N*,*x*,*N*,*Y*,*CAN/CSA-C361-92*,*Test Method for Measuring Energy Consumption and Drum Volume of Electrically Heated Household Tumble-Type Clothes Dryers [ID# 3465]*,**,* 38.00*,*02*,*I0*
*N*,*f*,*N*,*Y*,*CAN/CSA-C368.1-M90*,*Performance Standard for Room Air Conditioners [ID# 2715]*,**,* 36.00*,*02*,*I0*
*N*,*e*,*N*,*Y*,*CAN/CSA-C368.1-FM90*,*Norme sur les performances des conditionneurs d'air individuels [ID# 3192]*,**,* 36.00*,*02*,*I0*
*N*,*x*,*N*,*Y*,*CAN/CSA-C373-92*,*Energy Consumption Test Methods for Household Dishwashers [ID# 3386]*,**,* 36.00*,*02*,*I0*
*N*,*f*,*N*,*Y*,*CAN/CSA-C388-M89*,*Energy Consumption Test Methods for Household Microwave Ovens [ID# 2559]*,**,* 23.00*,*02*,*I0*
*N*,*e*,*N*,*Y*,*CAN/CSA-C388-FM89*,*Consommation d'énergie des fours à micro-ondes électroménagers: méthodes d'essai [ID# 2691]*,**,* 23.00*,*02*,*I0*
*N*,*x*,*N*,*Y*,*C390-93*,*Energy Efficiency Test Methods for Three-Phase Induction Motors [ID# 3987]*,**,* 43.00*,*02*,*I0*
*N*,*f*,*N*,*Y*,*CAN/CSA-C439-88*,*Standard Methods of Test for Rating the Performance of Heat-Recovery Ventilators [ID# 420]*,**,* 43.00*,*02*,*I0*
*N*,*e*,*N*,*Y*,*CAN/CSA-C439-F88*,*Méthodes d'essai pour l'évaluation des performances des échangeurs de chaleur [ID# 2643]*,**,* 43.00*,*02*,*I0*
*N*,*x*,*N*,*Y*,*C446-93*,*Performance of Ground and Water Source Heat Pumps [ID# 4356]*,**,* 39.00*,*02*,*I0*
*N*,*x*,*N*,*Y*,*CAN/CSA-C652-92*,*Installation of Electric Storage Tank Water Heaters for Residential Use [ID# 3537]*,**,* 32.00*,*02*,*I0*
*N*,*x*,*N*,*Y*,*CAN/CSA-C653-92*,*Performance Standard for Roadway Lighting Luminaires [ID# 3466]*,**,* 25.00*,*02*,*I0*
*N*,*e*,*N*,*Y*,*CAN/CSA-C654-FM91*,*Mesure du rendement des ballasts pour lampes fluorescentes [ID# 3355]*,**,* 50.00*,*02*,*I0*
*N*,*x*,*N*,*Y*,*CAN/CSA-C655-M91*,*Performance Standard for Internal Water-Loop Heat Pumps [ID# 2892]*,**,* 24.00*,*02*,*I0*
*N*,*f*,*N*,*Y*,*CAN/CSA-C656-M92*,*Performance Standard for Single Package Central Air-Conditioners and Heat Pumps [ID# 3300]*,**,* 40.00*,*02*,*I0*
*N*,*e*,*N*,*Y*,*CAN/CSA-C656-FM92*,*Évaluation des performances des thermopompes monoblocs et des climatiseurs centraux [ID# 3495]*,**,* 40.00*,*02*,*I0*
*N*,*x*,*N*,*Y*,*CAN/CSA-C742-93*,*Performance of Automatic Ice Makers and Ice Storage Bins [ID# 4358]*,**,* 32.00*,*02*,*I0*
*N*,*x*,*N*,*Y*,*C743-93*,*Performance Standard for Rating Packaged Water Chillers [ID# 3467]*,**,* 37.00*,*02*,*I0*
*N*,*x*,*N*,*Y*,*CSA-C744-93*,*Standard for Packaged Terminal Air-Conditioners and Heat Pumps (binational standard with ARI-310/380-93) [ID# 4359]*,**,* 27.00*,*02*,*I0*
*N*,*f*,*N*,*Y*,*CAN/CSA-C746-93*,*Performance Standard for Rating Large Air Conditioners and Heat Pumps [ID# 3468]*,**,* 40.00*,*02*,*I0*
*N*,*e*,*N*,*Y*,*CAN/CSA-C746-F93*,*Évaluation des performances des climatiseurs et des thermopompes de grande puissance [ID# 4595]*,**,* 40.00*,*02*,*I0*
*N*,*x*,*N*,*Y*,*C749-94*,*Performance of Dehumidifiers [ID# 4360]*,**,* 24.00*,*02*,*I0*
*Y*,*x*,*N*,*Y*,*C802-94*,*Maximum Losses for Distribution, Power, and Dry-Type Transformers [ID# 4361]*,**,* 27.00*,*02*,*I0*
*N*,*x*,*N*,*Y*,*ANSI/IES RP-7-1979*,*American National Standard Practice for Industrial Lighting (replaces CSA C92.1-1975) [ID# 46]*,**,* 0.00*,*02*,*I0*
*N*,*x*,*N*,*Y*,*DIR.005.1-94*,*Electrical Service Equipment, Wiring Hardware and Components [ID# 4585]*,**,* 30.00*,*02*,*J0*
*N*,*x*,*N*,*Y*,*DIR.005.1-1992*,*List of Certified Electrical Service Equipment, Wiring Hardware and Materials-- Volume I (rp:**INCLUDES SUPPLEMENT**) [ID# 3382]*,**,* 25.00*,*02*,*J0*
*N*,*x*,*N*,*Y*,*DIR.005.2-1992*,*List of Certified Electrically-Equipped Consumer, Commercial and Industrial Products--Volume II (rp:**INCLUDES SUPPLEMENT**) [ID# 3383]*,**,* 30.00*,*02*,*J0*
*N*,*x*,*N*,*Y*,*DIR.005.3-1992*,*List of Certified Electrical Equipment For Use in Hazardous Locations--Volume III (rp:**INCLUDES SUPPLEMENT**) [ID# 3384]*,**,* 20.00*,*02*,*J0*
*N*,*x*,*N*,*Y*,*DIR.005.3-94*,*Electrical Equipment for Use in Hazardous Locations [ID# 4587]*,**,* 20.00*,*02*,*J0*
*N*,*x*,*N*,*Y*,*DIR.005.4-1992*,*List of Certified Electrical Components and Accessories--Volume IV (rp:**INCLUDES SUPPLEMENT**) [ID# 3385]*,**,* 30.00*,*02*,*J0*
*N*,*x*,*N*,*Y*,*DIR.005.4-94*,*Home and Commercial Entertainment Products [ID# 4588]*,**,* 20.00*,*02*,*J0*
*N*,*x*,*N*,*Y*,*DIR.005.5-94*,*Lighting Equipment and Products [ID# 4589]*,**,* 20.00*,*02*,*J0*
*N*,*x*,*N*,*Y*,*DIR.005.6-94*,*Power Supplies and Transformers [ID# 4590]*,**,* 20.00*,*02*,*J0*
*N*,*x*,*N*,*Y*,*C22.3 NO. 5.1-93*,*Recommended Practices for Electrical Protection--Electric Contact Between Overhead Supply and Communication Lines [ID# 3629]*,**,* 63.00*,*02*,*J0*
*N*,*x*,*N*,*N*,*PKG.3302-92*,*File Transfer Access and Management (FTAM) Package (Consists of : CAN/CSA-Z243. 180-89, CAN/CSA-Z243.181-89, CAN/CSA-Z243.182-89, CAN/CSA-Z243.183-89, and CAN/CSA- Z243.184-92) [ID# 3529]*,**,* 241.00*,*03*,*A0*
*N*,*x*,*N*,*N*,*PKG.3304*,*High Level Data Link Control (HDLC) Package (Consists of: CAN/CSA-Z243.50-88, CAN/CSA-Z243.51-88, CAN/CSA-Z243.52-88, CAN/CSA-Z243.53-88, CAN/CSA-Z243.54-88, CAN/CSA-Z243.55-88, and CAN/CSA-Z243.56-88.) [ID# 2421]*,**,* 184.00*,*03*,*A0*
*N*,*f*,*N*,*Y*,*T500-1983 (R1992)*,*Videotex/Teletext Presentation Level Protocol Syntax (North American PLPS) [ID# 1965]*,**,* 29.00*,*03*,*A0*
*N*,*e*,*Y*,*Y*,*T500-F1983 (C1992)*,*Syntaxe du protocole de la couche présentation du vidéotex/télétexte (NAPLPS) [ID# 1963]*,**,* 29.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*T500S1-1991*,*Supplement No. 1-1991 to CSA Standard T500-1983, Videotex/Teletext Presentation Level Protocol Syntax (North American PLPS) [ID# 2872]*,**,* 24.00*,*03*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z243.4-87 (R1993)*,*7-Bit and 8-Bit Coded Character Sets for Information Processing and Interchange [ID# 494]*,**,* 47.00*,*03*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z243.4-F87*,*Jeux de caractères codés à 7 et à 8 éléments pour le traitement et l'échange d'information [ID# 493]*,**,* 47.00*,*03*,*A0*
*N*,*f*,*Y*,*Y*,*Z243.4.1-1992*,*Canadian Alphanumeric Ordering Standard for Character Sets of CSA Standard CAN/ CSA-Z243.4 [ID# 3121]*,**,* 37.00*,*03*,*A0*
*N*,*e*,*N*,*Y*,*Z243.4.1-F1992*,*Méthode canadienne de classement alphanumérique pour les jeux de caractères de la norme CAN/CSA-Z243.4 [ID# 3367]*,**,* 37.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*Z243.12.2-1981 (R1988)*,*Data Communication--15 Pin DTE/DCE Interface Connector and Pin Assignments (Adopted ISO 4903:1980, with modification) [ID# 2093]*,**,* 18.00*,*03*,*A0*
*N*,*x*,*N*,*N*,*Z243.18-1980 (R1992)*,*Programming Language FORTRAN (Adopted ANSI X3.9-1978) [ID# 2102]*,**,* 42.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*Z243.32-M1983 (R1992)*,*Formsets for Use with Embossed Cards and Imprinting Equipment [ID# 2116]*,**,* 24.00*,*03*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z243.39-90*,*Programming Language--COBOL (Adopted IDT ISO 1989:1985) [ID# 2804]*,**,* 11.00*,*03*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z243.39-F90*,*Langage de programmation COBOL (norme IDT ISO 1989:1985 adoptée) [ID# 2826]*,**,* 89.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*Z243.41-1980 (R1992)*,*Optical Character Recognition (OCR) Paper (Adopted ANSI X3.62-1979, with modification) [ID# 2132]*,**,* 18.00*,*03*,*A0*
*N*,*x*,*Y*,*Y*,*Z243.45-1988*,*Interlibrary Loan (ILL) Service Definition [ID# 2136]*,**,* 57.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.47-88*,*Information Processing Systems--Database Language SQL (Adopted ISO 9075:1987) [ID# 495]*,**,* 62.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*Z243.48-1992*,*Information Processing Systems--X25 DTE Conformance Testing (Adopted ISO 8882, Parts 1.2) [ID# 3151]*,**,* 20.00*,*03*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z243.50-88*,*Information Processing Systems--Data Communication--High--Level Data Link Control Procedures--Frame Structure (Adopted ISO 3309:1984) [ID# 2422]*,**,* 21.00*,*03*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z243.50-F88*,*Systèmes de traitement de l'information--Communication de données--Procédures de commande de liaison de données à haut niveau--Structure de trame (norme ISO 3309:1984 adoptée) [ID# 2464]*,**,* 21.00*,*03*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z243.51-88*,*Information Processing Systems--Data Communication--High--Level Data Link Control Elements of Procedures (Adopted ISO 4335:1987) [ID# 2423]*,**,* 53.00*,*03*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z243.51-F88*,*Systèmes de traitement de l'information--Communication de données--Éléments de procédures de commande de liaison de données à haut niveau (norme ISO 4335:1987 adoptée) [ID# 2461]*,**,* 53.00*,*03*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z243.52-F88*,*Systèmes de traitement de l'information--Communication de données--Procédures multiliaison (norme ISO 7478:1987 adoptée) [ID# 2525]*,**,* 27.00*,*03*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z243.53-88*,*Information Processing Systems--Data Communication--High-Level Data Link ControlProcedures--Description of the X.25 LAPB-Compatible DTE Data Link Procedures (Adopted ISO 7776:1986) [ID# 2425]*,**,* 40.00*,*03*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z243.53-F88*,*Systèmes de traitement de l'information--Communication de données--Procédures de commande de liaison de données à haut niveau--Description des procédures de liaison d'équipement terminal de transmission de données ETTD-Compatible X.25 LAPB (norme IS*,*O 7776:1986 adoptée) [ID# 2460]*,* 40.00*,*03*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z243.54-88*,*Information Processing Systems--Data Communication--High-Level Data Link Control Procedures--Consolidation of Classes of Procedures (Adopted ISO 7809:1984) [ID# 2426]*,**,* 34.00*,*03*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z243.54-F88*,*Systèmes de traitement de l'information--Téléinformatique--Procédures de commande de liaison de données à haut niveau--Consolidation des classes de procédures (norme ISO 7809:1984 adoptée) [ID# 2463]*,**,* 34.00*,*03*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z243.55-88*,*Information Processing Systems--Data Communication--High-Level Data Link Control Balanced Classes of Procedures--Data-Link Layer Address Resolution/Negotiation in Switched Environments (Adopted ISO 8471:1987) [ID# 2427]*,**,* 19.00*,*03*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z243.55-F88*,*Systèmes de traitement de l'information--Communication de données--Classes équilibrées de procédures de commande de liaison de données à haut niveau-- Détermination/négociation d'adresse de couche liaison de données en environnement*,*commuté (norme ISO 8471:1987 adoptée) [ID# 2462]*,* 19.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.56-88*,*Information Processing Systems--Data Communication--High-Level Data Link Control Procedures--General Purpose XID Frame Information Field Content and Format (Adopted ISO 8885:1987) [ID# 2428]*,**,* 23.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*Z243.57-1991*,*Canadian Vocabulary for Information Technology Security [ID# 3139]*,**,* 68.00*,*03*,*A0*
*N*,*b*,*N*,*Y*,*CAN/CSA-Z243.58-92*,* Information Technology Vocabulary/Vocabulaire des technologies de l'information (Bilingual Standard/norme bilingue) [ID# 3119]*,**,* 63.00*,*03*,*A0*
*N*,*f*,*N*,*Y*,*CAN3-Z243.100-86*,*Information Processing Systems--Open Systems Interconnection--Basic Reference Model (Adopted ISO 7498:1984) [ID# 899]*,**,* 27.00*,*03*,*A0*
*N*,*e*,*N*,*Y*,*CAN3-Z243.100-F86*,*Systèmes de traitement de l'information--Interconnexion de systèmes ouverts--Modèle de référence de base (norme ISO 7498:1984 adoptée) [ID# 898]*,**,* 27.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.100.2-92*,*Information Processing Systems--Open Systems Interconnection--Basic Reference Model--Part 2: Security Architecture (Adopted ISO 7498-2:1989) [ID# 3118]*,**,* 45.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.100.3-92*,*Information Processing Systems--Open Systems Interconnection--Basic Reference Model--Part 3: Naming and Addressing (Adopted ISO 7498-3:1989) [ID# 3157]*,**,* 39.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.101-89*,*Information Processing Systems--Open Systems Interconnection--Lotos--A Formal Description Technique Based On the Temporal Ordering of Observational Behaviour (Adopted ISO 8807:1989) [ID# 2580]*,**,* 76.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.102-90*,*Information Processing Systems--Open Systems Interconnection--Estelle--A Formal Description Technique Based on an Extended State Transition Model (Adopted ISO 9074:1989) [ID# 2752]*,**,* 108.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*Z243.110 SERIES-93*,*Canadian OSI Registration Procedures and Guidelines [ID# 3580]*,**,* 95.00*,*03*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z243.130-88*,*Information Processing Systems--Data Communications--Network Service Definition (Adopted ISO 8348:1987) [ID# 486]*,**,* 57.00*,*03*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z243.130-F88*,*Systèmes de traitement de l'information--Communications de données--Définition du service de réseau (norme ISO 8348:1987 adoptée) [ID# 2506]*,**,* 57.00*,*03*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z243.134-M88*,*Information Processing Systems--Open Systems Interconnection--Internal Organization of the Network Layer (Adopted ISO 8648:1988) [ID# 2290]*,**,* 41.00*,*03*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z243.134-FM88*,*Systèmes de traitement de l'information--Interconnexion de systèmes ouverts-- Organisation interne de la Couche Réseau (norme ISO 8648:1988 adoptée) [ID# 2788]*,**,* 41.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.135.1-91*,*Information Technology--Telecommunications and Information Exchange Between Systems--Protocol Combinations to Provide and Support the OSI Network Service-- Part 1: General Principles (Adopted ISO/IEC 8880-1:1990) [ID# 3140]*,**,* 16.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.135.2-91*,*Information Technology--Telecommunications and Information Exchange Between Systems--Protocol Combinations to Provide and Support the OSI Network Service-- Part 2: Provision and Support of the Connection--Mode Network Service (Adopted ISO/IEC 8880-2*,*:1990) [ID# 3141]*,* 12.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.135.3-91*,*Information Technology--Telecommunications and Information Exchange Between Systems--Protocol Combinations to Provide and Support the OSI Network Service-- Part 3: Provision and Support of the Connectionless-Mode Network Service (Adopted ISO/I*,*EC 8880-3:1990) [ID# 3142]*,* 18.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.136.2-M88*,*Information Processing Systems--Data Communications--Use of X.25 to Provide the OSI Connection--Mode Network Service (Adopted ISO 8878:1987) [ID# 2313]*,**,* 59.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.136.3-90*,*Information Processing Systems--Data Communications--Use of the X.25 Packet Level Protocol in Local Area Networks (Adopted ISO/IEC 8881:1989) [ID# 2749]*,**,* 23.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.137-92*,*Information Technology--Telecommunications and Information Exchange Between Systems--End System Routing Information Exchange Protocol for Use in Conjunction with ISO 8878 (Adopted ISO/IEC 10030:1990) [ID# 3256]*,**,* 30.00*,*03*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z243.140-87*,*Information Processing Systems--Open Systems Interconnection--Transport Service Definition (Adopted ISO 8072:1986) [ID# 488]*,**,* 26.00*,*03*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z243.140-F87*,*Systèmes de traitement de l'information--Interconnexion de systèmes ouverts--Service de transport en mode connexion (norme ISO 8072:1986 adoptée) [ID# 487]*,**,* 26.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.141-91*,*Information Technology--Open Systems Interconnection--Common Management Information Service Definition (Adopted ISO/IEC 9595:1991) [ID# 3143]*,**,* 43.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.142-91*,*Information Technology--Open Systems Interconnection--Common Management Information Protocol Specification (Adopted ISO/IEC 9596-1:1991) [ID# 3144]*,**,* 47.00*,*03*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z243.145-87*,*Information Processing Systems--Open Systems Interconnection--Connection Oriented Transport Protocol Specification (Adopted ISO 8073:1986) [ID# 490]*,**,* 71.00*,*03*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z243.145-F87*,*Systèmes de traitement de l'information--Interconnexion de systèmes ouverts-- Protocole de transport en mode connexion (norme ISO 8073:1986 adoptée) [ID# 489]*,**,* 71.00*,*03*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z243.150-88*,*Information Processing Systems--Open Systems Interconnection--Basic Connection Oriented Session Service Definition (Adopted ISO 8326:1987) [ID# 491]*,**,* 80.00*,*03*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z243.150-F88*,*Systèmes de traitement de l'information--Interconnexion de systèmes ouverts-- Service de session en mode connexion (norme ISO 8326:1986 adoptée) [ID# 2508]*,**,* 80.00*,*03*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z243.155-88*,*Information Processing Systems--Open Systems Interconnection--Basic Connection Oriented Session Protocol Specification (Adopted ISO 8327:1987) [ID# 492]*,**,* 104.00*,*03*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z243.155-F88*,*Systèmes de traitement de l'information--Interconnexion de systèmes ouverts-- Protocole de session en mode connexion (norme ISO 8327:1987 adoptée) [ID# 2504]*,**,* 104.00*,*03*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z243.160-89*,*Information Processing Systems--Open Systems Interconnection--Connection Oriented Presentation Service Definition (Adopted ISO 8822:1988) [ID# 2471]*,**,* 44.00*,*03*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z243.160-F89*,*Systèmes de traitement de l'information--Interconnexion de systèmes ouverts-- Définition du service de présentation en mode connexion (norme ISO 8822:1988 adoptée) [ID# 2789]*,**,* 44.00*,*03*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z243.161-89*,*Information Processing Systems--Open Systems Interconnection--Specification of Abstract Syntax Notation One (ASN.1) (Adopted ISO 8824:1987) [ID# 2414]*,**,* 56.00*,*03*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z243.161-F89*,*Systèmes de traitement de l'information--Interconnexion de systèmes ouverts-- Spécification de la notation de syntaxe abstraite numéro 1 (ASN.1) (norme ISO 8824:1987 adoptée) [ID# 2505]*,**,* 56.00*,*03*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z243.162-89*,*Information Processing Systems--Open Systems Interconnection--Specification of Basic Encoding Rules for Abstract Syntax Notation One (ASN.1) (Adopted ISO 8825:1987) [ID# 2415]*,**,* 34.00*,*03*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z243.162-F89*,*Systèmes de traitement de l'information--Interconnexion de systèmes ouverts-- Spécification des règles de codage de base pour la notation de syntaxe abstraite numéro 1 (ASN.1) (norme ISO 8825:1987 adoptée) [ID# 2499]*,**,* 34.00*,*03*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z243.165-89*,*Information Processing Systems--Open Systems Interconnection--Connection Oriented Presentation Protocol Specification (Adopted ISO 8823:1988) [ID# 2472]*,**,* 50.00*,*03*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z243.165-F89*,*Systèmes de traitement de l'information--Interconnexion de systèmes ouverts-- Spécification du protocole de présentation en mode connexion (norme ISO 8823: 1988 adoptée) [ID# 2790]*,**,* 50.00*,*03*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z243.170-89*,*Information Processing Systems--Open Systems Interconnection--Service Definition for the Association Control Service Element (Adopted ISO 8649:1988) [ID# 2532]*,**,* 26.00*,*03*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z243.170-F89*,*Systèmes de traitement de l'information--Interconnexion de systèmes ouverts-- Définition du service pour l'élément de service de contrôle d'association (norme ISO 8649:1988 adoptée) [ID# 2809]*,**,* 26.00*,*03*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z243.171-89*,*Information Processing Systems--Open Systems Interconnection--Protocol Specification for the Association Control Service Element (Adopted ISO 8650:1988) [ID# 2531]*,**,* 41.00*,*03*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z243.171-F89*,*Systèmes de traitement de l'information--Interconnexion de systèmes ouverts-- Spécification du protocole pour l'élément de service de contrôle d'association (norme ISO 8650:1988 adoptée) [ID# 2805]*,**,* 41.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.173-90*,*Information Processing Systems--Open Systems Interconnection--Job Transfer and Manipulation Concepts and Services (Adopted ISO 8831:1989) [ID# 2660]*,**,* 59.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.174-90*,*Information Processing Systems--Open Systems Interconnection--Specification of the Basic Class Protocol for Job Transfer and Manipulation (Adopted ISO 8832: 1989) [ID# 2659]*,**,* 56.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.175-91*,*Information Technology--Open Systems Interconnection--Virtual Terminal Basic Class Service (Adopted ISO 9040:1990) [ID# 3145]*,**,* 63.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.176-91*,*Information Technology--Open Systems Interconnection--Virtual Terminal Basic Class Protocol--Part 1: Specification (Adopted ISO 9041-1:1990) [ID# 3146]*,**,* 61.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.177.1-91*,*Information Technology--Open Systems Interconnection--The Directory, Part I: Overview of Concepts, Models and Services (Adopted ISO/IEC 9594-1:1990) [ID# 3060]*,**,* 25.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.177.2-91*,*Information Technology--Open Systems Interconnection--The Directory, Part II: Models (Adopted ISO/IEC 9594-2:1990) [ID# 3061]*,**,* 36.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.177.3-91*,*Information Technology--Open Systems Interconnection--The Directory, Part III: Abstract Service Definition (Adopted ISO/IEC 9594-3:1990) [ID# 3062]*,**,* 39.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.177.4-91*,*Information Technology--Open Systems Interconnection--The Directory, Part IV: Procedures for Distributed Operation (Adopted ISO/IEC 9594-4:1990) [ID# 3063]*,**,* 51.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.177.5-91*,*Information Technology--Open Systems Interconnection--The Directory, Part V: Protocol Specifications (Adopted ISO/IEC 9594-5:1990) [ID# 3064]*,**,* 25.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.177.6-91*,*Information Technology--Open Systems Interconnection--The Directory, Part VI: Selected Attribute Types (Adopted ISO/IEC 9594-6:1990) [ID# 3065]*,**,* 32.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.177.7-91*,*Information Technology--Open Systems Interconnection--The Directory, Part VII: Selected Object Classes (Adopted ISO/IEC 9594-7:1990) [ID# 3066]*,**,* 25.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.177.8-91*,*Information Technology--Open Systems Interconnection--The Directory, Part VIII: Authentication Framework (Adopted ISO/IEC 9594-8:1990) [ID# 3067]*,**,* 39.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.178-91*,*Information Technology--Open Systems Interconnection--Service Definition for the Commitment, Concurrency, and Recovery Service Element (Adopted ISO/IEC 9804:1990) [ID# 3147]*,**,* 52.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.179-91*,*Information Technology--Open Systems Interconnection--Protocol Specification for the Commitment, Concurrency and Recovery Service Element (Adopted ISO/IEC 9805:1990) [ID# 3148]*,**,* 47.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.180-89*,*Information Processing Systems--Open Systems Interconnection--File Transfer, Access and Management--Part 1: General Introduction (Adopted ISO 8571-1:1988) [ID# 2357]*,**,* 41.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.181-89*,*Information Processing Systems--Open Systems Interconnection--File Transfer, Access and Management--Part 2: Virtual Filestore Definition (Adopted ISO 8571-2: 1988) [ID# 2358]*,**,* 56.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.182-89*,*Information Processing Systems--Open Systems Interconnection--File Transfer, Access and Management--Part 3: File Service Definition (Adopted ISO 8571-3:1988) [ID# 2359]*,**,* 62.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.183-89*,*Information Processing Systems--Open Systems Interconnection--File Transfer, Access and Management--Part 4: File Protocol Specification (Adopted ISO 8571-4:1988) [ID# 2360]*,**,* 71.00*,*03*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z243.200-92*,*Canadian Keyboard Standard for English and French Languages [ID# 3196]*,**,* 43.00*,*03*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z243.200-F92*,*Claviers canadiens pour le français et l'anglais [ID# 3346]*,**,* 43.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.210-89*,*Information Processing--Text and Office Systems--Standard Generalized Markup Language (SGML), and SGML Support Facilities--SGML Document Interchange Format (SDIF) (Adopted ISO 8879:1986, 9069:1988) [ID# 2545]*,**,* 83.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.210.1-89*,*Information Processing--SGML Support Facilities--Techniques for Using SGML (Adopted ISO/IEC TR 9573:1988) [ID# 2634]*,**,* 76.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.221-90*,*Information Processing--Text and Office Systems--Office Document Architecture (ODA) and Interchange Format--Part 1: Introduction and General Principles (Adopted ISO 8613-1:1989) [ID# 2745]*,**,* 60.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.222-90*,*Information Processing--Text and Office Systems--Office Document Architecture (ODA) and Interchange Format--Part 2: Document Structures (Adopted ISO 8613-2: 1989) [ID# 2756]*,**,* 130.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.224-90*,*Information Processing--Text and Office Systems--Office Document Architecture (ODA) and Interchange Format--Part 4: Document Profile (Adopted ISO 8613-4:1989) [ID# 2754]*,**,* 43.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.225-90*,*Information Processing--Text and Office Systems--Office Document Architecture (ODA) and Interchange Format--Part 5: Office Document Interchange Format (ODIF) (Adopted ISO 8613-5:1989) [ID# 2743]*,**,* 84.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.226-90*,*Information Processing--Text and Office Systems--Office Document Architecture (ODA) and Interchange Format--Part 6: Character Content Architectures (Adopted ISO 8613-6:1989) [ID# 2753]*,**,* 84.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.227-90*,*Information Processing--Text and Office Systems--Office Document Architecture (ODA) and Interchange Format--Part 7: Raster Graphics Content Architectures (Adopted ISO 8613-7:1989) [ID# 2742]*,**,* 65.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z243.228-90*,*Information Processing--Text and Office Systems--Office Document Architecture (ODA) and Interchange Format--Part 8: Geometric Graphics Content Architectures (Adopted ISO 8613-8:1989) [ID# 2744]*,**,* 69.00*,*03*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z243.300-89*,*Electronic Data Interchange for Administration, Commerce, and Transport (EDIFACT)--Application Level Syntax Rules (Adopted ISO 9735:1988) [ID# 2567]*,**,* 32.00*,*03*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z243.300-F89*,*Échange de données informatisées pour l'administration, le commerce et le transport (EDIFACT)--Règles de syntaxe au niveau de l'application (norme ISO 9735:1988 adoptée) [ID# 2678]*,**,* 32.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*ANSI/MIL 1815A-1983*,*Reference Manual for the ADA Programming Language [ID# 48]*,**,* 0.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CCITT V.10*,*Electrical Characteristics for Unbalanced Double-Current Interchange Circuits for General use with Integrated Circuit Equipment in the Field of Data Communications [ID# 2918]*,**,* 0.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CCITT V.11*,*Electrical Characteristics for Balanced Double-Current Interchange Circuits for General use with Integrated Circuit Equipment in the Field of Data Communications [ID# 2919]*,**,* 0.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*CCITT X.21-1984*,*CCITT Recommendation X.21-1984, Recommendation Interface Between Data Terminal Equipment (DTE) and Data Circuit-Terminating Equipment (DCE) for Synchronous Operation on Public Data Networks [ID# 2920]*,**,* 0.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*ISO 962-1974*,*Information processing - Implementation of the 7-bit coded character set and its 7-bit and 8-bit extensions on 9-track l2.7mm (0.5 in) magnetic tape [ID# 1832]*,**,* 0.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*ISO 963-1973*,*Information processing - Guide for the definition of 4-bit character sets derived from the 7-bit coded character set for information processing interchange [ID# 1833]*,**,* 0.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*ISO 1177-1985*,*Information Processing-Character Structure for Start/Stop and Synchronous Character [ID# 1794]*,**,* 0.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*ISO 1745-1975*,*Information Processing - Basic Mode Control Procedures for Data Communication Systems [ID# 1800]*,**,* 0.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*ISO 2022-1986*,*Information processing - ISO 7-bit and 8-bit coded character sets - Code extension techniques [ID# 1802]*,**,* 0.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*ISO 2111-1985*,*Data Communication - Basic Mode Control Procedures - Code Independent Information Transfer [ID# 1803]*,**,* 0.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*ISO 2628-1973*,*Basic Mode Control Procedure-Complements [ID# 1804]*,**,* 0.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*ISO 2629-1973*,*Basic Mode Control Procedures - Conversational Information Message Transfer [ID# 1805]*,**,* 0.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*ISO 6593-1985*,*Information processing - Program flow for processing sequential files in terms of record group [ID# 1815]*,**,* 0.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*ISO TR7477-1985*,*Data Communication - Arrangements for DTE to DTF Physical Connection using V24 Interchange Circuits [ID# 1792]*,**,* 0.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*ISO 7480-1980*,*Information Processing - Start/Stop Transmission Signal Quality at DTE/DCE Interfaces [ID# 1818]*,**,* 0.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*ISO 7811-2:1985*,*Identification cards - Recording technique - Part 2: Magnetic stripe [ID# 1821]*,**,* 0.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*ISO 7811-3-1985*,*Identification cards - Recording technique - Part 3: Location of embossed character on ID-1 cards [ID# 1822]*,**,* 0.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*ISO 7811-4-1985*,*Identification cards - Recording technique - Part 4: Location of read-only magnetic tracks - Tracks 1 and 2 [ID# 1823]*,**,* 0.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*ISO 7811-5-1985*,*Identification cards - Recording technique - Part 5: Location of read-write magnetic track - Track 3 [ID# 1824]*,**,* 0.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*ISO 7812-1987*,*Identification cards - Numbering system and registration procedure for issuer identifiers [ID# 1825]*,**,* 0.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*ISO 8480-1987*,*Information processing - Data communication DTE/DCE interface back-up control operation using the 25 PIN connector [ID# 1829]*,**,* 0.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*ISO 8481-1986*,*Data Communication - DTE to DTE Physical Connection Using X.24 Interchange Circuits with DTE Providing Timing [ID# 1830]*,**,* 0.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*ISO 8482-1987*,*Information Processing Systems - Data Communication - Twisted Pair Multipoint Interconnections [ID# 1831]*,**,* 0.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*ISO 8651-1-1-1988*,*Information Processing Systems - Computer Graphics - Graphical Kernel System (GKS) Language Binding - Part I - Fortran [ID# 2922]*,**,* 0.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*ISO 8651/2-1988*,*Information Processing Systems - Computer Graphics - Graphical Kernel Systems (GKS) Language Binding - Part 2 - PASCAL [ID# 2482]*,**,* 0.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*TDCC 204*,*Motor - Shipment Information [ID# 2924]*,**,* 0.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*TDCC 207*,*Motor - Shipment Information for Export Declaration [ID# 2925]*,**,* 0.00*,*03*,*A0*
*N*,*x*,*N*,*Y*,*TDCC 210*,*Motor - Freight Details and Invoice [ID# 2926]*,**,* 0.00*,*03*,*A0*
*N*,*f*,*N*,*Y*,*CAN3-C108.3.1-M84 (R1993)*,*Limits and Measurement Methods of Electromagnetic Noise from AC Power Systems, 0.15-30 MHz [ID# 677]*,**,* 25.00*,*03*,*B0*
*N*,*e*,*N*,*Y*,*CAN3-C108.3.1-FM84 (C1993)*,*Valeurs limites et méthodes de mesure du bruit électomagnétique (0.15 à 30 MHz) produit par les réseaux de courant alternatif [ID# 676]*,**,* 25.00*,*03*,*B0*
*N*,*f*,*N*,*Y*,*CAN/CSA-C108.4-M92*,*Limits and Methods of Measurement of Radio Interference Characteristics of Vehicles, Motor Boats, and Spark-Ignited Engine-Driven Devices [ID# 3411]*,**,* 60.00*,*03*,*B0*
*N*,*e*,*N*,*Y*,*CAN/CSA-C108.4-FM92*,*Limites et méthodes de mesure des caractéristiques de perturbations électromagnétiques des appareils industriels, scientifiques et médicaux (ISM) à fréquence radioélectrique [ID# 4478]*,**,* 60.00*,*03*,*B0*
*N*,*f*,*N*,*Y*,*CAN/CSA-C108.6-M91*,*Limits and Methods of Measurement of Electromagnetic Disturbance Characteristics of Industrial, Scientific and Medical (ISM) Radio-Frequency Equipment (Adopted CISPR 11:1990) [ID# 3221]*,**,* 20.00*,*03*,*B0*
*N*,*e*,*N*,*Y*,*CAN/CSA-C108.6-FM91*,*Limites et méthodes de mesure des caractéristiques de perturbations électromagnétiques des appareils industriels, scientifiques et médicaux (ISM) à fréquence radioélectrique [ID# 4479]*,**,* 20.00*,*03*,*B0*
*N*,*f*,*N*,*Y*,*C108.8-M1983 (R1989)*,*Electromagnetic Emissions from Data Processing Equipment and Electronic Office Machines (a:5) [ID# 1032]*,**,* 23.00*,*03*,*B0*
*N*,*e*,*N*,*Y*,*C108.8-FM1983 (C1989)*,*Impulsions électromagnétiques produites par les matériels de traitement de l'information et de bureautique: valeurs limites et méthodes de mesure [ID# 1031]*,**,* 23.00*,*03*,*B0*
*N*,*f*,*N*,*Y*,*CAN/CSA-C108.9-M91*,*Sound and Television Broadcasting Receivers and Associated Equipment--Limits and Methods of Measurement of Immunity Characteristics [ID# 2816]*,**,* 79.00*,*03*,*B0*
*N*,*e*,*N*,*Y*,*CAN/CSA-C108.9-FM91*,*Résistance des radios, des téléviseurs et des appareils connexes aux perturbations électromagnétiques: valeurs limites et mesure [ID# 3202]*,**,* 79.00*,*03*,*B0*
*N*,*x*,*N*,*Y*,*CAN/CSA-T510-92*,*Performance and Compatibility Requirements for Telephone Sets [ID# 3339]*,**,* 70.00*,*03*,*C0*
*N*,*x*,*N*,*Y*,*CAN/CSA-T512-M91*,*Functional and Compatibility Requirements for Private Branch Exchange (PBX) Switching Equipment for Voiceband Applications [ID# 2829]*,**,* 110.00*,*03*,*C0*
*N*,*f*,*N*,*Y*,*CAN3-T515-M85 (R1992)*,*Requirements for Handset Telephones Intended for Use by the Hard of Hearing (rp:02/91) [ID# 856]*,**,* 30.00*,*03*,*C0*
*N*,*e*,*N*,*Y*,*CAN3-T515-FM85 (C1992)*,*Exigences relatives aux postes téléphoniques à combiné pour les malentendants [ID# 2516]*,**,* 30.00*,*03*,*C0*
*N*,*x*,*N*,*Y*,*CAN/CSA-T528-93*,*Design Guidelines for Administration of Telecommunications Infrastructure in Commercial Buildings (Adopted ANSI/EIA TIA 606, with modifications) [ID# 3470]*,**,* 61.00*,*03*,*C0*
*N*,*x*,*N*,*Y*,*CAN/CSA-T529-M91*,*Design Guidelines for Telecommunications Wiring Systems in Commercial Buildings [ID# 3133]*,**,* 58.00*,*03*,*C0*
*N*,*x*,*N*,*Y*,*CAN/CSA-T530-M90*,*Building Facilities, Design Guidelines for Telecommunications (rp:05/91) [ID# 2671]*,**,* 80.00*,*03*,*C0*
*N*,*x*,*N*,*Y*,*CAN/CSA-T531-M91*,*Acoustic-to-Digital and Digital-to-Acoustic Transmission Requirements for ISDN Terminals [ID# 3134]*,**,* 30.00*,*03*,*C0*
*N*,*x*,*N*,*Y*,*CAN/CSA-T541-90*,*Integrated Services Digital Network (ISDN)--Basic Access Interface for Use on Metallic Loops for Application on the Network Side of the NT (Layer 1 Specification) (Adopted ANSI T1.601-1989) [ID# 2682]*,**,* 49.00*,*03*,*C0*
*N*,*x*,*N*,*Y*,*CAN/CSA-T542-90*,*Integrated Services Digital Network (ISDN)--Data-Link Layer Signalling Specification for Application at the User-Network Interface (Adopted ANSI T1.602-1989) [ID# 2687]*,**,* 80.00*,*03*,*C0*
*N*,*x*,*N*,*Y*,*CAN/CSA-T543-91*,*Integrated Services Digital Network (ISDN)--Minimal Set of Bearer Services for the Primary Rate Interface (Adopted ANSI T1.603-1990) [ID# 2830]*,**,* 29.00*,*03*,*C0*
*N*,*x*,*N*,*Y*,*CAN/CSA-T544-91*,*Integrated Services Digital Network (ISDN)--Minimal Set of Bearer Services for the Basic Rate Interface (Adopted ANSI T1.604-1990) [ID# 2831]*,**,* 35.00*,*03*,*C0*
*N*,*x*,*N*,*Y*,*CAN/CSA-T545-90*,*Integrated Services Digital Network (ISDN)--Basic Access Interface for S and T Reference Points (Layer 1 Specification) (Adopted ANSI T1.605-1989) [ID# 2680]*,**,* 49.00*,*03*,*C0*
*N*,*x*,*N*,*Y*,*CAN/CSA-T552-M91*,*Integrated Services Digital Network (ISDN)--Terminal Adaptation Using Statistical Multiplexing (Adopted ANSI T1.612-1990) [ID# 3137]*,**,* 22.00*,*03*,*C0*
*N*,*x*,*N*,*N*,*PKG.9900*,*Summaries of all Construction and Electrical Standards Combined [ID# 4582]*,**,* 144.00*,*04*,*A0*
*N*,*x*,*N*,*N*,*PLUS 4000-93*,*Construction Plus: A Guide to CSA Construction Standards (Third Edition) [ID# 4173]*,**,* 85.00*,*04*,*A0*
*N*,*f*,*N*,*Y*,*CAN3-A31-M75 (R1981)*,*Series of Standards for Metric Dimensional Coordination in Building [ID# 559]*,**,* 19.00*,*04*,*A0*
*N*,*e*,*N*,*Y*,*CAN3-A31-FM75 (C1981)*,*Série de normes sur la coordination dimensionnelle métrique en bâtiment [ID# 558]*,**,* 19.00*,*04*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-A82.20 SERIES-M91*,*Methods of Testing Gypsum and Gypsum Products [ID# 3048]*,**,* 55.00*,*04*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-A82.20 SERIE-FM91*,*Méthodes d'essai relatives au gypse et aux produits à base de gypse [ID# 3348]*,**,* 55.00*,*04*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-A82.21-M91*,*Gypsum and Terms Relating to Gypsum Products [ID# 3031]*,**,* 19.00*,*04*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-A82.21-FM91*,*Terminologie relative au gypse et aux produits à base de gypse [ID# 3334]*,**,* 19.00*,*04*,*A0*
*N*,*x*,*N*,*Y*,*A123.3-M1979 (R1992)*,*Asphalt or Tar Saturated Roofing Felt (a:3) [ID# 60]*,**,* 16.00*,*04*,*A0*
*N*,*x*,*N*,*Y*,*A123.4-M1979 (R1992)*,*Bitumen for Use in Construction of Built-Up Roof Coverings and Dampproofing and Waterproofing Systems [ID# 61]*,**,* 16.00*,*04*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-A123.5-M90*,*Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules [ID# 2740]*,**,* 34.00*,*04*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-A123.5-FM90*,*Bardeaux d'asphalte en feutre de fibres de verre et à surfaçage minéral [ID# 3044]*,**,* 34.00*,*04*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-A123.16-FM88*,*Membranes-étanchéité bitumées et à base de fibres de verre [ID# 2645]*,**,* 41.00*,*04*,*A0*
*N*,*x*,*N*,*Y*,*A123.17-1963 (R1979) (R1992)*,*Asphalt-Saturated Felted Glass-Fibre Mat for Use in Construction of Built-Up Roofs (a:1) [ID# 58]*,**,* 14.00*,*04*,*A0*
*N*,*f*,*N*,*Y*,*CAN3-A123.51-M85 (R1992)*,*Asphalt Shingle Application on Roof Slopes 1:3 and Steeper (rp:01/88) [ID# 519]*,**,* 40.00*,*04*,*A0*
*N*,*e*,*N*,*Y*,*CAN3-A123.51-FM85 (C1992)*,*Pose de bardeaux d'asphalte sur des pentes de toit de 1:3 et plus (ps:01/88) [ID# 518]*,**,* 40.00*,*04*,*A0*
*N*,*f*,*N*,*Y*,*CAN3-A123.52-M85 (R1992)*,*Asphalt Shingle Application on Roof Slopes 1:6 to Less Than 1:3 (rp:01/88) [ID# 522]*,**,* 40.00*,*04*,*A0*
*N*,*e*,*N*,*Y*,*CAN3-A123.52-FM85 (C1992)*,*Pose de bardeaux d'asphalte sur des pentes de toit de 1:6 jusqu'à moins de 1:3 (ps:01/88) [ID# 521]*,**,* 40.00*,*04*,*A0*
*N*,*f*,*N*,*Y*,*A126.1-M1984*,*Vinyl Asbestos and Vinyl Composition Floor Tile [ID# 65]*,**,* 26.00*,*04*,*A0*
*N*,*e*,*N*,*Y*,*A126.1-FM1984*,*Carreaux vinyliques (avec ou sans amiante) [ID# 64]*,**,* 26.00*,*04*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-A440-M90/A440.1-M1990*,*Windows / User Selection Guide to CSA Standard CAN/CSA-A440-M90, Windows (rp:10/91) [ID# 2722]*,**,* 89.00*,*04*,*A0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-A440-FM90/A440.1-FM1990*,* Fenêtres / Guide de l'utilisateur de la norme CAN/CSA-A440-M90, Fenêtres (ps:10/91) [ID# 3070]*,**,* 89.00*,*04*,*A0*
*N*,*x*,*N*,*Y*,*A440.2-93/A440.3-93*,*Energy Performance Evaluation of Windows and Sliding Glass Doors User Guide to CSA Standard A440.2-93, Energy Performance Evaluation of Windows and Sliding Glass Doors [ID# 3602]*,**,* 84.00*,*04*,*A0*
*N*,*f*,*N*,*Y*,*A14-M1979*,*Concrete Poles [ID# 79]*,**,* 16.00*,*04*,*B0*
*N*,*e*,*N*,*Y*,*A14-FM1979*,*Poteaux en béton [ID# 78]*,**,* 16.00*,*04*,*B0*
*N*,*f*,*N*,*Y*,*CAN/CSA-A23.1/A23.2-M90*,*Concrete Materials and Methods of Concrete Construction/ Methods of Test for Concrete (rp:10/92) [ID# 2652]*,**,* 89.00*,*04*,*B0*
*N*,*e*,*N*,*Y*,*CAN/CSA-A23.1/A23.2-FM90*,*Béton--Constituants et exécution des travaux/ Essais concernant le béton (ps:10/92) [ID# 2712]*,**,* 89.00*,*04*,*B0*
*N*,*x*,*N*,*Y*,*A23.4-93*,*Precast Concrete - Materials and Construction [ID# 4367]*,**,* 41.00*,*04*,*B0*
*N*,*e*,*N*,*Y*,*CAN3-A231.2-FM85*,*Pavés de béton préfabriqués [ID# 546]*,**,* 34.00*,*04*,*B0*
*Y*,*f*,*N*,*Y*,*A251-M1982*,*Qualification Code for Manufacturers of Architectural and Structural Precast Concrete [ID# 99]*,**,* 30.00*,*04*,*B0*
*Y*,*e*,*N*,*Y*,*A251-FM1982*,*Règles de qualification pour fabricants de béton architectural et de béton structural préfabriqués [ID# 98]*,**,* 30.00*,*04*,*B0*
*N*,*f*,*N*,*Y*,*CAN/CSA-A257 SERIES-M92*,*Standards for Concrete Pipe [ID# 3170]*,**,* 73.00*,*04*,*B0*
*N*,*e*,*N*,*Y*,*CAN/CSA-A257 SERIE-FM92*,*Normes sur les tuyaux en béton [ID# 3379]*,**,* 73.00*,*04*,*B0*
*N*,*f*,*N*,*Y*,*CAN3-A266.1-M78*,*Air-Entraining Admixtures for Concrete (a:2) [ID# 549]*,**,* 14.00*,*04*,*B0*
*N*,*e*,*N*,*Y*,*CAN3-A266.1-FM78*,*Entraîneurs d'air pour le béton [ID# 548]*,**,* 14.00*,*04*,*B0*
*N*,*e*,*N*,*Y*,*CAN3-A266.2-FM78*,*Adjuvants chimiques du béton [ID# 550]*,**,* 14.00*,*04*,*B0*
*N*,*f*,*N*,*Y*,*CAN3-A266.4-M78*,*Guidelines for the Use of Admixtures in Concrete (a:11) (e:1) [ID# 553]*,**,* 14.00*,*04*,*B0*
*N*,*e*,*N*,*Y*,*CAN3-A266.4-FM78*,*Guide pour l'utilisation des adjuvants du béton (a:11) [ID# 552]*,**,* 14.00*,*04*,*B0*
*N*,*x*,*Y*,*Y*,*A266.5-M1981*,*Guidelines for the Use of Superplasticizing Admixtures in Concrete [ID# 103]*,**,* 14.00*,*04*,*B0*
*N*,*f*,*N*,*Y*,*CAN3-A266.6-M85*,*Superplasticizing Admixtures for Concrete [ID# 555]*,**,* 24.00*,*04*,*B0*
*N*,*e*,*N*,*Y*,*CAN3-A266.6-FM85*,*Superplastifiants pour le béton [ID# 554]*,**,* 24.00*,*04*,*B0*
*Y*,*e*,*N*,*Y*,*A283-F1980*,*Code de qualification des laboratoires d'essai du béton (e:1) (ps:03/89) [ID# 109]*,**,* 17.00*,*04*,*B0*
*Y*,*f*,*N*,*Y*,*A283S1-1987*,*Supplement No. 1 to A283-1980, Qualification Code for Concrete Testing Laboratories [ID# 112]*,**,* 25.00*,*04*,*B0*
*Y*,*e*,*N*,*Y*,*A283S1-F1987*,*Supplément no 1 à la norme ACNOR A283-1980, Code de qualification des laboratoires d'essai du béton [ID# 2297]*,**,* 25.00*,*04*,*B0*
*N*,*f*,*N*,*Y*,*CAN3-A438-M84*,*Concrete Construction for Housing and Small Buildings [ID# 570]*,**,* 27.00*,*04*,*B0*
*N*,*e*,*N*,*Y*,*CAN3-A438-FM84*,*Travaux de béton pour maisons et petits bâtiments [ID# 569]*,**,* 27.00*,*04*,*B0*
*N*,*x*,*N*,*Y*,*DIR.007-1993*,*List of CSA Certified Precast Concrete Plants [ID# 3684]*,**,* 0.00*,*04*,*B0*
*Y*,*x*,*N*,*Y*,*DIR.011-1993*,*List of CSA Certified Concrete Testing Laboratories [ID# 3630]*,**,* 0.00*,*04*,*B0*
*N*,*x*,*N*,*N*,*MISC.018-1980*,*Guidebook on Certification of Concrete Testing Laboratories [ID# 1840]*,**,* 25.00*,*04*,*B0*
*N*,*x*,*N*,*Y*,*S448.1-93*,*Repair of Reinforced Concrete in Buildings [ID# 4420]*,**,* 53.00*,*04*,*B0*
*N*,*f*,*N*,*Y*,*CAN/CSA-A82.1-M87 (R1992)*,*Burned Clay Brick (Solid Masonry Units Made from Clay or Shale) [ID# 394]*,**,* 26.00*,*04*,*C0*
*N*,*e*,*N*,*Y*,*CAN/CSA-A82.1-FM87 (C1992)*,*Briques d'argile cuites (éléments de maçonnerie pleins en argile ou en schiste) [ID# 393]*,**,* 26.00*,*04*,*C0*
*N*,*f*,*N*,*Y*,*CAN3-A82.2-M78 (R1984) (R1992)*,*Methods of Sampling and Testing Brick [ID# 588]*,**,* 18.00*,*04*,*C0*
*N*,*e*,*N*,*Y*,*CAN3-A82.2-FM78 (C1984) (C1992)*,*Méthodes d'échantillonnage et d'essai de la brique [ID# 586]*,**,* 18.00*,*04*,*C0*
*N*,*x*,*N*,*Y*,*A82.3-M1978 (R1984) (R1992)*,*Calcium Silicate (Sand-Lime) Building Brick [ID# 140]*,**,* 14.00*,*04*,*C0*
*N*,*x*,*N*,*Y*,*A82.4/A82.5/A82.6-M1978 (R1984) (R1992)*,*Structural Clay Load-Bearing Wall Tile/ Structural Clay Non-Load-Bearing Tile/ Standard Methods for Sampling and Testing Structural Clay Tile [ID# 147]*,**,* 14.00*,*04*,*C0*
*N*,*e*,*N*,*Y*,*CAN/CSA-O122-FM89*,*Éléments de charpente en bois lamellé-collé [ID# 2784]*,**,* 51.00*,*04*,*D0*
*N*,*x*,*N*,*Y*,*O124-1957 (R1972)*,*Specification for the Physical Properties of Power and Communication Wood Insulator Pins (a:1) (e:2) [ID# 1864]*,**,* 14.00*,*04*,*D0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-O177-M89*,*Qualification Code for Manufacturers of Structural Glued-Laminated Timber [ID# 2546]*,**,* 51.00*,*04*,*D0*
*N*,*e*,*N*,*Y*,*CAN/CSA-O177-FM89*,*Règles de qualification des fabricants d'éléments de charpente lamellés-collés [ID# 3407]*,**,* 51.00*,*04*,*D0*
*N*,*f*,*N*,*Y*,*CAN3-O188.0-M78*,*Standard Test Methods for Mat-Formed Wood Particleboards and Waferboard (a:3) [ID# 793]*,**,* 14.00*,*04*,*D0*
*N*,*e*,*N*,*Y*,*CAN3-O188.0-FM78*,*Méthodes d'essai normalisées destinées aux panneaux de particules de bois agglomérées sous presse et aux panneaux gaufrés [ID# 792]*,**,* 14.00*,*04*,*D0*
*N*,*e*,*N*,*Y*,*CAN3-O188.3-FM82*,*Panneaux de particules de bois agglomérées sous presse d'extérieur [ID# 798]*,**,* 19.00*,*04*,*D0*
*N*,*f*,*N*,*Y*,*CAN3-O302.1/O302.2-M86*,*Scaling Roundwood/ Measurement of Woodchips, Tree Residues, and Byproducts (rp:03/92) [ID# 803]*,**,* 25.00*,*04*,*D0*
*N*,*e*,*N*,*Y*,*CAN3-O302.1/O302.2-FM86*,*Cubage des bois ronds/ Cubage des copeaux, résidus et déchets de bois (ps:03/92) [ID# 802]*,**,* 25.00*,*04*,*D0*
*N*,*f*,*N*,*Y*,*O322-1976*,*Procedure for Certification of Pressure-Treated Wood Materials for Use in Preserved Wood Foundations (a:4) [ID# 1880]*,**,* 17.00*,*04*,*D0*
*N*,*e*,*N*,*Y*,*O322-F1976*,*Procédure de certification des matériaux en bois traité sous pression destinés aux fondations [ID# 2441]*,**,* 17.00*,*04*,*D0*
*N*,*e*,*N*,*Y*,*CAN/CSA-O325.0-F92*,*Revêtements intermédiaires de construction [ID# 3735]*,**,* 55.00*,*04*,*D0*
*N*,*f*,*N*,*Y*,*CAN/CSA-O325.1-88*,*Test Methods for Construction Sheathing (rp:10/92) [ID# 445]*,**,* 56.00*,*04*,*D0*
*N*,*e*,*N*,*Y*,*CAN/CSA-O325.1-F88*,*Méthodes d'essai des revêtements intermédiaires de construction [ID# 2565]*,**,* 56.00*,*04*,*D0*
*N*,*x*,*N*,*Y*,*CAN/CSA-O325.1S1-92*,*Supplement No. 1-92 to CAN/CSA-O325.1-88 Test Methods for Construction Sheathing [ID# 3451]*,**,* 20.00*,*04*,*D0*
*N*,*x*,*Y*,*Y*,*O325.2-M1990*,*Quality Assurance for Construction Sheathing [ID# 2623]*,**,* 28.00*,*04*,*D0*
*N*,*x*,*N*,*Y*,*O414-M1986*,*Manual of Terms and Definitions Recommended for Use in CSA Wood Standards [ID# 1881]*,**,* 27.00*,*04*,*D0*
*N*,*x*,*N*,*Y*,*O437 SERIES-93*,*Standards on OSB and Waferboard [ID# 3625]*,**,* 74.00*,*04*,*D0*
*N*,*x*,*N*,*Y*,*ASSE SERIES 5000-1991*,*Series 5000, Backflow Prevention Assemblies--Standards Program [ID# 3317]*,**,* 33.00*,*04*,*E0*
*N*,*x*,*N*,*N*,*DIR.004-1993*,*List of Certified Plumbing Products [ID# 4040]*,**,* 20.00*,*04*,*E0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-B64 SERIES-FM88*,*Dispositifs antirefoulement et casse-vide (y compris la norm CAN/CSA-B64.10-M88 sur le choix, l'installation, l'entretien et les essais à pied d'oeuvre) (e:3) (ps:03/92) [ID# 2657]*,**,* 71.00*,*04*,*E0*
*Y*,*x*,*N*,*Y*,*CAN/CSA-B66-M90*,*Prefabricated Septic Tanks and Sewage Holding Tanks [ID# 2760]*,**,* 42.00*,*04*,*E0*
*Y*,*f*,*N*,*Y*,*B67-1972*,*Lead Service Pipe, Waste Pipe, Traps, Bends and Accessories (a:2) [ID# 363]*,**,* 14.00*,*04*,*E0*
*Y*,*e*,*N*,*Y*,*B67-F1972*,*Tuyaux de distribution d'eau, tuyaux de renvoi, siphons, coudes et accessoires, en plomb [ID# 362]*,**,* 14.00*,*04*,*E0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-B70-M91*,*Cast Iron Soil Pipe, Fittings, and Means of Joining [ID# 3049]*,**,* 29.00*,*04*,*E0*
*N*,*e*,*N*,*Y*,*CAN/CSA-B70-FM91*,*Tuyaux et raccords d'évacuation d'eaux usées en fonte et méthodes de raccordement [ID# 3243]*,**,* 29.00*,*04*,*E0*
*Y*,*f*,*N*,*Y*,*CAN3-B79-M79*,*Floor Drains and Trench Drains [ID# 673]*,**,* 17.00*,*04*,*E0*
*Y*,*e*,*N*,*Y*,*CAN3-B79-FM79*,*Renvois de plancher et drains de bâtiment [ID# 672]*,**,* 17.00*,*04*,*E0*
*Y*,*x*,*N*,*Y*,*B127.1-M1977*,*Components for Use in Asbestos Cement Drain, Waste and Vent Systems (a:12) [ID# 161]*,**,* 15.00*,*04*,*E0*
*Y*,*x*,*N*,*Y*,*B127.2-M1977*,*Components for Use in Asbestos Cement Building Sewer Systems [ID# 164]*,**,* 14.00*,*04*,*E0*
*N*,*x*,*N*,*Y*,*B127.11-M1982*,*Recommended Practice for the Installation of Asbestos Cement Drain, Waste, and Vent Pipe and Pipe Fittings [ID# 163]*,**,* 18.00*,*04*,*E0*
*N*,*x*,*N*,*Y*,*B137.0-93*,*Definitions, General Requirements, and Methods of Testing for Thermoplastic Pressure Piping [ID# 4455]*,**,* 42.00*,*04*,*E0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-B137.1-M89*,*Polyethylene Pipe, Tubing and Fittings for Cold Water Pressure Services (rp:12/90, 07/92) [ID# 2595]*,**,* 41.00*,*04*,*E0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-B137.1-FM89*,*Tuyaux, tubes et raccords en polyéthylène pour réseaux de distribution d'eau froide [ID# 3172]*,**,* 41.00*,*04*,*E0*
*N*,*x*,*N*,*Y*,*B137.2-93*,*PVC Injection-Moulded Gasketed Fittings for Pressure Applications [ID# 4456]*,**,* 34.00*,*04*,*E0*
*Y*,*x*,*N*,*Y*,*CAN/CSA-B137.4-92*,*Polyethylene Piping Systems for Gas Services [ID# 3452]*,**,* 50.00*,*04*,*E0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-B137.4.1-M89*,*Electrofusion-Type Polyethylene Fittings for Gas Services [ID# 2502]*,**,* 32.00*,*04*,*E0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-B137.4.1-FM89*,*Raccords en polyéthylène à souder par électrofusion, pour conduites de gaz combustibles [ID# 2725]*,**,* 32.00*,*04*,*E0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-B137.5-M89*,*Cross-linked Polyethylene (PEX) Tubing Systems for Pressure Applications (rp:07/92, 07/93) [ID# 2553]*,**,* 36.00*,*04*,*E0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-B137.5-FM89*,*Tubes et raccords en polyéthylène réticulé (PEX) pour conduites sous pression [ID# 3019]*,**,* 36.00*,*04*,*E0*
*Y*,*f*,*N*,*Y*,*B137.6-M1983 (R1992)*,*CPVC Pipe, Tubing, and Fittings for Hot and Cold Water Distribution Systems (rp:05/86) [ID# 181]*,**,* 25.00*,*04*,*E0*
*Y*,*e*,*N*,*Y*,*B137.6-FM1983 (C1992)*,*Tuyaux, tubes et raccords en poly(chlorure de vinyle) chloré (CPVC) pour réseaux de distribution d'eau chaude et d'eau froide (ps:09/84, 05/86) [ID# 179]*,**,* 25.00*,*04*,*E0*
*Y*,*x*,*N*,*Y*,*B137.7-M1983*,*Polybutylene (PB) Pipe for Cold Water Distribution Systems [ID# 183]*,**,* 21.00*,*04*,*E0*
*N*,*f*,*N*,*Y*,*CAN/CSA-B137.8-M92*,*Polybutylene (PB) Piping for Pressure Applications (rp:07/92) [ID# 3298]*,**,* 39.00*,*04*,*E0*
*N*,*e*,*N*,*Y*,*CAN/CSA-B137.8-FM92*,*Tuyaux, tubes et raccords en polybutylène (PB) pour conduites d'eau sous pression [ID# 3477]*,**,* 39.00*,*04*,*E0*
*N*,*f*,*N*,*Y*,*CAN/CSA-B137.9-M91*,*Polyethylene/Aluminum/Polyethylene Composite Pressure Pipe Systems [ID# 2885]*,**,* 33.00*,*04*,*E0*
*N*,*e*,*N*,*Y*,*CAN/CSA-B137.9-FM91*,*Tuyaux et raccords sous pression en matériaux composites polyéthylène-aluminium -polyéthylène [ID# 3559]*,**,* 33.00*,*04*,*E0*
*N*,*x*,*N*,*Y*,*CAN/CSA-B137.10-M91*,*Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe Systems [ID# 2888]*,**,* 33.00*,*04*,*E0*
*N*,*f*,*N*,*Y*,*B137.11-93*,*Polypropylene (PP-R) Pipe and Fittings for Pressure Applications [ID# 3579]*,**,* 47.00*,*04*,*E0*
*N*,*e*,*N*,*Y*,*B137.11-F93*,*Tuyaux et raccords en polypropylène (PP-R) pour conduites d'eau sous pression [ID# 4514]*,**,* 47.00*,*04*,*E0*
*N*,*x*,*N*,*Y*,*B137.16-M1983 (R1992)*,*Recommended Practice for the Installation of CPVC Piping for Hot and Cold Water Distribution Systems [ID# 176]*,**,* 21.00*,*04*,*E0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-B182.2-FM90*,*Tuyaux et raccords d'égout en PVC (type PSM) [ID# 3322]*,**,* 54.00*,*04*,*E0*
*N*,*f*,*N*,*Y*,*CAN/CSA-B182.4-92*,*Profile PVC Sewer Pipe and Fittings [ID# 3370]*,**,* 46.00*,*04*,*E0*
*N*,*e*,*N*,*Y*,*CAN/CSA-B182.4-F92*,*Tuyaux d'égout à paroi profilée et raccords en PVC [ID# 4515]*,**,* 46.00*,*04*,*E0*
*N*,*x*,*N*,*Y*,*CAN/CSA-B182.6-M92*,*Profile Polyethylene Sewer Pipe and Fittings [ID# 3269]*,**,* 35.00*,*04*,*E0*
*N*,*x*,*N*,*Y*,*B182.11-1967*,*Recommended Practice for the Installation of Plastic Drain and Sewer Pipe and Pipe Fittings (a:1) [ID# 260]*,**,* 14.00*,*04*,*E0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-Z240 SERIE VC-FM86 (C1992)*,*Véhicules de camping (ps: 09/84) [ID# 485]*,**,* 65.00*,*04*,*F0*
*N*,*f*,*N*,*Y*,*Z240.7.1-1972*,*Mobile Home Parks (a:9) [ID# 2082]*,**,* 14.00*,*04*,*F0*
*N*,*e*,*N*,*Y*,*Z240.7.1-F1972*,*Parcs pour maisons mobiles [ID# 2081]*,**,* 14.00*,*04*,*F0*
*N*,*f*,*N*,*Y*,*Z240.7.2-1972*,*Recreational Vehicle Parks [ID# 2084]*,**,* 14.00*,*04*,*F0*
*N*,*e*,*N*,*Y*,*Z240.7.2-F1972*,*Parcs pour véhicules récréatifs [ID# 2083]*,**,* 14.00*,*04*,*F0*
*N*,*x*,*N*,*Y*,*Z240.10.1-93*,*Site Preparation, Foundation, and Anchorage of Mobile Homes [ID# 4463]*,**,* 41.00*,*04*,*F0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z241 SERIES-92*,*Park Model Trailers [ID# 3400]*,**,* 80.00*,*04*,*F0*
*N*,*x*,*N*,*N*,*PLUS 4001*,*Specifications for Steel: ASTM Standards Referenced in CSA's CAN/CSA-S16.1-M89 [ID# 2668]*,**,* 65.00*,*04*,*G0*
*N*,*x*,*N*,*N*,*PLUS 4002*,*Specifications for Cold Formed Steel Structural Members (Consists of all ASTM Standards referenced in CSA's-CAN/CSA-S136-M89.) [ID# 3075]*,**,* 58.00*,*04*,*G0*
*N*,*f*,*N*,*Y*,*CAN3-A23.3-M84*,*Design of Concrete Structures for Buildings (a:16) (e:15) [ID# 539]*,**,* 38.00*,*04*,*G0*
*N*,*e*,*N*,*Y*,*CAN3-A23.3-FM84*,*Calcul des ouvrages en béton dans les bâtiments (a:16) (e:13) [ID# 537]*,**,* 38.00*,*04*,*G0*
*N*,*e*,*N*,*Y*,*CAN3-O86-FM84 (C1992)*,*Règles de calcul aux contraintes admissibles des charpentes en bois [ID# 814]*,**,* 42.00*,*04*,*G0*
*N*,*f*,*N*,*Y*,*CAN3-O86S1/O86.1S1-87*,*Supplement No.1-1987 to CAN3-O86-M84, Engineering Design in Wood (Working Stress Design), and CAN3-O86.1-M84, Engineering Design in Wood (Limit States Design) [ID# 820]*,**,* 21.00*,*04*,*G0*
*N*,*e*,*N*,*Y*,*CAN3-O86S1/O86.1S1-F87*,*Supplément no 1-1987 aux normes ACNOR CAN3-O86-FM84, Règles de calcul aux contraintes admissibles des charpentes en bois, et CAN3-O86.1-M84, Règles de calcul aux états limites des charpentes en bois [ID# 819]*,**,* 21.00*,*04*,*G0*
*N*,*f*,*N*,*Y*,*CAN/CSA-O86.1-M89*,*Engineering Design in Wood (Limit States Design) (e:1) (rp:05/91) [ID# 2622]*,**,* 61.00*,*04*,*G0*
*N*,*e*,*N*,*Y*,*CAN/CSA-O86.1-FM89*,*Règles de calcul aux états limites des charpentes en bois (Note: The 1984 edition of the Standard is available on request for $42 per copy./ L'édition 1984 est disponible sur demande au prix unitaire de 42$.) (ps:05/91) [ID# 2863]*,**,* 61.00*,*04*,*G0*
*N*,*x*,*N*,*Y*,*O86.1.1-1992*,*Commentary on CSA Standard CAN/CSA-O86.1-M89, Engineering Design in Wood (Limit States Design) [ID# 3399]*,**,* 30.00*,*04*,*G0*
*N*,*x*,*N*,*Y*,*CAN/CSA-O86.1S1-93*,*Supplement No. 1-93 to CAN/CSA-O86.1-M89, Engineering Design in Wood (Limit States Design) [ID# 3857]*,**,* 26.00*,*04*,*G0*
*N*,*f*,*N*,*Y*,*CAN/CSA-S6-88*,*Design of Highway Bridges (rp:02/90) [ID# 2263]*,**,* 75.00*,*04*,*G0*
*N*,*e*,*N*,*Y*,*CAN/CSA-S6-F88*,*Calcul des ponts-routes (ps:08/90) [ID# 2703]*,**,* 75.00*,*04*,*G0*
*N*,*f*,*N*,*Y*,*CAN/CSA-S6S1-1990*,*Supplement No. 1-1990, Existing Bridge Evaluation, to CSA Standard CAN/CSA-S6- 88, Design of Highway Bridges [ID# 2624]*,**,* 39.00*,*04*,*G0*
*N*,*e*,*N*,*Y*,*CAN/CSA-S6S1-F1990*,*Supplement no 1-1990, Évaluation des ponts existants à conformément à la norme CAN/CSA-S6-88, Calcul des ponts-routes [ID# 3347]*,**,* 39.00*,*04*,*G0*
*N*,*x*,*N*,*Y*,*S6.1-M1990*,*Commentary on CSA Standard CAN/CSA-S6-88, Design of Highway Bridges [ID# 2625]*,**,* 39.00*,*04*,*G0*
*N*,*x*,*N*,*Y*,*S16.1.1-1992*,*Commentary on CSA Standard CAN/CSA-S16.1-M89, Limits States Design on Steel Structures [ID# 3402]*,**,* 30.00*,*04*,*G0*
*N*,*f*,*N*,*Y*,*CAN/CSA-S16.1-M89*,*Limit States Design of Steel Structures [ID# 2607]*,**,* 71.00*,*04*,*G0*
*N*,*e*,*N*,*Y*,*CAN/CSA-S16.1-FM89*,*Règles de calcul aux états limites des charpentes en acier [ID# 3071]*,**,* 71.00*,*04*,*G0*
*N*,*f*,*N*,*Y*,*CAN/CSA-S37-M86*,*Antennas, Towers, and Antenna-Supporting Structures (a:15) [ID# 453]*,**,* 47.00*,*04*,*G0*
*N*,*e*,*N*,*Y*,*CAN/CSA-S37-FM86*,*Antennes, pylônes et supports d'antenne (a:15) [ID# 452]*,**,* 47.00*,*04*,*G0*
*N*,*f*,*N*,*Y*,*CAN/CSA-S136-M89*,*Cold Formed Steel Structural Members (rp:12/90) [ID# 2608]*,**,* 61.00*,*04*,*G0*
*N*,*e*,*N*,*Y*,*CAN/CSA-S136-FM89*,*Éléments de charpente en acier formés à froid [ID# 3186]*,**,* 61.00*,*04*,*G0*
*N*,*x*,*N*,*Y*,*S136.1-M1991*,*Commentary on CAN/CSA-S136-M89, Cold Formed Steel Structural Members [ID# 2864]*,**,* 78.00*,*04*,*G0*
*N*,*f*,*N*,*Y*,*CAN3-S157-M83*,*Strength Design in Aluminum (e:5) [ID# 827]*,**,* 36.00*,*04*,*G0*
*N*,*e*,*N*,*Y*,*CAN3-S157-FM83*,*Calcul de la résistance mécanique des éléments en aluminium [ID# 826]*,**,* 36.00*,*04*,*G0*
*N*,*x*,*N*,*Y*,*S269.1-1975*,*Falsework for Construction Purposes [ID# 1952]*,**,* 15.00*,*04*,*G0*
*N*,*f*,*N*,*Y*,*CAN/CSA-S269.2-M87*,*Access Scaffolding for Construction Purposes [ID# 451]*,**,* 47.00*,*04*,*G0*
*N*,*f*,*N*,*Y*,*CAN3-S304-M84*,*Masonry Design for Buildings (a:18) [ID# 839]*,**,* 42.00*,*04*,*G0*
*N*,*e*,*N*,*Y*,*CAN3-S304-FM84*,*Calcul de la maçonnerie pour les bâtiments (e:18) (ps:11/91) [ID# 837]*,**,* 42.00*,*04*,*G0*
*N*,*x*,*N*,*Y*,*CAN/CSA-S304.1-93*,*Masonry Design for Buildings (Limit States Design) [ID# 4419]*,**,* 60.00*,*04*,*G0*
*Y*,*x*,*N*,*Y*,*S307-M1980 (R1992)*,*Load Test Procedure for Wood Roof Trusses for Houses and Small Buildings (rp:11/83) [ID# 1956]*,**,* 17.00*,*04*,*G0*
*N*,*x*,*N*,*Y*,*S347-M1980 (R1992)*,*Method of Test for Evaluation of Truss Plates Used in Lumber Joints [ID# 1957]*,**,* 16.00*,*04*,*G0*
*N*,*x*,*N*,*Y*,*S350-M1980*,*Code of Practice for Safety in Demolition of Structures [ID# 1958]*,**,* 21.00*,*04*,*G0*
*N*,*e*,*N*,*Y*,*CAN/CSA-S413-F87*,*Ouvrages de stationnement (ps:11/91) [ID# 2468]*,**,* 80.00*,*04*,*G0*
*N*,*x*,*N*,*Y*,*CAN/CSA-C445-M92*,*Design and Installation of Earth Energy Heat Pump Systems for Residential and Other Small Buildings [ID# 3102]*,**,* 34.00*,*05*,*A0*
*N*,*x*,*N*,*Y*,*C447-93*,*Design and Installation of Earth Energy Heat Pump Systems for Commercial and Institutional Buildings [ID# 4365]*,**,* 35.00*,*05*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-F416-87 (R1992)*,*Wind Energy Conversion Systems (WECS)--Safety, Design, and Operation Criteria [ID# 430]*,**,* 27.00*,*05*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-F416-F87 (C1992)*,*Systèmes de conversion d'énergie éolienne (SCEE): Critères de sécurité, de conception et de fonctionnement [ID# 2325]*,**,* 27.00*,*05*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-F417-M91*,*Wind Energy Conversion Systems (WECS)--Performance [ID# 2821]*,**,* 36.00*,*05*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-F417-FM91*,*Systèmes de conversion d'énergie éolienne (SCEE): performances [ID# 4569]*,**,* 36.00*,*05*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-F418-M91*,*Wind Energy Conversion Systems (WECS)--Interconnection to the Electric Utility [ID# 2820]*,**,* 26.00*,*05*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-F418-FM91*,*Systèmes de conversion d'énergie éolienne (SCEE): couplage sur le réseau publicd'électricité [ID# 4516]*,**,* 26.00*,*05*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-F429-M90*,*Recommended Practice for the Installation of Wind Energy Conversion Systems [ID# 2695]*,**,* 30.00*,*05*,*A0*
*N*,*x*,*N*,*Y*,*B228.1-1968*,*Pipes, Ducts and Fittings for Residential Type Air Conditioning Systems [ID# 274]*,**,* 14.00*,*05*,*B0*
*N*,*f*,*N*,*Y*,*CAN/CSA-C444-M87*,*Installation Requirements for Heat Recovery Ventilators [ID# 421]*,**,* 26.00*,*05*,*B0*
*N*,*e*,*N*,*Y*,*CAN/CSA-C444-FM87*,*Exigences relatives à l'installation des ventilateurs échangeurs de chaleur [ID# 2560]*,**,* 26.00*,*05*,*B0*
*N*,*x*,*N*,*Y*,*CAN/CSA-F280-M90*,*Determining the Required Capacity of Residential Space Heating and Cooling Appliances [ID# 2797]*,**,* 63.00*,*05*,*B0*
*N*,*f*,*N*,*Y*,*CAN/CSA-F326-M91*,*Residential Mechanical Ventilation Systems (rp:10/93) [ID# 2871]*,**,* 80.00*,*05*,*B0*
*N*,*e*,*N*,*Y*,*CAN/CSA-F326-FM91*,*Ventilation mécanique des habitations [ID# 3394]*,**,* 80.00*,*05*,*B0*
*N*,*x*,*N*,*N*,*DIR.006-1993*,*List of CSA Certified Comfort Conditioning Equipment [ID# 3214]*,**,* 20.00*,*05*,*C0*
*N*,*f*,*N*,*Y*,*CAN/CSA-B72-M87 (R1992)*,*Installation Code for Lightning Protection Systems (rp: 04/89) [ID# 409]*,**,* 38.00*,*05*,*C0*
*N*,*e*,*N*,*Y*,*CAN/CSA-B72-FM87 (C1992)*,*Code d'installation des paratonnerres [ID# 2369]*,**,* 38.00*,*05*,*C0*
*Y*,*e*,*N*,*Y*,*B140.4-F1974 (C1980) (C1991)*,*Fournaises à air chaud alimentées à l'huile [ID# 206]*,**,* 16.00*,*05*,*C0*
*Y*,*f*,*N*,*Y*,*B140.7.1-1976 (R1991)*,*Oil-Fired Steam and Hot-Water Boilers for Residential Use (a:3) [ID# 210]*,**,* 15.00*,*05*,*C0*
*Y*,*e*,*N*,*Y*,*B140.7.1-F1976 (C1991)*,*Chaudières à vapeur et à eau chaude alimentées au mazout, pour usage résidentiel [ID# 209]*,**,* 15.00*,*05*,*C0*
*Y*,*x*,*N*,*Y*,*B140.7.2-1967 (R1991)*,*Oil-Fired Steam and Hot-Water Boilers for Commercial and Industrial Use (a:1) [ID# 211]*,**,* 14.00*,*05*,*C0*
*Y*,*x*,*N*,*Y*,*B140.10-1974 (R1981) (R1991)*,*Oil-Fired Warm Air Heating Appliances for Mobile Housing and Recreational Vehicles (a:3) [ID# 195]*,**,* 14.00*,*05*,*C0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-B140.11-M89*,*Oil/Gas-Fired Commercial/Industrial Pressure Washers and Steam Cleaners [ID# 2445]*,**,* 44.00*,*05*,*C0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-B140.11-FM89*,*Nettoyeurs à jet d'eau sous pression ou à la vapeur, pour usages commercial et industriel, alimentés au mazout ou au gaz [ID# 2696]*,**,* 44.00*,*05*,*C0*
*Y*,*f*,*N*,*Y*,*B140.12-1976 (R1991)*,*Oil-Fired Service Water Heaters and Swimming Pool Heaters (a:11) [ID# 198]*,**,* 14.00*,*05*,*C0*
*Y*,*e*,*N*,*Y*,*B140.12-F1976 (C1991)*,*Chauffe-eau domestiques et chauffe-piscines à mazout (e:8) [ID# 197]*,**,* 14.00*,*05*,*C0*
*Y*,*x*,*N*,*Y*,*B140.14-M1979 (R1991)*,*Automatic Flue-Pipe Dampers for Use with Oil-Fired Appliances [ID# 199]*,**,* 16.00*,*05*,*C0*
*N*,*x*,*N*,*N*,*B201.9-1972*,*Hotel and Restaurant Gas Deep Fryers [ID# 4060]*,**,* 45.00*,*05*,*C0*
*N*,*x*,*N*,*N*,*B204.1-1971*,*Gas Fired Water Heaters, Automatic Storgage TyPE Water Heaters with Inputs Less than 50,000 BTU per Hour [ID# 4082]*,**,* 45.00*,*05*,*C0*
*N*,*f*,*N*,*Y*,*CAN/CSA-B211-M90*,*Seasonal Energy Utilization Efficiencies of Oil-Fired Water Heaters [ID# 2810]*,**,* 27.00*,*05*,*C0*
*N*,*e*,*N*,*Y*,*CAN/CSA-B211-FM90*,*Rendement énergétique saisonnier des chauffe-eau à mazout [ID# 3074]*,**,* 27.00*,*05*,*C0*
*N*,*x*,*N*,*Y*,*B212-93*,*Seasonal Energy Utilization Efficiences of Oil-Fired Furnaces and Boilers [ID# 3624]*,**,* 74.00*,*05*,*C0*
*N*,*f*,*N*,*Y*,*CAN/CSA-B365-M91*,*Installation Code for Solid-Fuel-Burning Appliances and Equipment (rp:03/92) [ID# 3040]*,**,* 55.00*,*05*,*C0*
*N*,*e*,*N*,*Y*,*CAN/CSA-B365-FM91*,*Code d'installation des appareils à combustibles solides et du matériel connexe (ps:G.I. NO. 2- INCORPORATED INTO BOOK WHEN PRINTED) [ID# 3326]*,**,* 55.00*,*05*,*C0*
*Y*,*f*,*N*,*Y*,*CAN/CSA-B366.1-M91*,*Solid-Fuel-Fired Central Heating Appliances [ID# 2899]*,**,* 63.00*,*05*,*C0*
*Y*,*e*,*N*,*Y*,*CAN/CSA-B366.1-FM91*,*Appareils à combustibles solides pour chauffage central [ID# 3245]*,**,* 63.00*,*05*,*C0*
*Y*,*f*,*N*,*Y*,*B376-M1980 (R1992)*,*Portable Containers for Gasoline and Other Petroleum Fuels (rp:07/87, 04/89) [ID# 331]*,**,* 18.00*,*05*,*C0*
*Y*,*e*,*N*,*Y*,*B376-FM1980 (C1992)*,*Réservoirs portatifs pour l'essence et autres combustibles de pétrole (ps:07/87) [ID# 330]*,**,* 18.00*,*05*,*C0*
*N*,*x*,*N*,*Y*,*CAN/CSA-B415.1-92*,*Performance Testing of Solid-Fuel-Burning Stoves, Inserts, and Low-Burn-Rate Factory-Built Fireplaces (rp:06/93) [ID# 3372]*,**,* 59.00*,*05*,*C0*
*N*,*f*,*N*,*Y*,*CAN/CSA-C282-M89*,*Emergency Electrical Power Supply for Buildings [ID# 2494]*,**,* 43.00*,*05*,*C0*
*N*,*e*,*N*,*Y*,*CAN/CSA-C282-FM89*,*Alimentation électrique de secours des bâtiments [ID# 2685]*,**,* 43.00*,*05*,*C0*
*N*,*f*,*N*,*Y*,*CAN/CSA-N285.0-M91*,*General Requirements for Pressure-Retaining Systems and Components in CANDU Nuclear Power Plants [ID# 3123]*,**,* 70.00*,*05*,*D0*
*N*,*e*,*N*,*Y*,*CAN/CSA-N285.0-FM91*,*Exigences générales relatives aux systèmes et aux composants sous pression des centrales nucléaires CANDU [ID# 3566]*,**,* 70.00*,*05*,*D0*
*N*,*x*,*N*,*Y*,*CAN/CSA-N285.1-M91*,*Requirements for Class 1, 2, and 3 Pressure-Retaining Systems and Components in CANDU Nuclear Power Plants [ID# 3124]*,**,* 29.00*,*05*,*D0*
*N*,*f*,*N*,*Y*,*CAN/CSA-N285.2-M89*,*Requirements for Class 1C, 2C, and 3C Pressure-Retaining Components and Supports in CANDU Nuclear Power Plants [ID# 2396]*,**,* 56.00*,*05*,*D0*
*N*,*e*,*N*,*Y*,*CAN/CSA-N285.2-FM89*,*Exigences relatives aux composants sous pression des classes 1C, 2C et 3C des centrales nucléaires CANDU et à leurs supports [ID# 2866]*,**,* 56.00*,*05*,*D0*
*N*,*f*,*N*,*Y*,*CAN/CSA-N285.3-88*,*Requirements for Containment Systems Components in CANDU Nuclear Power Plants [ID# 438]*,**,* 56.00*,*05*,*D0*
*N*,*e*,*N*,*Y*,*CAN/CSA-N285.3-F88*,*Exigences relatives aux composants des systèmes de confinement des centrales nucléaires CANDU [ID# 3103]*,**,* 56.00*,*05*,*D0*
*N*,*f*,*N*,*Y*,*CAN3-N285.4-M83*,*Periodic Inspection of CANDU Nuclear Power Plant Components (rp:10/84) [ID# 754]*,**,* 56.00*,*05*,*D0*
*N*,*e*,*N*,*Y*,*CAN3-N285.4-FM83*,*Inspection périodique des composants des centrales nucléaires CANDU [ID# 753]*,**,* 56.00*,*05*,*D0*
*N*,*f*,*N*,*Y*,*CAN/CSA-N285.5-M90*,*Periodic Inspection of CANDU Nuclear Power Plant Containment Components [ID# 2783]*,**,* 56.00*,*05*,*D0*
*N*,*e*,*N*,*Y*,*CAN/CSA-N285.5-FM90*,*Inspection périodique des composants de confinement des centrales nucléaires CANDU [ID# 3201]*,**,* 56.00*,*05*,*D0*
*N*,*f*,*N*,*Y*,*CAN/CSA-N285.6 SERIES-88*,*Material Standards for Reactor Components for CANDU Nuclear Power Plants [ID# 439]*,**,* 56.00*,*05*,*D0*
*N*,*e*,*N*,*Y*,*CAN/CSA-N285.6 SERIE-F88*,*Normes sur les matériaux des composants de réacteurs des centrales nucléaires CANDU [ID# 2813]*,**,* 56.00*,*05*,*D0*
*N*,*x*,*N*,*Y*,*CAN/CSA-N286.0-92*,*Overall Quality Assurance Program Requirements for Nuclear Power Plants [ID# 3369]*,**,* 56.00*,*05*,*D0*
*N*,*x*,*N*,*Y*,*N286.0.1-92*,*Commentary on the Principles for Quality Assurance Programs of CSA N286 Series Standards (rp:12/92) [ID# 3416]*,**,* 22.00*,*05*,*D0*
*N*,*f*,*N*,*Y*,*CAN3-N286.1-84*,*Procurement Quality Assurance for Nuclear Power Plants [ID# 758]*,**,* 56.00*,*05*,*D0*
*N*,*e*,*N*,*Y*,*CAN3-N286.1-F84*,*Assurance de la qualité de l'approvisionnement des centrales nucléaires [ID# 757]*,**,* 56.00*,*05*,*D0*
*N*,*f*,*N*,*Y*,*CAN3-N286.2-86*,*Design Quality Assurance for Nuclear Power Plants [ID# 759]*,**,* 56.00*,*05*,*D0*
*N*,*e*,*N*,*Y*,*CAN3-N286.2-F86*,*Assurance de la qualité de la conception des centrales nucléaires [ID# 2398]*,**,* 56.00*,*05*,*D0*
*N*,*f*,*N*,*Y*,*CAN3-N286.3-83*,*Construction Quality Assurance for Nuclear Power Plants [ID# 761]*,**,* 56.00*,*05*,*D0*
*N*,*e*,*N*,*Y*,*CAN3-N286.3-F83*,*Assurance de la qualité de construction des centrales nucléaires [ID# 760]*,**,* 56.00*,*05*,*D0*
*N*,*f*,*N*,*Y*,*CAN/CSA-N286.4-M86*,*Commissioning Quality Assurance for Nuclear Power Plants [ID# 440]*,**,* 56.00*,*05*,*D0*
*N*,*e*,*N*,*Y*,*CAN/CSA-N286.4-FM86*,*Assurance de la qualité de la mise en service des centrales nucléaires [ID# 2699]*,**,* 56.00*,*05*,*D0*
*N*,*f*,*N*,*Y*,*CAN/CSA-N286.5-M87*,*Operations Quality Assurance for Nuclear Power Plants [ID# 441]*,**,* 56.00*,*05*,*D0*
*N*,*e*,*N*,*Y*,*CAN/CSA-N286.5-FM87*,*Assurance de la qualité de l'exploitation des centrales nucléaires [ID# 2399]*,**,* 56.00*,*05*,*D0*
*N*,*x*,*N*,*Y*,*N287.1-93*,*General Requirements for Concrete Containment Structures for CANDU Nuclear Power Plants [ID# 3650]*,**,* 42.00*,*05*,*D0*
*N*,*x*,*N*,*Y*,*CAN/CSA-N287.2-M91*,*Material Requirements for Concrete Containment Structures for CANDU Nuclear Power Plants [ID# 3125]*,**,* 47.00*,*05*,*D0*
*N*,*x*,*N*,*Y*,*N287.3-93*,*Design Requirements for Concrete Containment Structures for CANDU Nuclear Power Plants [ID# 3610]*,**,* 74.00*,*05*,*D0*
*N*,*x*,*N*,*Y*,*CAN/CSA-N287.4-92*,*Construction, Fabrication, and Installation Requirements for Concrete Containment Structures for CANDU Nuclear Power Plants [ID# 3362]*,**,* 56.00*,*05*,*D0*
*N*,*x*,*N*,*Y*,*N287.5-93*,*Examination and Testing Requirements for Concrete Containment Structures for CANDU Nuclear Power Plants [ID# 3860]*,**,* 50.00*,*05*,*D0*
*N*,*x*,*N*,*Y*,*CAN/CSA-N287.6-M92*,*Pre-Operational Proof and Leakage Rate Testing Requirements for Concrete Containment Structures for CANDU Nuclear Power Plants [ID# 3126]*,**,* 26.00*,*05*,*D0*
*N*,*f*,*N*,*Y*,*CAN3-N287.7-M80*,*In-Service Examination and Testing Requirements for Concrete Containment Structures for CANDU Nuclear Power Plants [ID# 775]*,**,* 56.00*,*05*,*D0*
*N*,*e*,*N*,*Y*,*CAN3-N287.7-FM80*,*Prescriptions relatives à la mise à l'essai et à la vérification en cours d'exploitation, des enceintes de confinement en béton des centrales nucléaires CANDU [ID# 774]*,**,* 56.00*,*05*,*D0*
*N*,*x*,*N*,*Y*,*CAN/CSA-N288.1-M87*,*Guidelines for Calculating Derived Release Limits for Radioactive Material in Airborne and Liquid Effluents for Normal Operation of Nuclear Facilities [ID# 442]*,**,* 56.00*,*05*,*D0*
*N*,*x*,*N*,*Y*,*CAN/CSA-N288.2-M91*,*Guidelines for Calculating Radiation Doses to the Public From a Release of Airborne Radioactive Material Under Hypothetical Accident Conditions in Nuclear Reactors [ID# 2828]*,**,* 56.00*,*05*,*D0*
*N*,*f*,*N*,*Y*,*CAN3-N288.3.2-M85 (R1992)*,*High Efficiency Air-Cleaning Assemblies for Normal Operation of Nuclear Facilities [ID# 776]*,**,* 56.00*,*05*,*D0*
*N*,*e*,*N*,*Y*,*CAN3-N288.3.2-FM85 (C1992)*,*Caissons de filtration de l'air à rendement élevé pour l'exploitation normale des centrales nucléaires [ID# 2443]*,**,* 56.00*,*05*,*D0*
*N*,*x*,*N*,*Y*,*CAN/CSA-N288.4-M90*,*Guidelines for Radiological Monitoring of the Environment [ID# 2803]*,**,* 56.00*,*05*,*D0*
*N*,*f*,*N*,*Y*,*CAN3-N289.1-80 (R1992)*,*General Requirements for Seismic Qualification of CANDU Nuclear Power Plants [ID# 778]*,**,* 56.00*,*05*,*D0*
*N*,*e*,*N*,*Y*,*CAN3-N289.1-F80 (C1992)*,*Exigences générales relatives à la qualification parasismique des centrales nucléaires CANDU [ID# 777]*,**,* 56.00*,*05*,*D0*
*N*,*f*,*N*,*Y*,*CAN3-N289.2-M81 (R1992)*,*Ground Motion Determination for Seismic Qualification of CANDU Nuclear Power Plants [ID# 780]*,**,* 56.00*,*05*,*D0*
*N*,*e*,*N*,*Y*,*CAN3-N289.2-FM81 (C1992)*,*Détermination des mouvements de sol pour la qualification parasismique des centrales nucléaires CANDU [ID# 779]*,**,* 56.00*,*05*,*D0*
*N*,*f*,*N*,*Y*,*CAN3-N289.3-M81 (R1992)*,*Design Procedures for Seismic Qualification of CANDU Nuclear Power Plants [ID# 782]*,**,* 56.00*,*05*,*D0*
*N*,*e*,*N*,*Y*,*CAN3-N289.3-FM81 (C1992)*,*Calculs relatifs à la qualification parasismique des centrales nucléaires CANDU [ID# 781]*,**,* 56.00*,*05*,*D0*
*N*,*f*,*N*,*Y*,*CAN3-N289.4-M86 (R1992)*,*Testing Procedures for Seismic Qualification of CANDU Nuclear Power Plants [ID# 783]*,**,* 56.00*,*05*,*D0*
*N*,*e*,*N*,*Y*,*CAN3-N289.4-FM86 (C1992)*,*Méthodes d'essai relatives à la qualification parasismique des centrales nucléaires [ID# 2283]*,**,* 56.00*,*05*,*D0*
*N*,*x*,*N*,*Y*,*CAN/CSA-N289.5-M91*,*Seismic Instrumentation Requirements for CANDU Nuclear Power Plants [ID# 3037]*,**,* 20.00*,*05*,*D0*
*N*,*f*,*N*,*Y*,*CAN3-N290.1-80 (R1992)*,*Requirements for the Shutdown Systems of CANDU Nuclear Power Plants [ID# 785]*,**,* 56.00*,*05*,*D0*
*N*,*e*,*N*,*Y*,*CAN3-N290.1-F80 (C1992)*,*Exigences relatives aux systèmes d'arrêt des centrales nucléaires CANDU [ID# 784]*,**,* 56.00*,*05*,*D0*
*N*,*f*,*N*,*Y*,*CAN3-N290.4-M82 (R1992)*,*Requirements for the Reactor Regulating Systems of CANDU Nuclear Power Plants [ID# 787]*,**,* 56.00*,*05*,*D0*
*N*,*e*,*N*,*Y*,*CAN3-N290.4-FM82 (C1992)*,*Exigences relatives aux systèmes de régulation des réacteurs de centrales nucléaires CANDU [ID# 786]*,**,* 56.00*,*05*,*D0*
*N*,*x*,*N*,*Y*,*CAN/CSA-N290.5-M90*,*Requirements for the Support Power Systems of CANDU Nuclear Power Plants [ID# 2757]*,**,* 56.00*,*05*,*D0*
*N*,*f*,*N*,*Y*,*CAN3-N290.6-M82 (R1992)*,*Requirements for Monitoring and Display of CANDU Nuclear Power Plant Status in the Event of an Accident (rp:01/83) [ID# 789]*,**,* 56.00*,*05*,*D0*
*N*,*e*,*N*,*Y*,*CAN3-N290.6-FM82 (C1992)*,*Exigences relatives à la surveillance et à l'affichage de l'état d'une centrale nucléaire CANDU lors d'un accident [ID# 788]*,**,* 56.00*,*05*,*D0*
*N*,*f*,*N*,*Y*,*CAN/CSA-N293-M87*,*Fire Protection for CANDU Nuclear Power Plants [ID# 443]*,**,* 51.00*,*05*,*D0*
*N*,*e*,*N*,*Y*,*CAN/CSA-N293-FM87*,*Protection contre l'incendie des centrales nucléaires CANDU [ID# 2400]*,**,* 51.00*,*05*,*D0*
*Y*,*f*,*N*,*Y*,*CAN3-D230-M85*,*Protective Headgear in Motor Vehicle Applications [ID# 710]*,**,* 40.00*,*06*,*A0*
*Y*,*e*,*N*,*Y*,*CAN3-D230-FM85*,*Casques protecteurs (motocyclettes, motoneiges et autres véhicules automobiles) [ID# 709]*,**,* 40.00*,*06*,*A0*
*Y*,*e*,*N*,*Y*,*CAN3-D313-FM85*,*Train de roulement de remorque [ID# 2533]*,**,* 41.00*,*06*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-D603-88*,*Daytime Running Light Systems [ID# 424]*,**,* 35.00*,*06*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-D603-F88*,*Systèmes de feux de circulation de jour [ID# 2646]*,**,* 35.00*,*06*,*A0*
*N*,*x*,*N*,*Y*,*B335.3-93*,*Lift Truck Operator Training [ID# 4451]*,**,* 24.00*,*06*,*B0*
*N*,*f*,*N*,*Y*,*CAN/CSA-B339-88*,*Cylinders, Spheres, and Tubes for the Transportation of Dangerous Goods (rp:01/92, 02/93) [ID# 402]*,**,* 51.00*,*06*,*B0*
*N*,*e*,*N*,*Y*,*CAN/CSA-B339-F88*,*Bouteilles et tubes pour le transport des marchandises dangereuses (ps:01/92, 02/93) [ID# 2401]*,**,* 51.00*,*06*,*B0*
*N*,*f*,*N*,*Y*,*CAN/CSA-B340-M88*,*Selection and Use of Cylinders, Spheres, Tubes, and Other Containers for the Transportation of Dangerous Goods, Class 2 (rp:01/92, 02/93) [ID# 2479]*,**,* 50.00*,*06*,*B0*
*N*,*e*,*N*,*Y*,*CAN/CSA-B340-FM88*,*Sélection et utilisation de bouteilles, tubes et autres récipients pour le transport des marchandises dangereuses, classe 2 (ps:01/92, 02/93) [ID# 2718]*,**,* 50.00*,*06*,*B0*
*N*,*f*,*Y*,*Y*,*B616-M1989*,*Rigid Polyethylene Intermediate Bulk Containers for the Transportation of Dangerous Goods [ID# 2492]*,**,* 29.00*,*06*,*B0*
*N*,*e*,*Y*,*Y*,*B616-FM1989*,*Conteneurs intermédiaires en polyéthylène rigide pour le transport des marchandises dangereuses en vrac [ID# 2711]*,**,* 29.00*,*06*,*B0*
*N*,*f*,*Y*,*Y*,*B620-1987*,*Highway Tanks and Portable Tanks for the Transportation of Dangerous Goods (rp:02/92) [ID# 352]*,**,* 35.00*,*06*,*B0*
*N*,*e*,*Y*,*Y*,*B620-F1987*,*Citernes routières et citernes amovibles pour le transport des marchandises dangereuses (ps:02/92) [ID# 2402]*,**,* 35.00*,*06*,*B0*
*N*,*f*,*Y*,*Y*,*B621-1987*,*Selection and Use of Highway Tanks, Portable Tanks, Cargo Compartments and Containers for the Transportation of Dangerous Goods, Classes 3, 4, 5, 6, and 8, in Bulk by Road [ID# 353]*,**,* 26.00*,*06*,*B0*
*N*,*e*,*Y*,*Y*,*B621-F1987*,*Sélection et utilisation des citernes routières, des citernes amovibles, des compartiments à marchandises et des conteneurs pour le transport routier des marchandises dangereuses en vrac, classes 3, 4, 5, 6 et 8 [ID# 2403]*,**,* 26.00*,*06*,*B0*
*N*,*f*,*Y*,*Y*,*B622-1987*,*Selection and Use of Highway Tanks, Multi-Unit Tank Car Tanks, and Portable Tanks for the Transportation of Dangerous Goods, Class 2, by Road (rp:03/88) [ID# 354]*,**,* 25.00*,*06*,*B0*
*N*,*e*,*Y*,*Y*,*B622-F1987*,*Sélection et utilisation des citernes routières, des citernes de remorque-citerne à éléments multiples et des citernes amovibles pour le transport routier des marchandises dangereuses, classe 2 [ID# 2404]*,**,* 25.00*,*06*,*B0*
*N*,*f*,*Y*,*Y*,*B623-1987*,*Selection, Handling, and Use of Intermodal Portable Tanks for the Transportation of Dangerous Goods Other Than by Air [ID# 356]*,**,* 26.00*,*06*,*B0*
*N*,*e*,*Y*,*Y*,*B623-F1987*,*Sélection, manutention et utilisation des citernes amovibles intermodales pour le transport autre qu'aérien des marchandises dangereuses [ID# 2405]*,**,* 26.00*,*06*,*B0*
*N*,*f*,*N*,*Y*,*CAN/CSA-B629-M90*,*Recommended Practice on Shipping Documentation for the Transportation of Dangerous Goods [ID# 2779]*,**,* 40.00*,*06*,*B0*
*N*,*e*,*N*,*Y*,*CAN/CSA-B629-FM90*,*Pratique recommandée pour les documents de transport des marchandises dangereuses [ID# 3175]*,**,* 40.00*,*06*,*B0*
*N*,*x*,*N*,*Y*,*ISO 1496/1-1984*,*Series 1 freight containers - Specification and testing - Part 1: General cargo containers for general purposes [ID# 1795]*,**,* 0.00*,*06*,*B0*
*N*,*x*,*N*,*Y*,*ISO 1496/2-1979*,*Series 1 freight containers - Specification and testing - Part 2: Thermal containers [ID# 1796]*,**,* 0.00*,*06*,*B0*
*N*,*x*,*N*,*Y*,*ISO 1496/3-1981*,*Series 1 freight containers - Specification and testing - Part 3: Tank containers for liquids and gases [ID# 1797]*,**,* 0.00*,*06*,*B0*
*N*,*x*,*N*,*Y*,*ISO 1496/5-1977*,*Series 1 freight containers - Specification and Testing - Part V: Platform (container) [ID# 1798]*,**,* 0.00*,*06*,*B0*
*N*,*x*,*N*,*Y*,*ISO 1496/6C-1977*,*Series 1 freight containers - Specification and testing - Part VI C: Platform based containers, open-sided, with complete superstructure [ID# 1799]*,**,* 0.00*,*06*,*B0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z245.15-FM91*,*Robinetterie en acier [ID# 3626]*,**,* 61.00*,*06*,*C0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z245.20-M92/CAN/CSA-Z245.21-M92*,*External Fusion Bond Epoxy Coating for Steel Pipe/ External Polyethylene Coating for Pipe (rp:09/92) [ID# 3314]*,**,* 69.00*,*06*,*C0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z276-M89*,*Liquefied Natural Gas (LNG)--Production, Storage, and Handling [ID# 2611]*,**,* 102.00*,*06*,*C0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z276-FM89*,*Gaz naturel liquéfié (GNL)--Production, stockage et manutention [ID# 2707]*,**,* 102.00*,*06*,*C0*
*N*,*x*,*N*,*Y*,*Z341-93*,*Storage of Hydrocarbons in Underground Formations [ID# 3988]*,**,* 79.00*,*06*,*C0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z343-93*,*Test Methods for In-Line and Firebox Flame Arresters [ID# 4363]*,**,* 39.00*,*06*,*C0*
*N*,*x*,*N*,*N*,*PKG.6600-93*,*Offshore Package (Consists of : CAN/CSA-S471-92, S471.1-1992, CAN/CSA-S472-92, S472.1-1992, CAN/CSA-S473-92, S473.1-1992, S474-93, and S475-93) [ID# 4492]*,**,* 385.00*,*06*,*D0*
*N*,*f*,*N*,*Y*,*CAN/CSA-S471-92*,*General Requirements, Design Criteria, the Environment, and Loads (rp:01/94) [ID# 3335]*,**,* 75.00*,*06*,*D0*
*N*,*e*,*N*,*Y*,*CAN/CSA-S471-F92*,*Exigences générales, critères de calcul, conditions environnementales et charges [ID# 3510]*,**,* 75.00*,*06*,*D0*
*N*,*x*,*N*,*Y*,*S471.1-1992*,*Commentary to CSA Standard CAN/CSA-S471-92, General Requirements, Design Criteria, the Environment, and Loads [ID# 3342]*,**,* 25.00*,*06*,*D0*
*Y*,*f*,*N*,*Y*,*W47.1-92*,*Certification of Companies for Fusion Welding of Steel Structures (rp:01/94) [ID# 3469]*,**,* 49.00*,*07*,*A0*
*Y*,*e*,*N*,*Y*,*W47.1-F92*,*Certification des compagnies de soudage par fusion des structures en acier [ID# 3632]*,**,* 47.00*,*07*,*A0*
*N*,*f*,*N*,*Y*,*W47.1S1-M1989*,*Supplement No. 1-M1989 to W47.1-1983 Certification of Companies for Fusion Welding of Steel Structures (rp:02/92) [ID# 2573]*,**,* 27.00*,*07*,*A0*
*N*,*e*,*N*,*Y*,*W47.1S1-FM1989*,*Supplément No. 1-M1989 à la norme CSA W47.1-F1983, Certification des compagnies de soudage par fusion des structures en acier (ps:02/92) [ID# 3258]*,**,* 27.00*,*07*,*A0*
*N*,*f*,*N*,*Y*,*W47.2-M1987*,*Certification of Companies for Fusion Welding of Aluminum [ID# 1985]*,**,* 56.00*,*07*,*A0*
*N*,*e*,*N*,*Y*,*W47.2-FM1987*,*Certification des compagnies de soudage par fusion de l'aluminium [ID# 1983]*,**,* 56.00*,*07*,*A0*
*N*,*x*,*N*,*Y*,*W48.1-M1991*,*Carbon Steel Covered Electrodes for Shielded Metal Arc Welding (rp:02/92) [ID# 2843]*,**,* 38.00*,*07*,*A0*
*N*,*x*,*N*,*Y*,*W48.2-M1992*,*Chromium and Chromium-Nickel Steel Covered Electrodes for Shielded Metal Arc Welding [ID# 3088]*,**,* 35.00*,*07*,*A0*
*Y*,*x*,*N*,*Y*,*W48.3-93*,*Low Alloy Steel Covered Electrodes for Shielded Metal Arc Welding [ID# 4203]*,**,* 51.00*,*07*,*A0*
*N*,*x*,*N*,*Y*,*W48.4-M1980*,*Solid Mild Steel Filler Metals for Gas Shielded Arc Welding (rp:08/84) [ID# 1991]*,**,* 18.00*,*07*,*A0*
*N*,*x*,*N*,*Y*,*W48.5-M1990*,*Carbon Steel Electrodes for Flux- and Metal-Cored Arc Welding [ID# 2609]*,**,* 61.00*,*07*,*A0*
*N*,*x*,*N*,*Y*,*W48.6-M1980*,*Bare Mild Steel Electrodes and Fluxes for Submerged Arc Welding (rp:08/84) [ID# 1994]*,**,* 18.00*,*07*,*A0*
*N*,*x*,*N*,*Y*,*W48.7-M1977*,*Diffusible Hydrogen in Mild Steel and Low-Alloy Steel Weld Metals: Test Methods [ID# 1995]*,**,* 14.00*,*07*,*A0*
*N*,*x*,*N*,*Y*,*W55.3-1965*,*Resistance Welding Qualification Code for Fabricators of Structural Members Used in Buildings [ID# 1996]*,**,* 14.00*,*07*,*A0*
*N*,*f*,*N*,*Y*,*W59-M1989*,*Welded Steel Construction (Metal Arc Welding) (rp:10/92) [ID# 2409]*,**,* 48.00*,*07*,*A0*
*N*,*e*,*N*,*Y*,*W59-FM1989*,*Construction soudée en acier (soudage à l'arc) [ID# 2792]*,**,* 48.00*,*07*,*A0*
*N*,*x*,*N*,*Y*,*W59-1989*,*Welded Steel Construction (Metal Arc Welding) (rp:10/92) [ID# 2408]*,**,* 48.00*,*07*,*A0*
*N*,*f*,*N*,*Y*,*W59S1-M1989*,*Supplement No. 1-M1989, Steel Fixed Offshore Structures, to W59-1989, Welded Steel Construction (Metal Arc Welding) (rp:10/90) [ID# 2574]*,**,* 27.00*,*07*,*A0*
*N*,*e*,*N*,*Y*,*W59S1-FM1989*,*Supplément no 1-M1989, Structures offshore fixes en acier à la norme CSA W59-M1989, Construction soudée en acier (soudage à l'arc) [ID# 3511]*,**,* 27.00*,*07*,*A0*
*N*,*f*,*N*,*Y*,*W59.2-M1991*,*Welded Aluminum Construction [ID# 2832]*,**,* 53.00*,*07*,*A0*
*N*,*e*,*N*,*Y*,*W59.2-FM1991*,*Construction soudée en aluminium [ID# 3020]*,**,* 53.00*,*07*,*A0*
*N*,*x*,*N*,*Y*,*CAN/CSA-W117.2-M92*,*Safety in Welding, Cutting, and Allied Processes [ID# 3515]*,**,* 57.00*,*07*,*A0*
*N*,*x*,*N*,*Y*,*W178.1-1990*,*Certification of Welding Inspection Organizations [ID# 2825]*,**,* 25.00*,*07*,*A0*
*N*,*f*,*N*,*Y*,*W178.2-1990*,*Certification of Welding Inspectors [ID# 2777]*,**,* 35.00*,*07*,*A0*
*N*,*e*,*N*,*Y*,*W178.2-F1990*,*Qualification des inspecteurs en soudage [ID# 3324]*,**,* 35.00*,*07*,*A0*
*N*,*f*,*N*,*Y*,*W186-M1990*,*Welding of Reinforcing Bars in Reinforced Concrete Construction [ID# 2791]*,**,* 53.00*,*07*,*A0*
*N*,*e*,*N*,*Y*,*W186-FM1990*,*Soudage des barres d'armature dans les constructions en béton armé [ID# 3187]*,**,* 53.00*,*07*,*A0*
*N*,*x*,*Y*,*Y*,*W375 SEC. 1-F1984*,*Terminologie française du soudage, Section 1: Discontinuités et défauts de soudage [ID# 1977]*,**,* 21.00*,*07*,*A0*
*N*,*x*,*N*,*Y*,*W375 SEC. 2-F1986*,*Terminologie française du soudage, Section 2: Procédés de soudage et techniques connexes [ID# 1978]*,**,* 24.00*,*07*,*A0*
*N*,*x*,*N*,*Y*,*W375 SEC. 3-F1990*,*Terminologie française du soudage, Section 3: Assemblages, préparations et soudures [ID# 2851]*,**,* 50.00*,*07*,*A0*
*N*,*x*,*N*,*Y*,*ANSI/AWWA C150/A21.50-1981*,*Thickness Design of Ductile-Iron Pipe [ID# 2921]*,**,* 0.00*,*07*,*B0*
*N*,*x*,*N*,*Y*,*B33.4-1973*,*Galvanized Steel Tower Bolts and Nuts [ID# 289]*,**,* 14.00*,*07*,*C0*
*N*,*x*,*N*,*Y*,*B111-1974*,*Wire Nails, Spikes and Staples [ID# 159]*,**,* 15.00*,*07*,*C0*
*N*,*f*,*N*,*Y*,*CAN/CSA-B131.1-M88*,*External Zinc-Coating of Ductile Iron Pipe (Adopted ISO 8179:1985) [ID# 2271]*,**,* 20.00*,*07*,*C0*
*N*,*e*,*N*,*Y*,*CAN/CSA-B131.1-FM88*,*Tuyaux en fonte ductile: revêtement extérieur au zinc (norme ISO 8179:1985 adoptée) [ID# 2642]*,**,* 20.00*,*07*,*C0*
*N*,*x*,*N*,*N*,*B131.2-1956*,*Cast Iron Pit Cast Pipe for Water or Other Liquids (ANSI A21.2-1953; AWWA C102-53) [ID# 3906]*,**,* 45.00*,*07*,*C0*
*N*,*f*,*N*,*Y*,*CAN/CSA-G4-92*,*Steel Wire Rope for General Purpose and for Mine Hoisting and Mine Haulage [ID# 3388]*,**,* 53.00*,*07*,*C0*
*N*,*e*,*N*,*Y*,*CAN/CSA-G4-F92*,*Câbles d'acier pour utilisation générale ainsi que pour l'extraction et le halage dans les mines [ID# 3496]*,**,* 53.00*,*07*,*C0*
*N*,*e*,*N*,*Y*,*G30.15-FM1983 (C1991)*,*Treillis d'acier crénelé à mailles soudées pour l'armature du béton [ID# 1697]*,**,* 21.00*,*07*,*C0*
*N*,*f*,*N*,*Y*,*CAN/CSA-G30.18-M92*,*Billet-Steel Bars for Concrete Reinforcement (rp:06/93) [ID# 3417]*,**,* 23.00*,*07*,*C0*
*N*,*e*,*N*,*Y*,*CAN/CSA-G30.18-FM92*,*Barres d'acier en billettes pour l'armature du béton [ID# 4596]*,**,* 23.00*,*07*,*C0*
*N*,*f*,*N*,*Y*,*CAN/CSA-G40.20/G40.21-92*,*General Requirements for Rolled or Welded Structural Quality Steel/ Structural Quality Steels (e:1) (rp:05/92, 01/93) [ID# 3238]*,**,* 84.00*,*07*,*C0*
*N*,*e*,*N*,*Y*,*CAN/CSA-G40.20/G40.21-F92*,*Exigences générales relatives à l'acier de construction laminé ou soudé/ Aciers de construction [ID# 3497]*,**,* 84.00*,*07*,*C0*
*N*,*f*,*N*,*Y*,*CAN/CSA-G40.20/G40.21-M92*,*General Requirements for Rolled or Welded Structural Quality Steel/ Structural Quality Steels (e:1) (rp:05/92, 01/93) [ID# 3081]*,**,* 84.00*,*07*,*C0*
*N*,*e*,*N*,*Y*,*CAN/CSA-G40.20/G40.21-FM92*,*Exigences générales relatives à l'acier de construction laminé ou soudé/ Aciers de construction [ID# 3498]*,**,* 80.00*,*07*,*C0*
*N*,*x*,*N*,*Y*,*G162.1-M1977 (R1992)*,*Methods of Determining Mass of Coating on Zinc-Coated (Galvanized) Steel Wire [ID# 1683]*,**,* 14.00*,*07*,*C0*
*N*,*e*,*N*,*Y*,*CAN/CSA-G164-FM92*,*Galvanisation à chaud des objets de forme irrégulière [ID# 3499]*,**,* 28.00*,*07*,*C0*
*N*,*x*,*N*,*Y*,*G189-1966 (R1980) (R1992)*,*Sprayed Metal Coatings for Atmospheric Corrosion Protection [ID# 1685]*,**,* 16.00*,*07*,*C0*
*N*,*f*,*N*,*Y*,*G279-M1982*,*Steel for Prestressed Concrete Tendons [ID# 1687]*,**,* 23.00*,*07*,*C0*
*N*,*e*,*N*,*Y*,*G279-FM1982*,*Acier pour le béton précontraint [ID# 1686]*,**,* 23.00*,*07*,*C0*
*N*,*x*,*N*,*Y*,*G279-1975*,*Steel for Prestressed Concrete Tendons [ID# 1688]*,**,* 14.00*,*07*,*C0*
*N*,*f*,*N*,*Y*,*CAN3-G279.2-M84 (R1992)*,*Steel Wire in Mill Coils for Prestressed Concrete Railroad Ties [ID# 719]*,**,* 26.00*,*07*,*C0*
*N*,*e*,*N*,*Y*,*CAN3-G279.2-FM84 (C1992)*,*Couronnes de fil-machine pour armature des traverses de chemin de fer en béton précontraint [ID# 718]*,**,* 26.00*,*07*,*C0*
*N*,*f*,*N*,*Y*,*CAN3-G312.1-75 (R1980) (R1992)*,*Preferred Metric Dimensions for Flat Metal Products [ID# 721]*,**,* 14.00*,*07*,*C0*
*N*,*e*,*N*,*Y*,*CAN3-G312.1-F75 (C1980) (C1992)*,*Dimensions métriques normales des produits métalliques plats [ID# 720]*,**,* 14.00*,*07*,*C0*
*N*,*f*,*N*,*Y*,*CAN3-G312.2-M76 (R1992)*,*Preferred Metric Dimensions for Round, Square, Rectangular and Hexagonal Metal Products [ID# 723]*,**,* 14.00*,*07*,*C0*
*N*,*e*,*N*,*Y*,*CAN3-G312.2-FM76 (C1992)*,*Dimensions métriques normales des produits métalliques ronds, carrés, rectangulaires et hexagonaux [ID# 722]*,**,* 14.00*,*07*,*C0*
*N*,*x*,*N*,*Y*,*CAN/CSA-G312.3-M92*,* Metric Dimensions for Structural Steel Shapes and Hollow Structural Sections (rp:05/92) [ID# 3087]*,**,* 42.00*,*07*,*C0*
*N*,*x*,*N*,*Y*,*G387-M1981 (R1992)*,*Steel Wire Rope for Elevators [ID# 1713]*,**,* 23.00*,*07*,*C0*
*N*,*x*,*N*,*N*,*PKG.8800-92*,*Quality Assurance Standards (Consists of: CAN3-Z299.0-86, CAN3-Z299.1-85, CAN3-Z299.2-85, CAN3-Z299.3-85, CAN3-Z299.4-85, CAN/CSA-Q9004-92, CAN/CSA-Q10011-91, and a binder.) [ID# 3251]*,**,* 192.00*,*08*,*A0*
*N*,*e*,*N*,*N*,*PKG.8801-92*,*La série complète des normes sur l'assurance de la qualité (comprend CAN3-Z299.0-86,CAN3-Z299.1-85, CAN3-Z299.2-85, CAN3-Z299.3-85, CAN3-Z299.4-85, CAN/CSA-Q9004-92,CAN/CSA-Q10011-91, sous reliure) [ID# 3387]*,**,* 192.00*,*08*,*A0*
*N*,*x*,*N*,*N*,*PKG.8803-92*,*Software Quality Assurance Program (Consists of: CAN/CSA-Q396.0-91, CAN/CSA-Q396.1.1-89, CAN/CSA-Q396.1.2-89, CAN/CSA-Q396.2.1-89, CAN/CSA-Q396.2.2-89, and CAN/CSA-Q9000.3-92.) [ID# 3240]*,**,* 158.00*,*08*,*A0*
*N*,*x*,*N*,*N*,*PKG.8804*,*Quality System Checklists (Consists of: QMI 1-1985, QMI 2-1985, QMI 3-1985, and QMI 4-1985.) [ID# 2420]*,**,* 105.00*,*08*,*A0*
*N*,*x*,*N*,*N*,*PKG.8806-92*,*Programme d'assurance de la qualité pour les logiciels (comprend CAN/CSA-Q396.1.1-89, CAN/CSA-Q396.1.2-89, CAN/CSA-Q396.2.1-89 et CAN/CSA-Q396.2.2-89, CAN/CSA- Q9000.3-F92, and CAN/CSA-Q396.0-F91) [ID# 2648]*,**,* 158.00*,*08*,*A0*
*N*,*x*,*N*,*N*,*PKG.8808-92*,*Q9000 Quality Systems (Consists of: CAN/CSA-Q9000-92, CAN/CSA-Q9001-91, CAN/CSA-Q9002-91, CAN/CSA-Q9003-91, CAN/CSA-Q9004-92, CAN/CSA-Q9004.2-92, and CAN/CSA-Q10011-91.) [ID# 3299]*,**,* 144.00*,*08*,*A0*
*N*,*e*,*N*,*N*,*PKG.8809-92*,*Série Q9000 sur les systèmes qualité (comprend CAN/CSA-Q9000-F92, CAN/CSA-Q9001-F91, CAN/CSA-Q9002-F91, CAN/CSA-Q9003-F91, CAN/CSA-Q9004-F92, CAN/CSA-Q9004.2-F92, et CAN/CSA-Q10011-F91) [ID# 3414]*,**,* 144.00*,*08*,*A0*
*N*,*x*,*N*,*N*,*PLUS 8802*,*A General Guide on Procurement, Quality Assurance Standards and Organizations [ID# 1934]*,**,* 47.00*,*08*,*A0*
*N*,*f*,*N*,*Y*,*PLUS 8805*,*How to Document Your Quality Program (based on the Z299 Series of Standards) [ID# 4564]*,**,* 95.00*,*08*,*A0*
*N*,*e*,*N*,*Y*,*PLUS 8806*,*Comment documenter votre programme de la qualité (d'après la série de normes Z299) [ID# 4565]*,**,* 95.00*,*08*,*A0*
*N*,*x*,*N*,*N*,*PLUS 8807*,*Comparison and Analysis of ISO 9000 and CSA Z299 Standards (e:2) [ID# 2661]*,**,* 61.00*,*08*,*A0*
*N*,*x*,*N*,*Y*,*PLUS 8809*,*Comparison of CSA Standards CAN/CSA-Q9000.3-92 and CAN/CSA-Q396.1.1-89 [ID# 4542]*,**,* 20.00*,*08*,*A0*
*N*,*x*,*N*,*N*,*QMI 1-1985*,*System Checklists (based on CAN3-Z299.1-85) [ID# 2416]*,**,* 30.00*,*08*,*A0*
*N*,*x*,*N*,*N*,*QMI 2-1985*,*System Checklists (based on CAN3-Z299.2-85) [ID# 2417]*,**,* 30.00*,*08*,*A0*
*N*,*x*,*N*,*N*,*QMI 3-1985*,*System Checklists (based on CAN3-Z299.3-85) [ID# 2418]*,**,* 30.00*,*08*,*A0*
*N*,*e*,*N*,*Y*,*QMI 3-F1985*,*Listes de pointage (d'après CAN3-Z299.3-85) [ID# 4567]*,**,* 30.00*,*08*,*A0*
*N*,*x*,*N*,*N*,*QMI 4-1985*,*System Checklists (based on CAN3-Z299.4-85) [ID# 2419]*,**,* 25.00*,*08*,*A0*
*N*,*e*,*N*,*Y*,*QMI 4-F1985*,*Listes de pointage (d'après CAN3-Z299.4-85) [ID# 4568]*,**,* 25.00*,*08*,*A0*
*N*,*x*,*N*,*N*,*QMI 5-1989*,*Quality: A Basic Approach: A Do It Yourself Kit for Small Business [ID# 2665]*,**,* 25.00*,*08*,*A0*
*N*,*f*,*N*,*Y*,*QMI 10-91*,*System Checklists (based on CAN/CSA-Q9001-91) [ID# 4543]*,**,* 45.00*,*08*,*A0*
*N*,*e*,*N*,*Y*,*QMI 10-F91*,*Listes de pointage (d'après CAN/CSA-Q9001-F91) [ID# 4544]*,**,* 45.00*,*08*,*A0*
*N*,*f*,*N*,*Y*,*QMI 11-91*,*System Checklists (based on CAN/CSA-Q9002-91) [ID# 4545]*,**,* 45.00*,*08*,*A0*
*N*,*e*,*N*,*Y*,*QMI 11-F91*,*Listes de pointage (d'après CAN/CSA-Q9002-F91) [ID# 4546]*,**,* 45.00*,*08*,*A0*
*N*,*f*,*N*,*Y*,*QMI 12-91*,*System Checklists (based on CAN/CSA-Q9003-91) [ID# 4547]*,**,* 35.00*,*08*,*A0*
*N*,*e*,*N*,*Y*,*QMI 12-F91*,*Listes de pointage (d'après CAN/CSA-Q9003-91) [ID# 4566]*,**,* 35.00*,*08*,*A0*
*N*,*f*,*N*,*Y*,*QMI 13-87*,*System Checklist (based on ISO 9001-1987) (Includes QMI 25--Definitions and Clarifications for Registration to the ISO 9000 Series of Standards) [ID# 4548]*,**,* 30.00*,*08*,*A0*
*N*,*e*,*N*,*Y*,*QMI 13-F87*,*Listes de pointage (d'après ISO 9001-1987) (contient QMI 25--Définitions et éclaircissements pour l'audit et l'inscription d'entreprises aux normes ISO 9001, ISO 9002 et ISO 9003-1987) [ID# 4549]*,**,* 30.00*,*08*,*A0*
*N*,*f*,*N*,*Y*,*QMI 14-87*,*System Checklist (based on ISO 9002-1987) (Includes QMI 25--Definitions and Clarifications for REgistration to the ISO 9000 Series of Standards) [ID# 4550]*,**,* 30.00*,*08*,*A0*
*N*,*e*,*N*,*Y*,*QMI 14-F87*,*Listes de pointage (d'après ISO 9002-1987) (contient QMI 25--Définitions et éclaircissements pour l'audit et l'inscription d'entreprises aux normes ISO 9001, ISO 9002 et ISO 9003-1987) [ID# 4551]*,**,* 30.00*,*08*,*A0*
*N*,*f*,*N*,*Y*,*QMI 15-87*,*System Checklist (based on ISO 9003-1987) (Includes QMI 25--Definitions and Clarifications for Registration to the ISO 9000 Series of Standards) [ID# 4552]*,**,* 20.00*,*08*,*A0*
*N*,*e*,*N*,*Y*,*QMI 15-F87*,*Listes de pointage (d'après ISO 9003-1987) (contient QMI 25--Définitions et éclaircissements pour l'audit et l'inscription d'entreprises aux normes ISO 9001, ISO 9002 et ISO 9003-1987) [ID# 4553]*,**,* 20.00*,*08*,*A0*
*N*,*f*,*N*,*Y*,*QMI 16-87*,*Definitions and Clarifications for Auditing and the REgistration of Service Organizations to the ISO 9000 Series of Standards [ID# 4554]*,**,* 0.00*,*08*,*A0*
*N*,*e*,*N*,*Y*,*QMI 16-F87*,*Liste de pointage supplémentaire à utiliser lors de l'inscription des entreprises de service aux normes ISO 9000 [ID# 4555]*,**,* 0.00*,*08*,*A0*
*N*,*f*,*N*,*Y*,*QMI 18-87*,*Definitions and Clarifications for Auditing and Registering Software Development to ISO 9001-1987 [ID# 4556]*,**,* 0.00*,*08*,*A0*
*N*,*e*,*N*,*Y*,*QMI 18-F87*,*Les définitions et les clarifications pour l'audit et l'enregistrement de la création de logiciels conformément à l'ISO 9001-1987 [ID# 4557]*,**,* 0.00*,*08*,*A0*
*N*,*x*,*N*,*Y*,*QMI 20-87*,*Dual Registration Checklists (based on CAN3-Z299.1-1985 and ISO 9001-1987) [ID# 4558]*,**,* 45.00*,*08*,*A0*
*N*,*x*,*N*,*Y*,*QMI 21-87*,*Dual REgistration Checklists (based on CAN3-Z299.2-1987 and ISO 9002-1987) [ID# 4559]*,**,* 45.00*,*08*,*A0*
*N*,*f*,*N*,*Y*,*QMI 22-87*,*Dual Registration Checklists (based on CAN3-Z299.3-1987 and ISO 9002-1987) [ID# 4560]*,**,* 45.00*,*08*,*A0*
*N*,*e*,*N*,*Y*,*QMI 22-F87*,*Listes de pointage (d'après CAN3-Z299.3-1987 et ISO 9002-1987) [ID# 4561]*,**,* 45.00*,*08*,*A0*
*N*,*x*,*N*,*Y*,*QMI 23-87*,*Dual Registration Checklists (based on CAN3-Z299.3-1987 and ISO 9003-1987) [ID# 4562]*,**,* 45.00*,*08*,*A0*
*N*,*x*,*N*,*Y*,*QMI 24-87*,*Dual Registration Checklists (based on CAN3-Z299.4 and ISO 9003-1987) [ID# 4563]*,**,* 30.00*,*08*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Q396.0-91*,*Guide for Selecting and Implementing the CAN/CSA-Q396-89 Software Quality Assurance Program Standards [ID# 3127]*,**,* 40.00*,*08*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Q396.0-F91*,*Guide de sélection et de mise en pratique des normes CAN/CSA-Q396-89 sur le programme d'assurance de la qualité des logiciels [ID# 3621]*,**,* 42.00*,*08*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Q396.1.1-89*,*Quality Assurance Program for the Development of Software Used in Critical Applications [ID# 2346]*,**,* 40.00*,*08*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Q396.1.1-F89*,*Programme d'assurance de la qualité pour la réalisation de logiciels critiques [ID# 2584]*,**,* 40.00*,*08*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Q396.1.2-89*,*Quality Assurance Program for Previously Developed Software Used in Critical Applications [ID# 2347]*,**,* 40.00*,*08*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Q396.1.2-F89*,*Programme d'assurance de la qualité pour les logiciels critiques en service [ID# 2583]*,**,* 40.00*,*08*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Q396.2.1-89*,*Quality Assurance Program for the Development of Software Used in Noncritical Applications [ID# 2348]*,**,* 40.00*,*08*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Q396.2.1-F89*,*Programme d'assurance de la qualité pour la réalisation de logiciels non critiques [ID# 2582]*,**,* 40.00*,*08*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Q396.2.2-89*,*Quality Assurance Program for Previously Developed Software Used in Noncritical Applications [ID# 2349]*,**,* 40.00*,*08*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Q396.2.2-F89*,*Programme d'assurance de la qualité pour les logiciels non critiques en service [ID# 2581]*,**,* 40.00*,*08*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Q419-88*,*Recommended Practices for Calibration and Use of Devices for Measuring and Testing [ID# 447]*,**,* 38.00*,*08*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Q419-F88*,*Pratiques recommandées pour l'étalonnage et l'utilisation des appareils de mesure et d'essai [ID# 2480]*,**,* 38.00*,*08*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Q632-90*,*Reliability and Maintainability Management Guidelines [ID# 2716]*,**,* 36.00*,*08*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Q632-F90*,*Lignes directrices sur la gestion de la fiabilité et de la maintenabilité [ID# 3184]*,**,* 36.00*,*08*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Q633-90*,*Reliability, Availability, and Maintainability Design Guide for Electronic Products [ID# 2717]*,**,* 43.00*,*08*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Q633-F90*,*Guide de conception de la fiabilité, de la disponibilité et de la maintenabilité des produits électroniques [ID# 3185]*,**,* 43.00*,*08*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Q634-91*,*Risk Analysis Requirements and Guidelines [ID# 3131]*,**,* 49.00*,*08*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Q634-F91*,*Exigences et guide pour l'analyse des risques [ID# 3508]*,**,* 49.00*,*08*,*A0*
*N*,*x*,*N*,*Y*,*Q636-93*,*Guidelines and Requirements for Reliability Analysis Methods [ID# 3526]*,**,* 49.00*,*08*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Q640-88*,*Quality--Vocabulary (Adopted ISO 8402:1986) [ID# 450]*,**,* 30.00*,*08*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Q640-F88*,*Qualité--Vocabulaire (norme ISO 8402:1986 adoptée) [ID# 2438]*,**,* 30.00*,*08*,*A0*
*N*,*x*,*N*,*Y*,*Q641-1992*,*Guide for Quality Assurance Programs for Physical and Chemical Testing Laboratories (Special Publication) [ID# 3132]*,**,* 35.00*,*08*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Q9000-92*,*Quality Management and Quality Assurance Standards--Guidelines for Selection and Use (Adopted ISO 9000:1987, with supplementary guidance) [ID# 3128]*,**,* 20.00*,*08*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Q9000-F92*,*Normes pour la gestion de la qualité et l'assurance de la qualité--Lignes directrices pour la sélection et l'utilisation (norme ISO 9000:1987 adoptée avec guide supplémentaire) [ID# 3357]*,**,* 20.00*,*08*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Q9000.3-92*,*Quality Management and Quality Assurance Standards--Part 3: Guidelines for the Application of ISO 9001 to the Development, Supply and Maintenance of Software (Adopted ISO 9000-3:1991) [ID# 3129]*,**,* 25.00*,*08*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Q9000.3-F92*,*Normes pour la gestion de la qualité et l'assurance de la qualité--Partie 3: Lignes directrices pour l'application de l'ISO 9001 au développement, à la mise à disposition et à la maintenance du logiciel (norme ISO Q9000-3:1991 adoptée) [ID# 3374]*,**,* 25.00*,*08*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Q9001-91*,*Quality Systems--Quality Assurance in Design/Development, Production, Installation, and Servicing (Adopted ISO 9001:1987) [ID# 2876]*,**,* 37.00*,*08*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Q9001-F91*,*Systèmes qualité--Modèle pour l'assurance de la qualité en conception/ développement, production, installation et soutien après la vente (norme ISO 9001:1987 adoptée) [ID# 3390]*,**,* 37.00*,*08*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Q9002-91*,*Quality Systems--Quality Assurance in Production and Installation (Adopted ISO 9002:1987) [ID# 2875]*,**,* 32.00*,*08*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Q9002-F91*,*Systèmes qualité--Modèle pour l'assurance de la qualité en production et en installation (norme ISO 9002:1987 et supplément adoptées) [ID# 3405]*,**,* 32.00*,*08*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Q9003-91*,*Quality Systems--Quality Assurance in Final Inspection and Test (Adopted ISO 9003:1987) [ID# 2874]*,**,* 23.00*,*08*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Q9003-F91*,*Systèmes qualité--Assurance de la qualité en contrôle et essais finals (norme ISO 9003:1987 et supplément adoptées) [ID# 3406]*,**,* 23.00*,*08*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Q9004-92*,*Quality Management and Quality System Elements--Guidelines (Adopted ISO 9004:1987) [ID# 3198]*,**,* 28.00*,*08*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Q9004-F92*,*Gestion de la qualité et éléments de système qualité--Lignes directrices (norme ISO 9004:1987 adoptée) [ID# 3377]*,**,* 28.00*,*08*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Q9004.2-92*,*Quality Management and Quality System Elements--Part 2: Guidelines for Services (Adopted ISO 9004-2:1991) [ID# 3130]*,**,* 28.00*,*08*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Q9004.2-F92*,*Gestion de la qualité et éléments de système qualité--Partie 2: Lignes directrices pour les services (norme ISO 9004-2:1991 adoptée) [ID# 3410]*,**,* 28.00*,*08*,*A0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Q10011-91*,*Guidelines for Auditing Quality Systems (Adopted ISO 10011-1:1990, 10011-2:1991, 10011-3:1991) [ID# 3104]*,**,* 37.00*,*08*,*A0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Q10011-F91*,*Lignes directrices pour l'audit des systèmes qualité (normes ISO 10011-1:1990, 10011-2:1991, 10011-3:1991 adoptées) [ID# 3353]*,**,* 37.00*,*08*,*A0*
*N*,*x*,*N*,*Y*,*Z90-1975*,*Introduction to Sampling Procedures for Materials and Manufactured Products [ID# 2228]*,**,* 25.00*,*08*,*A0*
*N*,*f*,*N*,*Y*,*CAN3-Z299.0-86 (R1991)*,*Guide for Selecting and Implementing the CAN3-Z299-85 Quality Assurance Program Standards [ID# 923]*,**,* 34.00*,*08*,*A0*
*N*,*e*,*N*,*Y*,*CAN3-Z299.0-F86 (C1991)*,*Guide de sélection et de mise en pratique des normes CAN3-Z299-85 de programme d'assurance de la qualité [ID# 921]*,**,* 34.00*,*08*,*A0*
*N*,*x*,*N*,*Y*,*B95-1962*,*Surface Texture (Roughness, Waviness, and Lay) [ID# 375]*,**,* 14.00*,*08*,*B0*
*N*,*f*,*N*,*Y*,*B97.1-1970 (R1992)*,*Standard Tolerances for Linear Dimensions, Inch and Metric (a:3) [ID# 378]*,**,* 14.00*,*08*,*B0*
*N*,*e*,*N*,*Y*,*B97.1-F1970 (C1992)*,*Tolérances normalisées pour dimensions linéaires, en pouces et métriques [ID# 377]*,**,* 14.00*,*08*,*B0*
*N*,*f*,*N*,*Y*,*B97.2-1970 (R1992)*,*Interpretation of Limits and Tolerances (a:6) [ID# 380]*,**,* 14.00*,*08*,*B0*
*N*,*e*,*N*,*Y*,*B97.2-F1970 (C1992)*,*Interprétation des limites et tolérances [ID# 379]*,**,* 14.00*,*08*,*B0*
*N*,*f*,*N*,*Y*,*B97.3-M1982 (R1992)*,*Tolerances and Standard Fits for Mating Parts, Metric Sizes [ID# 383]*,**,* 26.00*,*08*,*B0*
*N*,*e*,*N*,*Y*,*B97.3-FM1982 (C1992)*,*Tolérances et ajustements normalisés pour pièces d'assemblage, dimensions en unités SI [ID# 381]*,**,* 26.00*,*08*,*B0*
*N*,*f*,*N*,*Y*,*B97.3-1970 (R1992)*,*Standard Fits for Mating Parts, Inch Sizes (e:1) [ID# 384]*,**,* 14.00*,*08*,*B0*
*N*,*e*,*N*,*Y*,*B97.3-F1970 (C1992)*,*Ajustements normalisés pour pièces d'assemblage, dimensions en pouces [ID# 382]*,**,* 14.00*,*08*,*B0*
*N*,*f*,*N*,*Y*,*CAN3-B232-75 (R1983) (R1989)*,*Keys, Keyseats and Keyways [ID# 622]*,**,* 16.00*,*08*,*B0*
*N*,*e*,*N*,*Y*,*CAN3-B232-F75 (C1983) (C1989)*,*Clavettes, logements et rainures de clavettes [ID# 621]*,**,* 16.00*,*08*,*B0*
*N*,*x*,*N*,*Y*,*Z85-1983*,*ABBR--Abbreviations for Scientific and Engineering Terms [ID# 2227]*,**,* 30.00*,*08*,*B0*
*N*,*f*,*N*,*Y*,*Z99.3-1979 (R1989)*,*Graphical Electrical Symbols for Architectural Plans [ID# 2245]*,**,* 14.00*,*08*,*B0*
*N*,*e*,*N*,*Y*,*Z99.3-F1979 (C1989)*,*Électricité--Symboles graphiques pour plans d'architecte [ID# 2244]*,**,* 14.00*,*08*,*B0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z234.1-89*,*Canadian Metric Practice Guide [ID# 2412]*,**,* 29.00*,*08*,*B0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z234.1-F89*,*Guide canadien du système métrique [ID# 2676]*,**,* 29.00*,*08*,*B0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z234.3-89*,*Guide for Selection and Use of Preferred Numbers [ID# 2631]*,**,* 58.00*,*08*,*B0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z234.3-F89*,*Guide pour le choix et l'emploi des nombres normaux [ID# 2765]*,**,* 58.00*,*08*,*B0*
*N*,*x*,*N*,*Y*,*CAN/CSA-Z234.4-89*,*All-Numeric Dates and Times/ Représentation numérique de la date et de l'heure (Bilingual standard/norme bilingue) [ID# 2632]*,**,* 28.00*,*08*,*B0*
*N*,*f*,*N*,*Y*,*CAN/CSA-Z234.5-89*,*Data Elements and Interchange Formats--Information Interchange--Representation of Dates and Times (Adopted ISO 8601:1988) [ID# 2633]*,**,* 28.00*,*08*,*B0*
*N*,*e*,*N*,*Y*,*CAN/CSA-Z234.5-F89*,*Éléments de données et formats d'échange--Échange d'information--Représentation de la date et de l'heure (norme ISO 8601:1988 adoptée) [ID# 2884]*,**,* 28.00*,*08*,*B0*
*N*,*x*,*N*,*Y*,*Z351-1980*,*Glossary of Metric Units [ID# 2213]*,**,* 14.00*,*08*,*B0*
